Sundown Audio

At this time these are just known as the "X10 and X12" speakers. The photos are of the first prototypes. I am already working on revising the prototypes with several important improvements. These are geared towards "daily beating" and are made to be used as a pair with either an SAE-1000D or SAZ-1500D. Sound quality is good, but output at moderate power levels is the number one goal. * Basket with extremely long clearances. The motor also has enough clearance to travel over 33mm rearward before bottoming out, this is well beyond linear coil travel limits. * Vented pole and vented gap for increased power handling. * The cone is a fiberglass weave with paper composite ba…

Well it seems that the upcoming amplifier line up is strong. So what's it look like for subwoofers. The E8s and NightShades look like they're doing well. I've seen the talk about "monster subs" but is there anything else in a lower power range (750watts or so)? Something in between the SD1s and NightShades that a pair of them could be powered well by a single 1500d (or the upcoming 2000d).

I am not planning an 8" for this line any time soon... but I am planning 10s, 12s, and 15s... also... I do not have an ETA just yet, first prototypes are on the way then testing will be in order for a while to make sure the design suits all of my requirements. Just though I would offer a sneak peak of the 15" model. Initial MSRP also posted... may be subject to small changes based on tweaks needed. I AM planning to use spring loaded push terminals on production... I don't like the spade connectors. Some T/S Specs measured on the Klippel machine at the factory... I will measure them myself as well once my prototypes arrive. 10" S4 Coil MSRP: $130 Re: 3.86 ohms Fs: 31.8 Hz…

Just picked up my new Sundown 3500D's this morning with Eastern N.C.'s Rep and good buddy DJ Williams. Left out this morning at 4:30am (now that's devotion) and braved the bad traffic going and coming back from Jacob's shop. Let me tell you, yall ain't ready for the new amps! They look fantastic and have got me excited enough to get right to work on getting my upgrades installed. I am a little tired, a little hungry and well- I don't have to tell much more than that....LOL. :bigclap:

I heard a rumor from a local Team Sundown Member that there is a Sundown 125.4 on the way..... How true is that?

Something we are working on... Was designed around the needs of our NEO-8 project : Project I'm Working On - Car Audio Classifieds But will eventually find it's way into other projects... I've started a new Ferrite 8" design to be used with this frame... depending on the cost / performance may move up to X8 designation (based on motor the size of the SA-12). It is a bit over-sized from a standard 8" cut-out and OD but that was needed to get a large spider on an eight finally ETA not set yet... but keep your eyes out !

I just seen in another thread a pic of a 2000 watt Sundown Amp? Ne info on them yet or anything?

this is part of my new sq install which consists of a premier 880 prs head unit morel hybrid ovation6 set RE XXX 12 the install inst complete yet but , i just couldnt wait to post it ... any feed back will be appreciated the laser etching was pretty cool to watch ... took about ten minutes and was totally worth it ... cant wait to light it up with blue l.e.d.`s

Well since I always see so much talk about new sundown products, figured I might as well throw out the possibility of full-range coax and or component speakers. I would def. be more interested in the component speakers, especially if individual drivers designed for active or custom built passive x-overs.

Just bought an saz-1500d off ebay, and I am anxiously awaiting it, as I have heard many good things. I'll be replacing a Audiobahn a3201t that I've had for 3 yrs, pushing 4 mtx thunder 5500 10's. One question though.. will it have full manuf warranty since it's been refurbed by factory, or not? Thanks

Well all I have to say is thanks Jacob. I just got 2 1500d's, let me tell you they are strong amps!!! I can't wait to get the other 6. I did manage to do some testing... I will just say this 2 1500's are louder than one Stetsom 7kd in my vehicle, on 12volts.

So... I want to do something for real this time and actually get a vehicle that can handle some weight and still drive around without issues. Concerns about driveability have really hampered my previous plans for something large. I really do NOT like driving huge vehicles either for the most part. I happened across a really interesting vehicle by chance on Craigslist last week and decided to pull the trigger ! 2006 Chevy Express 3500 w/ Duramax Diesel Engine! I test drove it and it was alot more comfortable for me to drive than most huge vehicles and has some real power behind it as well. I am looking at mostly music and mostly impressive demoing but would plan to compete…

So...when do the specs on these get released? Very interested in the 4000 variant.

Ok got a little creative mood again, and someone had asked for a blue theme sundown wallpaper so I came up with this today, hope you guys like. You can download the zip which has 3 sizes from 1920x1080 to 1280x720 here Sundown Wallpaper 2

First to post it. HA HA All BS aside I really like it thus far.

I already have 3 sa12s. i want to add 3 more subs and add another amp. If i were to buy 3 sa-15s to add to my system would the box need to bey chambered between the two different size subs or could they all be in on chamber? and anybody know if jacob started back taking people for team sundown?

alright im putting a new system in my 2004 pontiac grand prix here are the products Pioneer AVIC - Z2 2 Concept 9.2" headrest monitors 2 Sundown 3000Ds Two FI BTL 12"s fully loaded Now here is the question i have a sound stream BX-12 sound proccessor with 13.5 volt sub outs and also a Fusion EQ/CROSSOVER/LINE DRIVER with 8 volt sub outs. Now I should i include either one in the setup or im also looking in to getting the AudioControl DQS with the digital Control PAD. RCA's are high quality Kicker shielded cabling. If you need more info just post or PM me

Well few of you know the tranny went in the buick that i planned on walling off w/ a pair of 3518's. Well i deside to start looking for a 88-98 silverado or siera to do a cut thro on. Well yesterday i ordered my second set of Digital Designs 3518's. The new system plans go as followed. Head Unit : Panasonic CQ-VD7003U w/ Panasonic CA-DC300U Ipod Adapter and 2GB Ipod Nano Sound Processors : Audio Control Three.1 Subwoofer : Digital Designs 3518's x4 Subwoofer Amplifier : Sundown Audio SAZ-1500D x4 (each pair strapped @ 1) Subwoofer Enclosure : 28ft^3 @ 35hz Wall Mids : Seas CD18RE-MDS H1426-04 x12 Highs : DLS Iridium x4 Mids and Highs Amplifier : Sundown Audio SAX-100.4 x2…

Hi, I have just sold my Mmats 3500.1 amplifier as it didn't have the subsonic option and I just wanted a change... I was looking into a Sundown 3000 amplifier but after speaking with our UK dealer (DirectIce) I have been advised they are being replaced with the 3500 version. He is still looking into if he can get hold of the 3000 for me, any ideas and prices for both? In

whats up yall

First off, have to give a big thanks to Jacob for allowing me to use the Sundown logo, and for supplying me with some hi-res jpegs. Finally got some free time in one of our CNC's and got this in. All i have left to do is paint the lettering to make it stand out more. Something wrong with the way the pic came out on this one on the "audio" shape Now to do the other one.

this is the one song that doesnt flex so much....lol from a show yesterday ..... did a 153.1 and a 149 bassrace with 3 subs and 6 amps. had broke a set of amp jacks i didnt know about!!

Hey Guys. It has been a while since I posted on here. I finally have both of my Sundown Nightshade 15's and new enclosure in and we did some vids of the Kia in action. As soon as my buddy gets them downloaded, I will post them on here for you guys. All I can say is that everybody was impressed with how this thing hammers on only 4,000 watts. The flex is just crazy and it has no problem at all playing in the 20 hz range. I hope to have them posted by tomorrow sometime.

Hi Sundown or whoever can help me. A few questions. What is the main differnces between the new and old amp? How long can a amp be in a shop before it go's bad. The thing is; they dont sell any of these amps as most people here are into SQ. Im just worried I buy the thing and it gives me troubles.

New Warranty policy stipulations effective as of 10-2-2008 within the USA: 1) If your amplifier has a blown power supply or damage from excessive vibration there will be a charge for a warranty replacement within the 2-year policy: * SAZ-1500D and smaller amplifiers (or any future model under 2000 watts) - $30 in the continental USA (AK and HI add $15) * SAZ-2000D and SAZ-3000D (or any future model 2000 - 3000 watts) - $50 in the continental USA (AK and HI add $20) 2) If there is no obvious sign of either of the above the warranty replacement within the 2-year policy will remain a free replacement. 3) For either free replacement or flat-rate charge replacement the amplifi…