Sundown Audio

I read the instructions in the FAQ's section but i'm still somewhat confused. If i have (2)saz1500s strapped together i will still be getting a (1ohm) load correct? I am going to be running (2)FI BL - dual 1 so will run into a problem strapping these two amps together for my setup? Should i look into purchasing dual 2's instead

Umm I put this here since its for team member only. I guess you may move it don't really know 1. Product: 2 SAZ-1500ds 2. Specs: Um I think we all know what they do if you really need specs PM me 3. Description/Condition: One is mint other than where the screws were mounted the other has a couple scratches, but both were only used for a couple months lightly. Never protect or ran less than 1 ohm. 4. Price: : 350 obo Offer up guys I need these gone for the next build OR I will trade + cash for a 3000d if you all got one 5. Pictures: Oh Yeah The one with scratches got scratched while I was carrying it in from the car :censored: they are boxed up and ready for whoeve…

Ok, I'm going to try to make this as easy to understand haha. It's for a 100.2 btw. I went to mock up my amps in my trunk, and in order to retain access to my spare tire, I'm mounting my amps in a certain way. In order to mount it the way I want, I think I need to unbolt the exterior casing, and turn it 180*. Basically my OCD is kicking in, and I want the "sundown" facing in the direction my other amp is facing. I know I can probably unbolt the strip that says sundown, but can I actually rotate the casing like I said? Basically, the 100.2 sticker lies over the power, but can I turn the casing so the sticker lies over the rca inputs? If not, maybe Jacob could hook me up wi…

I have the flu -- I was totally out of work yesterday and I'll only be in for a short time today. So if you wondering about lack of e-mails and so forth that is why.

As many people know Argent Audio is now in Morgan Hill so it is only natural to have someone in Gilroy, Ca!!! Cellular Universe And Cartunes 190 Welburn Avenue Gilroy, CA 95020 (408) 846-6440 They are great over here! They are the only shop in my area I trust with my personal cars so far! Andrew

I'm about to purchase a 1500d from a guy that is local to me. I was just wondering what it takes to run this thing at .5 ohm. My electrical will be: Stock 140a alternator, Big 3 done Powermaster D3100 battery for the front Powermaster D680 for the back Is there any reason that i wouldnt be able to run the 1500 at .5 ohm daily?

These are actually of a proto that was shipped in December to Mike (theothermike). He was nice enough to share with us!

Hello every budy here @ the sundown forum. i'm Cornelis from Holland and have a saz 3000 in my streetmax 1/2 spl car. whe tested the amp in a couple of cars now. whit good test results. whe tested a bmw coupe E36.from 1994 .whit 2x 12 inch @ 0.5 ohm hitting 146.8 dbs @ 46 hz. and whe tested in a vw caddy from 1996 whit 5x 15 inch @ 0.5 ohm hitting 151.7 dbs @ 38 hz and in my panda streetmax 1/2 whit 1 northstar 90 nsb and 2x 18 inch @ 0.25 ohm @ 67hz whe did a 158.1 whit voltage drop 11.22 volt

Well I am in love with my audio setup which consists of a 1500, 100.2, fi 18" Q, and CDT special editions up front. I have only burped her a few times around 3/4 volume and have never had any issues. Today I was playing the system about 2/3 and noticed that I started having voltage drop pretty bad but before I never had any electrical issues, my guess here is that the battery is struggling now with the demand (brand new red top). I have all 0 gauge wiring up to a dist. block with 2 foot runs of 4 gauge. I do not have the big 3 done yet and is on my to do list which brings me to my question: What else can I do besides the big three that isnt over the top for this setup? I …

hey whats up i have 4 dual 4 ohm subs and want to run 1 amp many people have recomended me that the saz2000d will b .5 ohm stable and i will have to run it at that, will that amp handle that, i heard it will put out like 2300 watts at .5 and b stable thanks

People here in SC have never heard of Sundown Audio and after seeing my scores they ask about them at every show. The basic questions are where can I buy them and what all kind of products do they have. I try to explain as much as I can but it gets really time consuming doing that over and over. Its also tough without any visual references and specific information on hand. Do you have any type of brochure or product cards that I could hand out to people? We really need a dealer here in SC. That way I could direct people there. Right now all I know to do is send them to the website.

I have 4 Dual 2 subs and i want to hopefully run 2 3000's so each amp will see a 2ohm load. with them strapped will that make the amps run full power

I have a 2003 toyota tundra and I want 2 upgrade from (1) 18" btl and an orion 2500d - to - (2) saz-3000d's and (2) 18" btls. But toyota has a patent on the wire harness to the alternator! So I don't know if I can recharge a good sized power bank efficiently with the 130 amp stock alt.. Unless I get a solar panel on my roof! Will a red top optima batt. with 2 powermaster 3100 batt. be enough power for (2) 3000d's? I know i'll end up running through some alternators every year. I just want a daily driver but I still want full power potientail? Does any body know anything about upgrading toyota electrical systems?

SA-8s SOLD OUT (4-21-11) The large quantity we recently received have already blown out of here. I had planned to have the v.2 done some time ago and have them in production and ready to roll in around now but that did not work out as planned. In any event... the unforseen sales volume + delays on the v.2 put this production run at the end of July to come in. Until then Mike Bruno has a decent stash of the QC failed units he is re-building... and WoofersEtc.com has the last of what is in our warehouse on the way to them for new drivers.

i just got me a nice pair of twins! i tested them in my vehicle while at the store, (no RCAs and speakers connected, used my relay) and they 'restarted' like normal.. (which further hints that there was a problem with the 3000D..) anyway, i can't wait to get these connected.. and i just can't stop staring at them..

Nicely done video too

do you guys have a shop in statsville, NC it says my package is comming from their and thats not but a 2 hours away im just curious.

Hi all, I've read here and there not to use the bass boost( because of clipping signal?). But, if it is so bad, why do we have it on the Sundown amps like my saz 1000 D ? How and when to use it? Mine is still set to the minimum, and my 15" Icon seems to love it:)!

my best friend just pick up 2 sundown saz 1500ds and he was wondering if its better to strap these amp or just run each amp to each sub? i tried to tell him it would be better from to just strap them. the sub he will be using is 2 fi bl 18's which he will be getting around xmas time

i have a question, is the $350 fixed already for the SAE 1200D, or are there addtl charges? and for the SAZ 1500D $570?. it will be delivered to anaheim, CA. and will there be any increase in the price? i might buy an amp on march.

For sale SAZ-4500d 950.00 shipped used for less than a month like new condition.

got a couple NSv2 15" d1's, built the box and would like some input on amp selection (Sundown as im a new dealer). We running Street Beat 4 (unlimited alt, bat, amp... across the board). Box is 3ft^3 per sub and tuned to about 55hz, (subs and amp on same plane) bed cut into a single cab silverado. My question is i guess is what can i put to these things (within reason), money not being an option, 2500 per coil?? 4500 on each one??? if we use 45's should we dual alt? goal is 156db, which sould be easily obtainable, imo might get close to 160 with the luck we've had lately (outlaw rules, i can post legal #'s too)

Ok this is so confusing to me i am confusing myself. So plz hear me out. First of all I am using 2 of these sub http://manuals.harman.com/JBL/CAR/Boxes%20...12GTi_rev_f.pdf Together wired in parallel they make a 1.5 ohm load which what i been told on here thats really 2ohms or a 2ohm amp for max power would be best suited. (parallel/parallel) = 1.5 ohm load Voice coils wired in parallel, speakers wired in parallel Right now I have a sundown 1500d which is 800rms at 2 ohms. I want to buy another 1500d and strap it. My confusion is right here since the sundown does 1500rms at 1 ohm and i decided to strap it what will my final ohm load be. I am hoping that if i strap this a…

in the sticky where they did a test this is what was read Power supply voltage was 16.5 volts at rest dropping to around 14.5 volts. So consider this a 14.5 volt output rating. Our clamp meter ran out of steam at 400 amps so we measured efficiency at lower levels: 3294 watts @ 84% efficiency (252 amps draw) 3938 watts @ 81% efficiency (316 amps draw) 4424 watts @ 74% efficiency (392 amps draw) here is my question and i want to get a better understanding of this so bear with me for a minute..lol 3294 watts with 252 amps draw..now lets say your running 2 of the 3k watt models which would be 504 amps draw? and if your alt is only a 300 amp alt how does that work? im sure i h…

I got a new puter and lost Jakes number. Can someone pm it to me?