Sundown Audio

So what's involved in refurbing an amp? I wouldn't mind snatching up that 1500D, but I don't want to lay down four bills, only to be stuck with a large paperweight just out of the 90 day warranty. Jacob, hows the reliability rate with the refurbs?

Well, hi to everyone at sundown. From what I can find it seems that this amp isn't quite out yet? I currently have 2 memphis 4ks, and was about to buy 2 more, but I'm wondering if there is something better out there before investing memphis. There was mention of a pre-order of 3ks for ~900each, which if I could dump off the 4ks quick enough I would be interested in buying 4 of them if its beneficial. After reading the thread on testing it seems they put out close to 4k at 1ohm, 14.4v? Please correct me if I'm wrong. While bias can be expected on a product forum, I'd really like to get some more info on these amps. Everyone seems to love the 1500s, and I've heard nothing b…

I just thought that I would post the results of our team from this past weekend's MECA event in E-town, KY. I didn't get any good pics from the show because it was cold and I was to busy trying to stay warm. Corey Mitchell 1st place in Drive-by 1 with a 120.5 30 second average 6 feet outside of the car. He is running one Sundown 1500D and one 12" PBX XS sub. Brent Howard 1st place in Amateur Street 3 with a 147.6 He is running one Sundown 3000D and two Audioque HDC3 15" subs. Derek Jackson 1st place in Street 1 with a 144.9 he is running one Sundown 1500D and one 15" FI BL sub. Jeremy McCord (me!) 3rd place in Mod 2 with a 147 I am running one 3000D and two 15" FI Q subs…

Walled truck... wall will hold four 18s but only has two right now. Only using three 12v batteries at the moment so power is limited Video is processing as I post this... so click in a few minutes.

I have an area with teh following dimensions for a box 10"high prefer 9.5" 32" wide 16" deep prefer 16 but 18-20 available anyways,,, is it worth gettin the 3rd sub? will i have room? or will 2 be fine anyways ,, and 3rd wont make any sound difference? i know there is a wait on em, im already planning as i save up money its for a 63 impala.. im sik of people saying you have to use JL and all these overpriced underperforming brands, and i wanna shock people with 8s LOL ideally i would vent thru the rear deck or evenbetter through the small stock speaker hole in the top center of the back seat (i think about 6" around) with the subs facing back into the trunk, that would …

hi everyone need some advice on a custom built box for a single 12 inch sa-12 2 ohm sub. I'll be building the box with 3/4 mdf wood and the space i have to work with is 41 inches from left to right and 17 inches in depth. the car the sub Will be going in is a 2001 kia sportage ex small size suv and the amp i will be useing is a pyle plad3300d which puts out 1200 to 1300 watts at one ohm. now i never built me a custom vented box before but i have built a few sealed boxes in the past so my skill level for building a vented box is low. the music i listen to is rap and hip hop and my goal is to more daily driving and a little competition so i want the most spl i can get but w…

making the debut show this weekend at elite audio meca sc state sound fest. 1 ns 12 and saz-2000 in a mazda ext cab.

Will both these amps work on 15+ Volts right out of the box? Thanks,

My next build will consist of 4 SA-8's with whichever coil options I need to see either a 1 ohm or 2 ohm final imp. Box will be 2.4^3 net tuned to 32Hz subs up port back. I already have an AP15001D so I could get a second and make an AP30001D. Would be cheaper than the AQX2500.1, but I don't know if the 8's will take 750 a piece daily. I know the AQX2500.1 would be pushing it already. I have ran double rms to an AA Chaos 15 with my AP15001D without any problems. So I know how to watch my system for signs of stress and properly control my volume and gain. Electrical will consist of 140 amp HO Alt, Optima Red Top under the hood, Big 3 in 1/0, 1 run of 2/0 positive from fro…

I understand that the 100.4 is 4 ohm stable when bridging. My question is, say I were to bridge the amplifier at 2 ohm putting out the same power as if it were at 4 ohm. So 320 x 2 at 2 ohm instead of 320 x 2 at 4 ohm. Would this still be unstable? The speakers are rated at 320 watts rms as well. The reason I am asking is I can get the same speaker in a 2 ohm version at half the price of the 4 ohm version. Thanks guys!

Well I am going too try my luck in Meca when the next season starts in their amateur street class. I am going to do AS1 or AS2 not sure yet, and I just joined up with Team Apocalypse. The equipment being used is one 15" AudioQue HD3 and a Sundown 1500D or 3000D depending on which class I am in. I am just playing around for now with fuses but here is a vid of my HD3 in a 32hz box and one 1500D. What ever class I am in is looking promising right now. Sundown FTMFW

Figured I would update since I haven't been on in a while. The 1998 Explorer that has 4 DD 9515D2 and 2 Sundown SAZ3000-D won a USACi World Championship in SB4 with a score of 156.5.

Shop will be partially closed next week. We will still respond to as many e-mails as possible and as many products as possible will go out. We will not be open for phone calls or be at 100% shipping / building capacity. Don't worry, though, after next week we'll be back to work and we'll have an extra worker at least for the summer ! Also -- bit of a hiccup this week. My accounting / book keeping computer went out over the weekend. I ordered a power supply for it next day air yesterday -- still waiting on it to arrive to start going through orders to enter and ship. Hoping it arrives before lunch so I can get some work done today!

im goin back and forth between the 2. i think it would be badass to see peoples reactions off the fact that its 8's hittin that hard, but at the same time im really lookin for hard hittin mid and especially low bass wich is what makes me lean towards the 15's. so yalls input would be greatly appreciated.

I am considering an Eclipse CD7200 Mk II, which has 8v pre-outs. I'm wondering if there is going to be a compatibility issue since sundown amps are specified for up to 6 volts.

Running a strapped pair of Sundown 1500d's at 2ohm daily, and .5 for comps. Kinetik 1400 up front, two 1800's in the back. Or, to the point, will an excessive amperage 200a be ok?

Jeep Cherokee Sport 4x Sundown Audio sa-15s (stock) (4th Order Bandpass Enclosure) 2x Sundown audio saz-2500s 3x Mechman 300a Alts + Stock Unit 4x XS Power D3100s (12v) 156.3db off 4700w clamped power Jared can do a 3-round bass-boxing average of 155 dB or so... and the guys said he has done 157+ on burps. Withe one sub down from too much demoing Jared managed a 154.1 three round average at the Macon, GA show on Sunday -- on Saturday he showed the full 155.0 dB average :thumbsup: BASS BOXING VIDEO : ---------- OTHER VIDEOS :

Will Sundown have a booth in Daytona and/or bringing any products down to show off or sell? I'd like to see these new Nightshades in person.

hey quick question can you run the 3000ds daily on a 16-18 volt system. i think jacob 4 3500ds on six 16 volts right, do u think that many batteries would be necessary with just the two 3000ds. also I can turn my voltage up to charge such a system.I see that the 4 channel that sundown makes only runs up to 16 volts will it hurt it at like 16.5 17.5. I figured it would just be cheaper to sell my yellow tops and switch to 16-18 volts and get more power from what I have. but I would also need a four channel that can run on such a system. (if there is one) what does anyone suggest.

Todd Mayton - Twisted Mayhem Amp(s) - 2 Sundown 1500d's Sub(s) - 4 T3 TS 12's Amateur Street 3 - 1st Place - 145.5 dB Drive-by SPL 3 - 1st Place - 121.2 dB Daniel Kirkland - Twisted Mayhem Amp(s) - 1 Sundown 3000d Sub(s) - 4 True Bass Solutions 10 inch subwoofer Modex 1 - 1st Place - 148.8 dB Bryan Mayer - Twisted Mayhem Amp(s) - 2 Sundown 3000d Sub(s) - 12 True Bass Solutions 8 inch Ultra's Street 4 - 2nd Place - 146.2 dB

Hey there! I have this awesome little subwoofer that i have barely used more than a few hours - and the surround in a small area is comming up from the landing. i heard chuffing in a sealed box with the grommet and thought there was an air leak. upon further inspection i came to notice that the surround was not fully adhered to the basket surround landing! this is a project for a customer of mine, and i have already sent an email into you via your web support contact form - but this is kind of an emergency, as i am supposed to be finishing the fiberglass box for him this weekend - i am about 50% done with it and i am going to push forward with the baffle and port still -…

I am pleased to present one of our national records, established in Italy by the team sundown audio Italy - Team Dore. This machine has made the record in a category with many limitations, only 1 subwoofer, 1 amp, 1 battery, in a small hood! A "bullet A" style but with a limit of 60hz!!!!!!! This machine has 1 Nightshade 12" v.2 D1 SPL coil 1 Zapco 7500 (expect our NS-1 to improve) 2 Battery limited space, limited at 60hz ... a great and hard work for 1 year National Record at 154,3db in standard position (on glass) term-lab. a small picture on the box that shows the work and here is the video of the race I hope that jacob is happy with our work

http://www.facebook.com/#/video/video.php?v=1258050525783&ref=mf

http://youtu.be/1t8onY0QjEY