Sundown Audio

$400 for an SAZ-1500D until August 31st They are IN STOCK and ready to ship. My way of saying "thanks" to my customers over these past three years! This is the lowest price ever seen on the SAZ-1500D. Send me a Paypal to [email protected] with Note "SAZ-1500D SALE" OR Talk to your favorite Sundown dealer !!!

I just wanted to know, if I had a 300 amp alternator and 1 kinetiks 2400 batts with a run of 1/0 would I have enough juice for 1 ohm daily without massive voltage drop?

Im either wanting to pre-order the saz-1500d v.2 in the next day or two for 400$. Or I was looking at the Saz-2000d in the B-stock Refurb section for 400$ and have a little headroom. Power is going to an XCON by the way. Any input is appreciated.

Testing coming later... change a tad from the initial layout. We ended up with 8x IRFP360LC output FETs -- 66% of what the SAZ-3000D / 2500D have. This output section is WAY stronger than the 1500D v.1 what features IRF640 / 9640 units. Power supply features the same number of FETs as the original 1500D but a new more powerful part like the SAZ-2500D has. Power supply transformers and output inductors not changed from the v.1 1500D -- overall size down about 1.6" * Old 1500D on top and new 1500D v.2 on bottom * Internal fuses removed for SPL competition purposes - customers will need an external ANL unit * New driver board * Old driver board

Production started this week. Typical lead-time is 90 days but I will say to be safe expect them at the end of August. I am going to go ahead and open up ordering since I know many of you have waited anxiously for the 2012 models to start rolling out. As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. I do feel pretty solid on this one as the new amp factory is working pretty quickly for us so far on the NS-1 models, though. SAZ-1500D v.3 : Pre-Order Price : $445.00 Regular Price : $525.00 SAX-125.4 : Pre-Order Price : $425.00 Regular Price : $500.00 Pricing is shipped in continental 48 states. Contact…

Got it in today. I will be doing some testing over the next few days -- here is a comparison to the 1500D v.2 model -- the new v.3 is longer to fit all of the new parts and the fan but is narrower. The newer 2500D v.2 and 3500D v.2 will actually shrink in width AND length compared to the old units for reference. * The fan blows through the board to expel air out the sides of the amp. Will do a heck of a job in terms of cooling :thumbsup:

Did a couple of search's and did not find anything close to what I wanted to know. Bassically is the regular anodized aluminum trim plate that sits on top of the map removable without doing anyharm to the amp itself, by removing the 2 SHCS located on either end. Reason why I am asking is I wanted to make a custom plate for mine. Thanks in advance for any help. Toolmaker

Just got done doing a little testing. Setup is: SAZ-1500 at 1 ohm 15" SI Mag Transmission Line tuned to 32hz Kinetik HC600 (I know, I know, it's all I had to slap in there right now) All done in the trunk of my Stratus, legal, on the dash sealed up. 144.8 @ 43hz

Any idea how soon this model will be released? Since my upgrade to three subs I'm in need of more power and would like to stay Sundown. I'm limited however to a pair of amps that have no more than a 750watt power rating @ 4ohm and 200a max rated current draw each. The 2000s should fit perfect. I'm looking to upgrade this summer in about three months or so. Will they be out by that time.

I was wanting to know when the 2000d model amp is coming out. Im piecing my system now and am goin to be buying an amp in about 1 month. Was wanting to get SAZ-2000D amp, but if its now out in time I will get the AQ2200D

Anyone have this new amp up and running yet. How is the power of it?

Does anyone know if they will begin making these again? I would love one for my 2 15" Fi SSD's but I'm only buying the amp new and it's discontinued.

All will be shipped by Friday at the latest. We started shipping some last Friday. So no need to blow up my e-mail and PM box

$485 from April 19th on until they arrive around the end of June (ETA is around the end of June). 500@4ohm 1000@2ohm 2000@1ohm Rated at 12.8 volts ALASKA AND HAWAII ADD $15 Regular MSRP = $899 / MAP = $625 PROTOTYPE PICTURES: * Production models will have the mirrored part number like the 1500D. * SAZ-2000D requires external fuse. Production will have the "new case" with internal fins. * SAZ-2000D in the center You can see test results vs. our other amps here: http://www.soundsolutionsaudio.com/forum/i...showtopic=24776 --- THIS IS FOR USA ONLY. To pre-order internationally contact your local distributor: http://www.sundownaudio.com/dealers.html#international CANADIA…

$425 from TODAY until April 18th, 2009 -- PAYPAL me at [email protected] to place your pre-order. The above is an ultra-special discount for those patient enough to pre-order NOW and wait for the amps until they come in. It is equal to the best sale price we had on 1500Ds! $485 from April 19th on until they arrive around the end of June (ETA is around the end of June). ALASKA AND HAWAII ADD $15 Regular MSRP = $899 / MAP = $625 PROTOTYPE PICTURES: * Production models will have the mirrored part number like the 1500D. * SAZ-2000D requires external fuse. Production will have the "new case" with internal fins. * SAZ-2000D in the center You can see test results vs. …

ONLY VOTE YES IF YOU *WILL* ORDER ONE during the first 30-day segment with the extra discount. Do not vote if you think you might... only if you will. Please POST if you voted YES - all other posts will be deleted. If I started it now and ran the pre-sale for 30 days it would 60-90 days after the "initial" pre-sale for amps to arrive but you would save $60 per amp vs. even the regular pre-sale for waiting the extra time. POLL RUNS UNTIL TUESDAY 3-17-09 -- if enough people are saying they will do it pre-ordering will start then. This puts amp delivery in late June to mid July. --- ORIGINAL POST: Who would be willing to put money down towards getting amps in late June if a …

Does the SAZ-2500D come with a remote bass knob? I cant find any pics...

Again, Posting some high quality pics for anyone who is interested and can't find any on the web. I will update this thread when it is installed in my vehicle, but that may be a week or two. SAZ-2500 Will be pushing four of my VVX-12's. Can't wait!! Amp is a great size as well for the power it packs. PS - Don't mind the watermarks, they are for my web store and what not, don't want them flying around the web

Pre-ordering NOW OPEN... pre-order runs until July 4th or while supplies last. ETA is the end of July -- as always this is subject to delays and is not set in stone! Before opening ordering 20% of this run is already accounted for in large Team builds... so get them early if you want them from the first run. COST : $525 shipped in the continental USA - Regular MAP Pricing is $775 * Contact me for AK and HI orders * USA ONLY SALE TO ORDER PAYPAL ME AT [email protected] with Subject "SAZ-2500D Pre-Order" or talk to your favorite online or local Sundown Audio dealer. ---------- This amp is a beast... it has the output section of the SAZ-3000D and a strong power suppl…

It is here ! Some comparisons to the SAZ-2000D model below. * Sitting Next to SAZ-2000D Model (2500D to the right) * Another angle - you can see the 2500D is only about 1" bigger (2500D on top) * SAZ-2000D Transformer : ~59.5mm * SAZ-2500D Transformer : ~64.5mm -- hard to tell in the photo but this adds a good bit of size overall to the unit * SAZ-2000D Output Inductor : ~47.5mm * SAZ-2500D Output Inductor : ~53.9mm -- significantly larger as the output section is equal to the old 3000D --- I'll be doing power testing as time allows and then some solid abuse testing. Once all of this is complete we can start production and offer a pre-sale.

We should have it in a week or so to test ourselves; factory testing has went very well and it is meeting all of our design goals. Length without feet = 18.89" With the feet total length is roughly on par with the original version (20.15") -- then the case is of course narrower. So overall foot-print is down. Will get some side to side pics when the prototype gets here.

Does anyone have pics of these amps, close-ups of each end and internals in particular.

Two quick questions that are really easy but i can't seem to find. Is the remote that comes with a SAZ-3000d for bass-boost or gain? I think it's for gain but i want to be sure before anything bad happens. Also, i have read what to set the Subsonic filter too, but what about the Low pass? Is it just a "whatever sounds better to you" thing? Or will setting it too high hurt my Sub? thanks!

Hey Jacob, What thread can i re-tap my SAZ-3000 to on the speaker outputs? i guess i stripped the thread completly on one of them and was wondering what the next size thread up i could tap it to? or just let me know the size it is now and i can figure it out. Thanks, Anton Miller

The SAZ-3000Ds are completely out of stock now - no more available for trade-in program or for sale otherwise. If you need another one please contact dB-R as he has some refurbished units for sale.