Sundown Audio
Subforums
2,870 topics in this forum
-
by looking at your products alone you know your shit about subs. i have a pair of 10's i had built for me a couple years back 60lbs each so there is some serious magnets on them. the bl/re in series is only a 92 im guessing this is due to the coil. if i had it rebuilt to something with twice the motor strength what could i see in output diffrence? current coils are round copper 8layer not sure on what the rest of the specs are. i know they could use a spider spacer for more travel they will hit the top plate before the coil can bottom. is it possible the charge is weak on the magnets?
-
0
Reputation Points
- 9 replies
- 1.8k views
-
-
I am just wondering, coming from an Sq person to spl, I still tend to choose amps for clean power and heaps of headroom, size is never really an issue (as in footprint) as I will make it fit. I rarely even look at features as well. (mostly because I am running active, all I really need is a gain.
-
0
Reputation Points
- 11 replies
- 1.8k views
-
-
just curious as to what everyone else is tuning at for daily. right now i have a single 15 Nightshade at 32 hz, but i heard that 35hz was better? im looking more ground pounder style then ###'s on a meter. so what is everyone running and tuning wise?
-
1
Reputation Points
- 13 replies
- 1.8k views
-
-
I was just wondering what store actually has some of these in stock.....Looking to upgrade from my Type-Rs and I believe this would be a good upgrade...What are you guys opinion???
-
0
Reputation Points
- 15 replies
- 1.8k views
-
-
Due to all the negative comments that were way out of line imo on the announcement of the new SAZ-2500D. I think Jake you should post a sticky stating that all Sundown Products and specifications are subject to change due to continuing upgrades, modifications and improvements! This would help clarify to all that Sundown continues to develop and improve new models and older models will be phased out.
-
1
Reputation Points
- 14 replies
- 1.8k views
-
-
The new NS-1 production run started last month and is due mid to late April coming up : NS-1 -- Website page with details. 6500 watts rated @ 1 ohm Regular cost is $1900 PRE-ORDER COST IS $1500.00 shipped in the continental USA only. AK and HI get quotes from us or your favorite dealer. During the pre-order you can order from us via Paypal to [email protected] or call 704-528-9700 Ext : 3 and order with Debbie over the phone. You can also order from any local or online dealer. International contact your local distributor or online dealer.
-
0
Reputation Points
- 3 replies
- 1.8k views
-
-
Hello Guys..I want to be convinced that I need to Purchase one or your Saz-1500d amps...I currently am running the Us amps Xt4000d and my Fi BL 15" Seems like It still needs more Power...It is fully loaded in a 4cuft@30Hz enclosure. My current amp just doesn't put out what I think the Fi speaker can handle...I really like your Amplifiers and would like to be one of the team...Could one of you who acutally own or make the amp give me some input about how it performs at 1 ohm....I really want one so my Us Amps amp went on sale today...Thanks guys..
-
0
Reputation Points
- 10 replies
- 1.8k views
-
-
The SAZ-3500D is the successor to our extremely popular SAZ-3000D model. It is not only more powerful but even more reliable than the SAZ-3000D based on years of research in the SPL lanes and in the hands of regular customers. You will not find a better 3500-watt Class-D amplifier anywhere! Sundown Audio only recommends this amplifier for experienced users with an upgraded alternator and additional batteries due to the enormous power output potential. Hello Jacob, I have 4 XS Power D3100 as secondary batts and a Yellow Top under the hood and a DC Power 320 amp alternator (strongest the company makes for me) and both of my SAZ-3500Ds are going into protect when I compete.…
-
1
Reputation Points
- 11 replies
- 1.8k views
-
-
Congrats go to Luz Carter, Team Sundown Audio/Image Dynamics in the MECA SOUND QUALITY Stock class format. She went undefeated this year and pulled off State finals by a close 1/2 point. Sundown isn't just for the knuckle draggers anymore. lol
-
0
Reputation Points
- 10 replies
- 1.8k views
-
-
Ive been loooking for the past 2-3 weeks and cant seem to find someone selling it.. I cant afford 1000$ for a brand new.. So im looking for a used one.. Need to push my AA mayhem 15 with it or if anyone has a 15' nightshade v.2 i would be really interested in buying that too!!
-
0
Reputation Points
- 14 replies
- 1.8k views
-
-
Ok, so I did an install for a friend in his 2009 Honda civic with a Sundown NS V.2 prototype and a sundown SAE-1200D and we have encountered sort of a serious problem. It seems as if there is some sort of a current draw coming from the amp when it is turned off because if he leaves his car off for more than 24 hours the battery is so drained that it can not start the car... The amp is definitely the problem because whenever I take the fuses out of the amp the car works perfect and there is no current draw. The amp also is completely off whenever the car is off (I checked) and is connected to the ACC fuse for the remote turn on since the car has a stock stereo system. I am…
-
0
Reputation Points
- 14 replies
- 1.7k views
-
-
im gonna be ordering new subs in the next 3 weeks and wanted to know what will be in stock, preferably 12 15 or 18s
-
0
Reputation Points
- 19 replies
- 1.7k views
-
-
I remember that the 1500D went on sale, just wondering when/if the 3000D will. If so what would the price be? Heh, thanks.
-
0
Reputation Points
- 3 replies
- 1.7k views
-
-
-
-
Thinking of a change from the BTL and going to 2 15s before I sell the whole car next year... I always wanted to give them a run... And sundown amps are the chit so the subs can't be far behind... If I need bigger I have room. Car is a 02 caddy deville. blow through type design or sealed off from the trunk is the way I wanna go. Just waiting on the new 100.4 and I'm done
-
0
Reputation Points
- 11 replies
- 1.7k views
-
-
What a great guy Jacob is. I am/was in a pinch with my amp and he has been such a help. He is by far the best salesman/business owner I have ever dealt with. If you are considering buying anything from Jacob DO IT!!!!!!! You will thank yourself later. Thanks again Jacob for all the help. Jeremy
-
0
Reputation Points
- 9 replies
- 1.7k views
-
-
i have a 98 eclipse and i am tring to decide if i should run 4 sa-10's on 2 1500d's or 2 ns 10's on 2 3500d's wondering which would be louder to the ear what do you guys think and i know you wont know untill its put in and tried just wondering about basic assumptions and what kind of opinions i might get
-
0
Reputation Points
- 11 replies
- 1.7k views
-
-
I am currently running a Kenwood eXcelon KAC-x40 for my comp set and I have had no issues with any whine or hum coming through my comps. However, yesterday after swapping out my SAE-1000 for the SAE-1200 I now have a whine in my comps when I plug the RCA's into it. With the volume at 0 the whine is still there. I think it is odd that I am getting a whine in my comps when plugging the RCA's into my sub amp. When I remove the RCA's from the SAE-1200 the whine goes away completely. Any insight into this would be more than appreciated. Thanks!!!! Head Unit: Kenwood DNX-5120 4-Channel RCA's: JL Audio XB-CLRAIC4-18 2-Channel/Sub RCA's: JL Audio XB-CLRAIC2-18 Power &a…
-
0
Reputation Points
- 17 replies
- 1.7k views
-
-
sundown audio is now on myspace its still under construction but its there check it out and add as friends sundown myspace
-
0
Reputation Points
- 12 replies
- 1.7k views
-
-
Does the saz1500 have a signal output, so you could run rcas from it to another amp? I'm thinking about getting a smaller amp for mids and highs and wanted to know if I would have to run another set of rcas from deck? Or if the saz could output it. Thanks
-
0
Reputation Points
- 11 replies
- 1.7k views
-
-
Are there sa8 recones available? If not do you have an eta? Thanks Steve
-
0
Reputation Points
- 8 replies
- 1.7k views
-
-
just bought a 98 Lincoln towncar and getting a temp system with a small footprint to keep trunk space. the car has a huge trunk but I only want to utilize the back deck portion of the trunk which measures 44w by 13h by 16 deep(could go deeper)... gives me about 4.24 cubes. any ideas or feedback is appreciated
-
0
Reputation Points
- 7 replies
- 1.7k views
-
-
Specs are per 8 subs 1/2 of the box, I used bb6 to calculate a box prism w/ a truncated edge, and basically doubled it and put both sides on top one another. Fb is actually the f3 on the picture, and the calculated fb for three 34" long 2"x10.58" ports @ 2.392 cubes is 45.26, but I did not take into account the flared aspect of the alligator mouth style of this box, but added it's length to the port length...so it kinda is a mystery.
-
0
Reputation Points
- 17 replies
- 1.7k views
-
-
Hey guys -- I am behind on emails... not ignoring anyway... will take me several more business days to catch up.
-
0
Reputation Points
- 15 replies
- 1.7k views
-
Who's Online (See full list)
- There are no registered users currently online