Sundown Audio

in truck 1st run 2nd run found out after 2nd run that 1 of my Rcas was dead

Originally posted by Drugban on SMD : 152.2 Db - 3x Sundown SA-8 and 2x SAZ3500D - SMD Forum ----- three SA-8 two SAZ 3500D bridge 0.66 omh.... two Optima 75 a.... frequency 60 hz 12.4 V....on metering 10.3 V metering //////////////////// /////////////// /////////////////

2x Sundown 3000d Strapped 2x Pierce Audio Subs ( New ) WMD^2 7cf ported to 52Hz / note played 52Hz 1 burp 3sec long / BAMMM 154.1db Temp yesterday off the scale Hot & Humid more pics later

Originally posted by Grigoriy Kashin on my SMD Forum : another 156+ from Team Sundown Russia - SMD Forum This is a burp only no-wall setup. ---------- Ok, I'm posting this for Drugban, to cut down on the LOLz over google translate This car is built for IASCA Advanced NW 2 class - everything is behind the B-pillar and beneath the window line. The car is a Russian Izh Oda, a compact 4door hatchback - currently in totally stock form with no sound deadnr at all (they will experiment with it over the week) The gear: subs: - two Sundown Audio z15v.2's d1 amps: - two Sundown Audio SAZ3500D's strapped @ 1ohm running on 16v bats - 3 Optima 5.5L Bluetops + two FIAMM 4v cells meter …

official 156,1 best 156,6db class up to 6000 Rms 2xsaz 500d @0,25ohm each 2xaq hdc12 2xKHC2000 +Hollywood Energetic SPV-120 plan for 2012 2500d---> ns1 aq ----> ????

hey jacob with 3 of ur 3000ds so far with my windshield losing its seal and moving 4" im doing a 157 at 39hz with my batteries not being charged for 4 months. solid solid solid amps!! cant wait to buy 3 more will post vids and pictures as soon as i get them. the van has a show to attend in 2 hours oh and btw thats my wall still being bare mdf and not curved or anything only gonna get louder!!! watch out bassracers haha

Just did a 157.2 w/ 1 3000d and 8 SI bm 10s 1987 VW golf think the concrete may have helped a lil bit

Originally posted by Derrick824 on CACO : ---------- 24x SA-12s 6x 4500Ds 12v system

158.7 at Meca E2 Audio in Ky.

We're working on a new build for the Excursion. 16 Sundown Audio sa-12s powered by 4 saz-3500s. Box sketch Close up of ports. Three 8" custom flared ports. Cutting the wood Laminating. The entire box will be at least two layers thick. Three & four layers in certain places. Starting the router work for the ports. I call this pic Cock & Balls. Lots more work to do. I barely got started on the port work. No where near done with that piece & I have two more identical pieces to build. Stay tuned...

160.3 at 30hz sealed on the dash. PROOF breaking a 160 behind c pillar at low freq's can be done. just not easy haha Good job Hank !

From the other night -- left number is dash and right number is kick panel. It's our new SPL project... so far we haven't officially stated what is in it so if you know (shhhhhhhhh) -- but we'll have it at a show soon then, of course, have all the info out there! It's mainly a burp vehicle and the absolute peak is 60 Hz but we have done pretty good numbers in the 40s range as well -- haven't really played lower than that as of yet. We did have it up to a 165.4 as well with a few tweaks.

yea I was wondering how I can get my hands on a 18 inch Nightshade??? Or even custom 12 or 15s..??? Thanks in advance guys

Will the Zv3's utilize the new frames or will they keep the ones they have now?

How does it sound for box size. 6th order bandpass rear chamber of 6 cubic feet @ 36hz and front chamber of 22 cubic feet @ 63hz. Wanting to get things started for a build next year. This is a spl only build.

* Dust cap... applied with three types of glue. 1) Green "special" glue to hold down stiffening disc (can't see the disc) 2) Black flexible glue to hold the cap to the disc 3) Clear epoxy to cover the height of the disc / cap combined around the edges * Surround is applied with flexible black glue as well * Triple joint - the cone doesn't meet the spiders, so it's a "dual triple joint" setup. Used glue all the way across the gap. Spider also glued down with "special" glue (yes, it's green) - then the gap between the outside of the spider and basket filled in with green special glue. * 18" 6-spoke doesn't have windows so spacers used for venting. ---- The green glue is e…

Got my new toy in today....pictures dont do this thing any justice..at all... Insanley massive......Makes me want to order another one.. I got gain and bass boost at 1/4 and its slamming already....I can not wait to turn it up and see what it really does..but at 14/35 on the volume...the lows are crazy..... Gonna break it in for a few weeks at low volumes though.... Powered by 1 of my SAZ 3K's and 3 DEKA's..... Thanks for a bad ass sub Jacob.....was packaged great to...arrived here in top notch shape. Will post more pics in a short while...as well as a video...

Got these Wednesday after a trip to Sundown's shop. He had some pretty cool stuff laying around. : Well, heres the pics. Haven't even hooked anything up. I have nothing to put it in. Oh well. Sorry for the crappy pics. From cell phone.

This Bronco belongs to my good friend, Brandon. So far only a single SAZ-1500D for power @ 1.33 ohms, single run 4 awg power wire, stock alt, one Powermaster D3100! Coming soon... dual alternators and two SAZ-3000Ds! Video uploaded shortly. This box is tuned to the mid 20s and was made for daily low-bass pounding His goal is to bass-race with it and not to generate peak scores, what class is to be determined.

I got first place in my class at a small local show with 3 RE SX 15" tuned to the low 30's and two sundown 1500's. My score was 147.2 playing a test tone sweep since I dont know my peak freq. We didnt even know about the show, and was actually headed to my family reunion when I saw guys getting metered outside of a car audio shop. I could get better numbers with a box tuned higher, but my setup is for LSQ, and I really like the SQ of my current setup. with some tweeking, I believe I can get 150db with my box, but I still havent had a chance to tweek my system with a mic. The SAZ 1500 is a badass amp that allows for a lot of flexiblity with installation.... I cant wait t…

decided to take a quick video. No tuning done yet, just fired it up and shot a quick video before I got yelled at.............lol Just a pair of 10's:

Originally posted by Greg Kashin on SMD : SA12+SAZ3500D = 150.4 - SMD Forum ----- Bringing out teh fartcanons...duck and take cover This is yet another SPL set-up from my team-mate Drugban. I've decided to save you guys from the usual on-line translator description fail and post this myself The car is yet another 4-door, small, Russian hatchback this system is being run on just two 75ah BlueTop Optimas - car is off as there's no wiring...voltage drops from 12.6 to 10.8 on the burp sub - one SA12d2 in about 1.5 cubes, 8" flared port. tuned to about 73Hz amp - one SAZ3500D @1ohm car peaks at 56, so burps were done at 56-57 on to the pics Pretty good for you perfect…

SA-8 D2 w/ Aluminum SPL Coil -- I had a thread about the idea here : http://www.caraudioclassifieds.org/forum/showthread.php?t=53745 151.6 passenger side kick measurement at 68 Hz. We haven't re-clamped since moving stuff around but it was clamping 1670 watts yesterday at 151.0 dB -- HU volume hasn't changed, we simply moved stuff around so we are assuming power isn't a whole lot different. We are going to get another video soon as well... we got a 152.2 in the driver side kick panel. Haven't had time to do a video just yet.

So i figure what the hell might as well post this up, this was at Midwest SPL Finals (so its legit, best ive done is a 150.5 with these, just not at an event, and it was much colder of a day when i did that compared to this). this metering style is on the glass (like db drag) but with windows and doors able to be open during the run. and yes, i lost to an AQ HDC3, but thats not the point of this LOL system is in a 1997 chevy cavalier, box is around 5 cubes with a 6" aero, burps at 42 hz, enjoy the vid (best if watched in hd)

Vehicle: 1992 Ford Festiva System setup: 2 layers of peel and seal on the roof, hatch and entire cargo area from bpillars back... 160 amp ohio gen alternator, 950cca optima red top up front, xs 450cca in the rear... big 3 with accel 2 guage power and grounds....head unit - jvc-kd-avx2.... amplifier - atomic 1000.1....american bass 4" coax (front and rear).... subs - 2 sundown sa8d2 version1.5's Space to work with in hatch area:: 35" wide 12"deep 16"high material: 1" NOVA PLY goal: MECA Street 1/ 142-145 @ the headrest Car peaks out at 50 hz with mic on passenger seat, drivers door open, passenger door closed, woofer on passenger side, port on driver side, woofers and port…