Sundown Audio

I would like to know where the amps are made, China or American? Thanks

going to be running the 100.2 or 125.2 on my 2 sets of PG rsd 6.5" components, so i wanted a matching sub amp. so i figured the saz1000d would be a nice match, nearly the same length in size, etc. so, how many subs should i run off this 1000d, where each sub wont be getting too much power for a daily setup? its for the back of the dakota, its a single cab, so not alot of room at all, thats why im thinking about going sealed, and jacob said they do good in about 0.2 cubes each.

I am using a SAX100.4 to power my ID OEM mids and Focal tweeters. Channels 1 and 2 go to the tweets and 3 and 4 go to the mids. They are being crossed over in my Alpine CDA-9887. SO my question is what signal will be present at the 100.4's RCA outputs? Does the amp sum all the signals together so I will have a full range output there or does it just use the inputs from channels 1 and 2 or something? I want to run some rear fill in my Acura MDX and I was thinkin about picking up a SAX100.2 but I dont know how to get a full range signal to it because my deck only has 3 preouts. Any ideas or suggestions are appreciated.

You read that right guys... $750 for SAZ-3000Ds, brand new with warranty. There are no quantity discounts - that is the price each. Get them while inventory lasts!!! We decided to bring in 2009 with a bang of specials and sales Paypal me at [email protected] or talk to your favorite online or local dealer - all dealers are authorized to price match! Price in continental USA -- add $25 for Alaska or Hawaii. USA ONLY.

Hey Everyone I Was Interested In Buying 2 SAZ-3000 D Amps For My 2 FI BTL 15's Setup That I Will Be RUnning. I Was Wondering WHat You ALl Think About THese Amps And If THey Are Under Rated Or Worth THe Power. BEcause My Brother Is Saying To Buy 2 Hifonics Brutus 2600 Watt Amps. Also Do Yall Know If These Amps Have Lighting ? Thank You ~ Kent ~

Alright Everyone Here Goes Another Post. My Current Setup Is One FI 15'' BTL With A SAZ 2200 D Amp. Now I Was Wondering If I Put This Setup In A BMW if If Would Hurt The Amp Or Alternator/Battery With Stock Electrical. In The Long Run My Plans Are Having 2 FI 15" BTL's With 2 SAZ 2200D Amps Running A Total Of 4400 Watts. Also Im Planning On Having A In Dash Head Unit That The Screen Comes Out When You Turn It On And Also 2 Screens On The Headrests. Could Anyone Tell Me Some Info On The Electrical System What Would I Need For All This Whether It Be Battery's,Capacitors Or Alternators. Thank You ~ Kent ~

The next person that paypals me 5 dollars will get the inside scoop on what is going on at the Sundown HQ?

i was about to purchase 2 saz 3000d's when i realize the shipping weight was 2 pounds....does anyone know why this amp is only 1 pound....is that correct?

hi, i am going to be getting Polk Audio MM6501 speakers in a week. and i am wondering what roughly would an sax100.2 do at 3 ohms? i want to assume around 150rms since the rms doubles going from 4 ohms to 2 ohms. but wanted to ask just to be sure. thanks.

I have a payment for $5 here with no notes on it. Need to know what it is for. It is from 1-28-09

Want to know how 2 12" Nightshade would do in 2.742 cubes and on a Sound Stream xxx-6500d at 1 ohms?? I was worried about the box being to big I am only about a 1/4 to 1/2 up on gain right now on two Mass Destruction Napalm's and they sound good but are really made for a smaller box.. Also how much are the 12" version did not see it on the site or missed it.

Been searching but can't find out what ohm this sub is, is it 2 or 4 ohm? is it SVC or DVC?

Hey everyone...im getting 3 saz 3000 d's and it says that the 300 amp inline fuse is not included....where do i buy it at? ThNks, Freddy

A vote to have Jacob arrange his lines as such. Top end: Nightshade NS-4000D High end: SAZ-1000D, SAZ-2000D, SAZ-3000D "Entry" line: SAE-800D, SAE-1200D Vote yes if you like the idea, no if you don't

I just wanted to say thank you for your great products Jacob. I just put my system in the other day. It consists of 1-12"Sundown Audio Nightshade, a Sundown Audio SAZ-1500D, an old school USamps 4 channel powering a pioneer component set with a Pioneer Premier head unit. The Sundown audio equipment is amazing. Couldn't be any happier with the output. I haven't had it tested yet, but as soon as I do, I will post results. And the assistance making the box and everything about Sundown Audio, is what is going to keep your name and company getting bigger and better. I will definitly be telling all my fellow Army friends about your products, your company and best of all …

put it in this morning... spent the rest of day driving around enjoying it... first, let me state the system, 1/0 knu-con, in engine and to the back 230a, alt 110a idle? yellow top up front, kinetik 2400hc back 300a circuit breaker front, and back. stinger volt meter. with gain @ 1/2 on the amp, no bass boost, 1/2, or less boost from the alpine deck, at volume 20, 35 is max... one song popped the breaker. voltage held good, well not at idle, but did drop just below 12 at times when pushing it hard. the orion 2500 put up 147.2 when it popped the breaker, put I was pushing it way harder. So, I hated the breakers then, and do now... what are you guess fusing these amps a…

These are the results from Sundown Audio users at today's competition. All scores are sealed on the windshield unless otherwise noted. Two Kicker L5 15s powered by a Sundown saz-1500d. Two RE MT 12s powered by a pair of Sundown saz-1500s. Hardcore score. (door open, mic in the kick) One Sundown NightShade 15" powered by a Sundown saz-2000d. Sorry I didn't get a picture of my score but it hit 149.5db. Two Sundown NightShade 12's powered by two Sundown saz-3000s. Two Sundown NightShade 15s powered by a single Sundown saz-3000d. Hardcore score (door open, mic in the kick)

What is the exact optimal box volume, port opening (wxh) & port depth for two 15" NS vented tuned to 30~32hz

Guys, Need some advice on decidng on an amp. I buy audio equipment like once every 5 years so im trying to make an educated decision on this the first time. Ive done my homework to this point so thats why im going with Sundown. Vehicle is a Tundra. I am in the process of making a sealed console-style subwoofer enclosure to house two (2) 12" woofers (more than likely the new 12" SA series when theyre released). Each chamber will likely be 1 ft^3. The electrical is stock right now but am willing to do the big 3 if necessary. I'm trying to decide on which amp would best suit my needs both now and in the future. I know for a fact that I will not be competing (no desir…

Just wondering... Has anything more happened w/ this sub? Testing, specs, I'm not even gonna say that three letter acronym Jacob hates so much! I will be upgrading my system in about 1.5 years, and I am trying to get a head start on researching subs! Do you think you will offer the copper coil on these beasts to lower the Fs to under 30? Thanks man!

I want to put a 3000 per pair..... But i'm not sure how they will handle the 1500 rms each. Any better ideas?

iv'e been doing some reading and am thinking of buying a saz-3000d to run my Fi q series 15's in my system upgrade. my question is a ho alt a must or will i be able to get by on factory for a while ? i have been looking around for an ho alt for my car but it seems like it's going to be hard to find one. I have a 2005 sonata four banger not your everyday base mobile.

Jacob, Are there any plans on making a 6 channel amp? 50X4 125X2 or preferably 100X4 250X2? If so I can hold out. I really want a matching Sundown 6 channel. My other options are Mcintosh or Tru at least as far as I can find. And I hate to part with the green that those brands would cost me for no other benefit than the "Look what I got!" BS.

Well, I asked around over on CA, & EVERYONE told me that these beasts could handle it. (w/ proper electrical, of course) Planned elec. as of now: (2) D3100s in back, 240A alt, stock bat. up front, "Big 3", 1/0 all the way around. So what is your opinions on this? Can it handle it? Also, I read that the new SAZ-1500Ds don't carry .5Ω warranty coverage. What about the 3000Ds? And if the amp some how does fail do to this, what would it cost to get it repaired/replacement? (estimate) BTW, these will be powering (2) HDC315 alum. models.

Hi, i run a Fi BTL 15 fully loaded on a Rockford T20001bd. I was thinking of running it with the saz-3000d. Worth to upgrade? And where can i buy sundown gear in germany?? Any Input?