Sundown Audio

So I am in need if the address to send my nightshade in for a recone. Thanks

Hey guys, Hoping some one can provide me with the sa-15 cutout diameter and the outside diameter? seeing as the sa-15s that i am buildong a box for wont be here till MONDAY ..... anyone have this info? Jacob, anyone? woofers ect has failed me on this one

Amp for 2 E8v3's d4

So UPS came today, but I was at school and of coarse my mom didn't answer the door to sign for it but my friend got it straigtened out and got it redelivered. I have to say that it is extremely heavy lol. The good news is I am very satisfied with it, it hits the lows as well as my 15" BL did. I didn't get a sundown sticker though...bummer. lol thanks to Kevin, pleasure doing bussiness with you. Jordan

Has anyone tried the Sa-12 's in a 4 order bandpass ? What kind of number? I'm thinking of trying 3 in a 4 order. Can anyone design this type of setup?

I was wonder have any testing been done on the SAX 100.2 and SAX 100.4. I about to become a dealer and I'm really in to great multi channel amps and I'm building a SQ comp car now and using DLS ultimate amps. I would just like to now want the real world output of these amps are, seeing how much headroom is built into the sub amps. Thanks for all the help in advance.

have a set of dual 2ohm subs. that i will later switch out to a single set up. my question is how safe could run a saz1500 at .5 ohms on them until i switch over ? or should i just wire them to 2ohms and put up with less power. to be safe.

Went to Diablo's house today, to check on the woofers he had come in since he can't........ muwhahahahah

well, i got on here for bout the last year, and decided i wanted to get back into some stereo's. Anyway last week i ordered a 12" BL with options, and decided to go ahead and get my amps too. So, I just ordered a saz-1500D and a SAX-100.4. I am anxious to get all hooked up, I have always bought stuff locally or a few things from woofersetc.com. So, pretty excited to try something besides kicker, alpine, mtx, crossfire, jl, or rockford. Thats bout all there is here. Will post pics when i get them. Thanks sundown, again

http://www.sundownaudio.com/NS_Presale/ Follow the above link to place your pre-order. This pre-sale will be open until JANUARY 31st of 2008. Subs are expected in February of 2008, but delays may occur. For your patience you will get this great introductory pricing! 12" Nightshade D1 or D2 -- $350 each 15" Nightshade D1 or D2 -- $390 each MSRP on the 12" model is $549 MSRP on the 15" model is $599 So, rest assured, prices this low will not be seen again! These prices are shipped in the continental 48 states, contact me for shipping elsewhere. More information and photos available here: http://www.soundsolutionsaudio.com/forum/i...showtopic=12907 SPL Testing thanks to Chad…

ok running 4 1500's strapped @ .5 ohm each set or 2 3000's strapped @ 1ohm. what do you think? i'm leaning towards the 1500's!

SAE-1200 FTW!!!!

Just wanted to know if you could give me some history on your compony, and where your products are made and built? Thanks

Hey, been trying to email you, dunno if you got me on spam filter or something else wierd going on ([email protected]) You should have go that box from me last week with the shocker coil, spider, and some maple syrup. Please get back to me ASAP with a price of at least the other recone parts we discussed and a 15" basket with appropriate shipping so I can get these things built up for this weekend 3X NESPL show!

I still have mine, and alls good at the moment. Thinking about getting another amp. Curious about them because I didn't see them on your new site. (since the last time I've seen it)

put the MTs in today on one 3000d @ .5, i wanna get it metered, but its pretty loud with just one amp...when i get both in there its gonna be nasty.

What is the fusing of the SAZ-1000D? What is the power inputs? I have seen 3 different specs on three different sites!!! I just want the truth!!!!!

http://motormusicmag.com/news/397/53/The-Vinny---MECA-3X-Soundfest.html

Hey guys i am going to make a template for my sub box so i can pre drill some holes on the mounting board of my box so that way i can just toss the sub in and then use the t-nuts and screw it in. I want to pre-drill due to the style of my box and it will be very tricky to drill with the sub being there. please take note of how the subs will mount and they will be mounted inverted. at any rate i am going to make a cutout out of some steel that way i can position everything before i get the subs back from re-cone and just drop them in and away i go. Now (finally) my question is what radius is the screw holes on? if the cutout is 11inch and the overall is 12.5 will the…

Our phone system is DOWN today completely while AT&T moves our number to the new facility. We've been forwarding it via the internet back to our Talkswitch box in Troutman up until now; but we are getting the whole deal officially moved today. If you must contact us please e-mail [email protected] and he can ask anyone else any questions you may have as well. I will post ASAP once the phone system move is completed. Our old number will STILL work via forwarding @ the phone company and we will also have a new "official" phone number.

Well I had all of my equipment just sitting at my house so I asked my buddy Cooper if I could put it in his explorer for our competition on saturday since it won't fit in my Grand AM. The whole system was put in starting at 11:00 PM friday, and this is what we got. Three Memphis Mojo 15's Three Sundown SAZ 1500D's Box 12ft^3 @ ~ 31hz With no testing we did a 149.8 TL and took 3rd place Here are some vids Mojo Flex Mojo Excursion In the second vid. the mojo in the middle broke off some of its screws right in the begining of the vid, so no it is not box flex

Hi all, I've just installed my new amp : a saz 1500. I had the saz1000 on my 15" xcon. I did it this past week end, so I could not buy what I needed. I used the distribution block I already had. I have a 0 ga wire coming from the under hood battery to the trunk, and coming trough a dist block with 3 "out" : 1 for the sax50.4 amp with a 60amp fuse and the 2 others are now used for the saz1500 with a 80 amp fuse for each wire. So, I have 2 4ga wires that goes into the bass amp instead of one 0ga from the dist block to the amp. Is it safe ? I did not change the ground wire from 4 ga to 0ga, but I will do it today because it might not be safe at all now! Is it worth changi…

For those that received their SD-1 v.2s already I am really anxious to hear your thoughts. I spent alot of time of this driver and I would love to hear what you think about them!

I've been havin to measure a few amp's outputs recently to measure wattage output and actual resistance at a given note for competition. All the amp's i've ever tested, i always have the user keep it at the same volume level for several seconds so i can get an average voltage and amperage reading sinec these numbers always fluctuate due to resistance changing and voltage dropping... Well, i had the opportunity to measure a sundown SAZ-3000D over the weekend.. and i've NEVER seen an amp remain constant throughout the whole test! This guy's setup was given rise to 4.06 ohms and metering 1273w! That's pretty damn good considering it's only rated for 800w @4ohm. Anyways, i w…

Install is thursday morning..and im just checking....I have 2 18" Btls fully loaded Dual 2's and 2 Saz 3500d's, amps are gonna be strapped...this is the best configuration? Thanks, Freddy