Sundown Audio

I'm planning on buying a 15'' DC lvl 4 sub (1000 rms, though underrated) Not sure if I want to have it ported or sealed yet. Its a daily driver, No competitions or anything like that. I have an SAE 1200d and an SAZ1500 Which one do you guys think I should use to power my sub? I don't plan to upgrade from this, and I will never strap on another amp. I have a pretty weak electrical so If one is more efficient than the other please let me know. Is the SAZ worth the extra money for my application? I'm going to be selling the one I decide not to use.

Mr. FedEx dropped off 3 packages for me today. Sundown Audio Equipment 2x SAZ-1500D's 2x NightShade 12's One set is for me, one set is for a customer. Here are some pics: I'll have some build pics of the Mazda as I go.

so ill give you some info first truck - 99 s10 ext cab (no 3rd dr) 2 15" sundown nightshades 1 saz-3500D blah blah blah anyways, the box i orig. built for them isnt cutting it, so now im thinking 3/4 wall (i still want to be able to see out my rear view mirror) so can anyone help me with a desgin? im looking to tune to 35 hz, subs forward port... not sure where to fire it 43" long, 15" or less deep, 26-28 inches tall, 26 would be more ideal. this is for daily! not spl, i want it to slam the low notes, but sound good on every thing else. let me know what you guys think. thanks!

So my next install will consist of 2-saz2000 and 2-15inch NS d2 and i was wondering how much AH i should have on my batteries to support my 2 saz2000 straped at 2ohm? i know i read somewhere that if it is at 1ohm just take the fuse size and divide it by 2 and there you go! so for 1 saz2000 at 1ohm i would need a mini of 100ah battery to support it! now i am wondering, i got a good deal on some nsb 90 (90ah) and i can't pass up the deal but they are only 90ah each and i want to get 2 of them. now will this 90ah (180ah total) be enough to support 4krms at 2ohm? thanks for your time Kenneth

One of the screw of my 1500D broke (the head) and was a real PITA to remove, but now i need a replacement. Any suggestion? Thanks

i have a 3500d if i run it at 4 ohms would i still need to upgrade to more batteries and alt or could i just have the big 3 done.

help us get mythbusters to check out the real myth post vids and comments to let them know how big our community is !!! http://community.discovery.com/eve/forums?a=tpc&s=6941912904&f=5261919888&m=92219659201&r=55419260301#55419260301

I have six used SAZ-3000Ds available at this time : Good Condition New Casing -- Used Amplifiers * $675 each with 1-year warranty

4x Used SAZ-3000D Available ! All in great shape -- all come w/ 1-year warranty. They all come in original box w/ remote. $625 each shipped in continental USA.

These subs will be built with used or blemished motors (cosmetic issues only). They do not look horrible but they do not meet my spec for cosmetics. 12s and 15s only at this time ! 15s -- $320 12s -- $305 SHIPPED in Continental USA. At the blow-out price we will be offering simply a no-DOA guarantee (they will be guaranteed to work when you receive them and no more). I do not have very many... so act quickly if you want them. These will have the newest aluminum pole plugs + the new steel spider bolt down rings. They will use a silver 12-spoke frame. * Steel spider bolt down ring. * Silver 12-spoke * Blemished back plate * Another photo

Just checking to see if anyone here is going to make it to this show?

Had a few requests for videos. Made one playing "Trap or Die" by Jeezy. Seemed to be about the same on the meter door open or closed. Link to video : Four of the new SA-12s being used on two 3500Ds @ 1 ohm each (turned down of course as these are 600-watt rated subs).

Okay here is my somewhat problem. I have a 3000D with a Bass knob and I am trying to figure out how to get this Gain Knob set right. Now I have my gain set, and everything right on my deck, my thing is when I plug in the Knob do I set it to minimum or Max, or do I set the Gain and deck with the Knob already plugged into the amp? I am trying to get it where I can just turn the knob to turn up the gain instead of the deck, which is a pain in the ass. Because as of right now when I turn up the Knob it reaches it full potential at about half instead of max, so I really cant get it to where I want it with that small of a range. So am I doing this sh*t right or what. Thanks En…

I was reading the instructions, but I don't quite understand them. I would really appreciate if somebody would explain how 2 do this.

I finally got the amp installed and I have to say I am VERY happy with it. It is clean and crisp. I am rinning 4 infinity kappa 6.5 2 way speakers. I got the shipping conformaton on my saz100d so it will go in next week. I just wanted to drop a line and to say this thing rocks. Anyone wanting to step up their system but dont want to go real big this thing is perfect. It was way louder than I expected. Good job Jacob.

I finally got this box built and a chance to test this speaker out. It is replacing 2 15" polkmomo drivers on a crunch amp. The box is roughly the same size as the other but this one lets the seat lock into the up position. It is about 3.25 ft3 at 35hz. There is no bracing or 45's in the corners. Its facing up right now as I find a place for the amp(s). But it sounds better forward. I know its a little ghetto but Ive just recently started building my own stuff. As you can see it is hooked up to the SAX125.2. It is bridged at 4 ohm so its only about 450 watts. Gain up halfway and it still rocks. This driver sounds very nice. This driver is of high quality and great sound.…

I've seen this asked before and I thought I knew ""Best Practices" but then in reading, I discovered there are some things about the PRE inputs on teh Sundowns where they don't like certian ""Higher End" RCA cables... Who woulda thunk it???? So, if that was unknown to me, what else is, you know... So my question/scenario is I have: Headunit - Front Stereo Preouts to SAX125.2 Pre-Ins Headunit - Rear Stereo Preouts to SAX 125.2 Pre-Ins No question there, next is the question part. I will be running (4) SAZ-2000D, if I can ever afford the rest of them.... Trying for by Christmas... Should I run from Head Unit Sub Pre Outs w multiple RCA Y Adapters to SAZ-2000D Pre-Ins He…

i need some help. im using a sundown saz 2000 and i cant decide what subs to use. fi bl 16s or the nightshade 15s. im having a box made for which ever i decide and theyre goin in a focus hatchback....no wall tho

Who has tested how much power these will take? Will they hold ~1500 watts a piece for around 30 seconds

SUNDOWN!!!

Well, my wife entered the truck last Saturday because it looked like it was going to be a small show. Shortly there after the other cars rolled in and although a smallish show we had to go up against 5 other cars. She took home 2nd in sound quality against the likes of Audison, Hertz, Zapco installed cars. We would have been trailing just behind #1 if it wasnt for some gain hiss and a turn off (mechanical) pop....JAKE you need to get this problem handled. (amps in the cabin and it is indeed mechanical noise). Other than that, with 1/2 hour of tuning and a 2nd place finish is prety nice. We are seriously thinking about doing SQi @ West Coast Regionals (my comp car is …

Leaving today after UPS picks up... will not be doing much e-mail while I'm gone, just a heads up

Well I finely went out and worked on the van, I haven't touched it since this weekend. I pulled the sub out that I knew had problems.

Hmmm...

You should do a couple of Highres Sundown Backgrounds for PCs.... A few with just the Sundown Audio logo, then maybe a few with one of each Sundown Amps or one with each amp and a one of each pair of drivers... I have a laptop and three PCs at work that I like to cycle the backgrounds on...