Sundown Audio

Was wondering if the center plate that says Sundown on my older 3500d will fit on the new 3500 amp? I kinda like the older one better.

"This is our upcoming 1250 RMS line being tested free air with nearly 3x their rated power level -- I took it up a bit too far just as an example =) This was taken with a bit newer camera than previously used -- Canon Powershot Elph 16.1MP. The excursion looks a little weird in this video compared to other videos so not sure which camera I'll keep using in the future -- but hope you all enjoy !" From the video caption.

I am curious if there is any ETA on the 6.5" comps availability? I need 2 sets ASAP

My buddy tossed a golf club in my car and punctured my SA15. I was wondering if they can be reconed and how much i should expect this to cost. Thanks gus

I currently have installed in my 2006 QX56 an saz-1200d and a sa-15 d2 in a ported enclosure 3.45 ft cubed tuned to 35 hz. I have 0 gauge running to the back the big 3 all in 0 gauge. I have an xspower d5100r up front and a d680 on the way for the back, gets here today. My stock bose actually over plays my current set up so probably going to leave it like it is until I have to upgrade as everything ties into the stereo. I found a deal I could not pass up on a saz-1500d v2 and now have to attempt figuring out how to make the right upgrade to make my SUV pound. What would be a way of setting up a system with these 2 amps? I was thinking of several ways, but would …

I know everyone has been anxiously awaiting these models to be available for ordering -- today is the day !!! So pick them up and be one of the first with the new models !!! ---------- http://www.caraudioclassifieds.org/forum/sundown-audio/137342-saz-1200d-prototype.html ** SAZ-1200D Information Thread http://www.caraudioclassifieds.org/forum/sundown-audio/123265-saz-2500d-v-2-prototype-completed.html ** SAZ-2500D v.2 Information Thread http://www.caraudioclassifieds.org/forum/sundown-audio/125227-sundown-saz-3500d-v-2-prototype-complete.html ** SAZ-3500D v.2 Information Thread ---------- Production started last week. Our estimated delivery date to our shop is by the end …

Is it possible to buy just the crossovers? I have 2 sets of rokford fosgate 6.5" component sets (don't judge me they were $50 a piece during back Friday locally). They did not come with crrossovers. I have sundown for everything else in my truck.

Amp for 2 E8v3's d4

We are opening a sale on our "E" and "NeoPro" lines for the month of February starting today -- the prices are as follows : MODEL // REGULAR MAP // SALE PRICE E-8 v.3 -- $95 -- $80 E-10 -- $105 -- $85 E-12 -- $110 -- $90 E-15 -- $130 -- $105 NeoPro-6.5 -- $99 -- $69.99 NeoPro-8 -- $105 -- $74.99 NeoPro-10 -- $129 -- $89.99 Price is for EACH speaker on the E series and NeoPro series. E series are all available in D2 and D4 coils. NeoPro series are all available in single 4 ohm and single 8 ohm coils. Find a local or online dealer to order : Find a Dealer Dealers can call or e-mail us with any questions on the sale -- may take a few days for the word to get around to all of…

We've had some e-mail system glitches at the shop. I've been discussing it on our Facebook page the last few days -- the long of the short is that if you sent a message before February 1st and didn't get a response there is a HIGH likelihood that your message was lost; it is not being ignored but it simply isn't here. Our e-mail volume was too much for consumer e-mail programs and they freaked out a bit... various database problems. In any event our new Zendesk support ticket system for our e-mails is working very smoothly; we fired it up yesterday. If you have an e-mail in that is older than February 1st please re-send it to one of these @sundownaudio.com addresses; bran…

The 257mm spiders showed up this morning so I assembled the 15" version today. I should be able to test it tomorrow at some point. See photos below : *257mm spider tool

I hope this forum is ok for me to post a question here. I am thinking of buying a 10" subwoofer and am looking for SQ. Can anyone suggest a Sundown Audio subwoofer I should buy. I have 2 E- series in a big ported box with 2 12's and and love them with spl, but want to do a SQ setup for a different vehicle. If possible I would like the single sub would be under $200. I also will want it to be sealed. I'm also not wanting to use more then 600 watts. I just want the sound to fill the vehicle. I don't need to be heard blocks away. Thanks for your time.

So to make a long story short I have a polk amp that puts out 573 watts rms. The rated rms level for the e 12 is 400 and my amp can't even push it. I don't know if it is because the sub hasn't broken in yet or if because this sub is simply a Badass. Anyway the point I am trying to make is... Thanks Jacob for making a beast subwoofer. Now just time to get a more Badass amp to push this bad boy.

I have received a sundown sticker with the purchase of my e12 and it is different from any other window sticker I have encountered. Does anyone here have advice on how to apply it to my back window?

So what caught my attention with this sub is the price. I'm not really limited on space but I assume this is just as good as any woofer but a shallower mount. I have two questions about it though. 1. What is the suggested rms ratting for this sub? Is it 500rms like in the name? Or is that like max/peak rms? 2. Also, what would be a very general ported box size for this sub? I'm guessing around 2 cubes tuned to 32hz or something? Thanks!

Both Brandon and I will be out of town from the 5th to the 14th this month (January 2013) for a business trip that involves CES and several other sub-trips while we are on the west coast. Debbie will still be here on the phones and e-mail to process as many orders as possible (paperwork-wise). We will also still have Thomas in here in the build room and also the rest of our shipping and packing crew will still be here. Some advanced or tricky questions / orders may be delayed while we are away but most "standard" work should be handled without much issue. Both Brandon and I will do some e-mailing in the evenings from our hotels; as much as possible. We are both still a bi…

Just got them in and QC tested them all on the bench; very happy so far. Still need to get them fully charged then run preliminary specs (have to send them out to do so as our magnetizer isn't in yet) -- but we are still stiffening up the surrounds so those will only be ~80% accurate initially. This is also the first look at our tooled 18" spider adapter piece ! On to the photos (video of the 18" is uploading) :

I'm running 6 Sa 8 v2s on 2 1500s in a 6th order in my Tahoe. They sound ok on the low end(28-38hz), but they sound like they have so much more to give. I'm debating switching up enclosures, but I wanted to get the opinions of people who have run them. Is it worth it to give the subs more time to break in before I switch boxes? I'm also considering adding another 1500. I've only had the subs for a couple of weeks. I only have a chance to get on them driving to work and around town.

http://www.caraudioc...prototypes.html ** Thread of prototype development As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of January 2013 on these. ---------- Pre-Order Price : $115 Regular Price : $140 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU MUST INCLUDE YOUR NAME AND ADDRESS. If these are both not in…

http://www.caraudioclassifieds.org/forum/sundown-audio/129896-e8-v-3-prototypes-7-26-12-a.html ** Thread of prototype development As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of January 2013 on these. ---------- Pre-Order Price : $75.00 Regular Price : $95.00 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU …

Originally posted by Greg Kashin : http://www.caraudioc...ponent-set.html ---------- Ok, we got our comps in a few weeks ago, and were immidietly super impressed with the build quality and finish on these things - really a great set! So the initial listening impression was from an SQL-type install in a Toyota Landcruiser two sets on a Sundown SAX125.2 with a couple of SA10's sealed in the back for bass testing material was comprised of some random rock, blues and vairous club track that the owner of the car normally listens to as well as an SQ competition CD from the AMT Russian Challenge format the mid-range capabilities of the set inpressed us - well over…

Our prior unit had extensive supplier issues to the point where we've just had to write off all of that work and tooling. In any event... I decided to re-visit the X-8 idea and base it on our SA-8 v.2 frame tooling. The first challenge was to make a GREAT spider for a 2.5" coil on an 8" woofer... which is difficult and we used extensive software optimization before tooling. Fortunately our basket allows a spider about 10mm wider than pretty much all other 8" frames out there. Since the spider is the main challenger we had that tooled first and then built up a test bed to test with : * Former was too tall / big in diameter for the SA-8 dust cap to work so I had to use an …

Just showed up today. Need a bit of tweaking still (they don't have the stiffer surround on them yet, etc) but at least we have the first looks at them and our new terminal blocks too :thumbsup: * Z v.4 12 on the left and X-12 on the right. * Z v.4 12 on the left and X-12 on the right. * New terminal blocks ! * Z style spider -- these will feature one fewer layer than the Z models. Coil is also lighter on these but overall FS should be right at or slightly below the Z counterparts in stock format. * Essentially looks like a "mini-Z" style motor... 190mm magnet vs. 220mm on the Z series / 66mm tall stack vs. 75mm tall stack / thinner steel / less expensive round wir…

Planning to run this setup for nSPL Finals this weekend... needed to stay under 5000 watts on the nSPL clamp meters. On my meter it clamped exactly 4000 watts last night which should be 4700-5000 on their clamps. Tuning is in the high 30s and peaks at 47 Hz... tuned to 30 Hz and also peaking at 47 Hz it was about 1.8 dB quieter but still not bad at all, IMO. I plan to try cutting the ports down a bit more to see if I can get a tad more from it on the meter... may or may not get that done before the Finals event. Best score with just me in the Jeep was 153.8 and with Nick from Stereo Integrity in it as well we got 154.0 dB -- sealed on the dash. * One SAZ-4500D chilling o…

Just unloaded them after lunch; we'll start shipping pre-orders tomorrow. I am really pleased with how they turned out. I wanted to see them before starting more production -- and we sold about 75% of what we got -- so there will be a period of out-of-stock on them; but we should have steady stock starting after the 2nd run !