Sundown Audio

I'm wanting to purchase 2 saz-3000D's and I had a few questions about them... My first question was how do I order some? And the pricing of them? I live in colorado and I have no dealers of Sundown, so I'm pretty sure I would have to buy over the internet

would there be any way to make a completelly wireless amp? something like a Bluetooth setup so people can get away from tearing their vehicles apart to wire their doors and what not. it's easy to power up an amp, but a pain in the ass to wire up the doors and the rest of it. i would love to see an amp that only needs the power and ground and instead of a remote wire or RCA's the amp turns on via Bluetooth signal sent from the headunit and sends signal to the speakers via Bluetooth. could you imagine how great that technology would be? i think it's an awesome idea. i think the amp would have to be on each speaker though and someting like a Bluetooth router would have to be…

I have a Sundown Audio Nightshade v.1 12" sub dual 2ohm coil's. I was wondering what is the process of getting it reconed? How long does it normally take? And how much is it to be done? Thank you very much for your time and great products. Also is there any options to upgrade it any? And how much would those options be. And are they worth it? I have a sundownAudio SAZ1500d for amp. Big three done and tons of zero guage wire also running second battery.

Hey Jacob i shot you an email a couple of days ago i want to get a rocone for a sa-8 copper dual 2 ohm. I also want an 8 in basket. I will paypal you the payment as soon as you send me an invoice. Thank you so much Billy

What is the proper way to adjust the settings on my SUNDown 3000? I'm only adjusting it to be clear to my ears as of now Can someone explain each potentiometer setting? / What each one does? and how to adjust properly. Do I set different if I want "lower" or "higher" notes to come alive? Thanks in advance ~Ronrico

Every SA-12 goes through this test before shipping to the customer. Lots of excursion

What kinda numbers do you think I can achieve with this setup? Car is an 06 Scion xB, currently I have stock battery up front, and a Kinetic 800 in back. Big 3 is done and dynamat everywhere so far but roof. Only cause I ran out of money. Box is 1.44 tuned to 38 hz sub up port to passenger side. Port is a single 4" aeroport. I made box so there is roughly 8 and a half inches to side of truck. 3/4" mdf except top plate top plate is two layers of 3/4. Box has lots of bracing. Just a note this is a version one of the nightshade. And is there anything I can try to gain a little bit more db's. Also, if it helps any head unit is a Pioneer Premier. Any help is greatly…

Ok, I contacted you guys via Facebook to ask some questions about how the Nightshade V1's, and I have yet more questions, but I figured they would be best suited for the forums to inform other people with similar questions. First off.. Do you sell a recone kit for the NSV1's and if so, what's the price? Secondly, I know you said 2.0 Cubed is about right (NOT PORTED) for the NSV1, but I'm sick of seeing the same square/Rectangle boxes, with the same slot-ports. Any ideas on a cool looking (and still functional) box? All would be done with 3/4 MDF, and if so, what programs do you recommend for designing boxes? Thanks SD, you guys have fulfilled my Audiophile needs! I don…

piss poor camera...i know http://www.sundownaudio.com/index.php/products/subwoofers/item/e-series.html?category_id=2 $110 shipped... on a JL 500/1 1.5 after all displacement...tuned to 33 hz very...VERY... impressive sub I have only had about 30 minutes of play time but...holy crap...this thing is a tank. for 110 shipped this thing is a steal. Not sure why i called this a "build" thread as I totally forgot to take any pics of the actual "build"...

wondering if its possible to only use one input when bridgeing a 100.2? i know alot of the oldschool stuff i used to run you only needed one channel (usually the right) when bridgeing. the reason i ask is because im going to run two bridged 100.2s as a stereo pair and would like to avoid any funky Y-splitters or anything like that.

can i run they sundown @0.5 of i keep the gain down? i have a fi bl 18 dual 1 ohm sub and i dont wont to send it back to get it recone.

Can the centre logo trim piece be rotated 180*? Pics to show what I'm talking about. Please excuse my horrible photo-chop

anyone happen to know how much more current a 3500d would draw<1ohm> then 2 1500's strapped <2ohm> thinking about changing out the 1500's for a 3500 to save room but have heard they are power hungry as it stands now i never drop under 12.2 at full tilt not sure if my electrical can handle the 3500 thow fact alt deka under the hood and 2 more in the back big3 2 runs 0 back to other batts

T'm trying to find the right amp for these im stuck between the 125.2 and the 100.4. can i run those passive? ive never set a front stage up so ive been trying to find the differences between passive and active, can anyone explain or give me a link to read on this? i only have a minor understanding but want to learn! i looked on the 12volt but couldnt find anything, maybe i just cant find the right stuff i want? i would prefer the easier setup because of my inexperience, so im thinking passive on a 125.2, would that work and sound good? the porblems i can think of for active is if i got the 100.4 would that give too much to the tweeters, or would i be able to tune it d…

well, i ordered both my amps earlier this week, and sundown has very fast shipping. Hopefully will have everything hooked up in couple weeks, it will be hard to wait, but i will be working 7 days a week for at least 2 weeks. Pics and new cd player came in also today:

dgnHnJ2PuAQ Check it out

Shipped prices are to the continental 48 states. Paypal ONLY unless I authorize another form of payment ahead of time. ---------- 1) Set of very nice passive crossovers. I had these made in 2003 and never used them... designed for a 4 ohm mid and an 8 ohm tweeter along with 0 db and -3dB positions for the tweeter. Originally made for VIFA PL 4.5" and Audax TM025F1 with a crossover point of around 3.5khz or so at 12 dB per octave. Yes, those are 12 gauge copper foil inductors that you see. Inductors alone are valued at: 2x 0.5 mH 12 awg @ $56.60 2x 0.68 mH 12 awg @ $66.30 These also have Solen Poly Capacitors... very high quality crossover designed with LEAP at Madisound. …

Lots of other projects took priority over more NS v.2 motors but they came back to the top this week -- so the new ETA for more motors is end of May. Of course I'd rather product not be out of stock this long but we invested alot in amps to get around the MOSFET shortage so the NS v.2 had to take a back seat for bit.

Just came in about an hour ago ! So they are now in full stock in 6.5 , 8 , and 10" models in 8 ohm and 4 ohm. * Included Speaker Caulk

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...OX:NEWLIST#LIST I requested that this seller list 100 pieces for me as I buy stuff from them all the time... they put 10 lots up for sale So grab em' while you can. I've used about 20 of em' so far in my truck build

Will 2 15" SA 15s have enough room as of specs in a ported box that is approximately 36" long, 18" deep and 24" tall? Just wondering because I would like to put two 15s in the cab of my 98 s10 extended cab.

I'm going to be replacing my HiFonics BXi1606 with one of these amps...I currently have 0/1 guage running from the battery to a fused distro block that has (4) 4ga outputs...the length of the wire running from the fused distro block to the amp is about 12 inches...would it be okay to run 12 inches of 4ga to the power input of this amp?

I am getting ready to buy the sundown 100.4 amp and I have never done this before, but really want to try it. I am going to run the tweets of two channels and the mids off the other two channels. How do I set up the crossovers to do this? I know this may be a dumb question but I have always had external crossover's and want to run this way. Please help.

I'm running 10g wire for the POS connections and had a hunk of 4g laying around, so I used that to connect the NEG terminals. Any problem with running bigger wire for the NEG connections?

Hello everyone Has anyone use their E8s as midbass yet? If you have, how do they perform and how do you have it set up? thanks..... Brian