Sundown Audio

What are the difference and what makes them similar? I have heard that these two amps are of the same zenon board. I am thinking about buying an atomic amp from someone for cheap but i am not sure yet because I do not know much about atomic amps. Also, this amp is going to be used on two 10" Audioque sdc2.5 subs. I am not interested in competitions but maybe 1 or 2 here or there just for fun. I am mostly wanting an amp to power the two subs with clean power for a good sound. thank you in advance for the replies.

I am going to be purchasing a 3500 in the next week 2 at the most. I was just wondering what would be a better match 4 sa12's or 2 nightshade 12's both boxes will be ported. reason I am asking this will be my first time using sundown equipment so I was just seeking a little advise. I have a 275a alt., 2 svr1500 batt., so I think I will be fine powering it .

Currently running a 3500 at 1ohm. Haven't clamp metered it yet but what sort of voltage should i be seeing across the speaker terminals. Reason i ask is sub sound awesome at 71-72v but one notch more on the vol sends it up to 75v and I loose output and the sub makes a fart noise. Cheers your brother from across the water.

I have a question. I have been reading that Sundown has two positive terminals hooked up parallel and two negative terminals that are hooked up in parallel. Which has lead me to be confused. (2) JL W7 13.5 (1500Wrms) DVC 1.5 ohm If I wire the woofers as so: And hook just one lead (+) to one (+) terminal on the amp and hook one lead (-) to one (-) terminal on the amp I should come out with 1.5 ohms and approximately 2625Wrms right? (and of course more power since they are underated) And secondly can I just hook it up to one lead and come out with the full power range?

Sup guys, unfortunately I have to part with my 2nd 3000D....I do not wanna do this, but when your out of a job...stuff's gotta go.... I'm Team Sundown and its open to Team Members that want one.. PM me for a price if your Team SD, and we can get the ball rolling..I'm in a big bind...Credit card bills and internet bills are coming...I know someone wants a 3K...and I know Jacob doesn't quite have them yet.. I appreciate it Jacob for letting me sell it, but I'll be buying another one soon as I can afford it again. Here is a pic of one of them...both have the same graphic.. and due to a retarded....long long long long long story for another day...I don't have original pack…

I'm ready to play with the big boyz so i'm looking to get a second SD 3kd. So if anyone has one they will let go for 500 shipped let me know. I also need a Term lab. I'll do 450 shipped on that. Someone help me out. Got money now!!!!

I tried to post this under the SSA shop section, but this should do it here as well. First, I am planning to order a Sundown 100.4 tomorrow or tuesday, from SSA depending on how fast my winning bidders pay up on ebay. What I need to know is, Can a set of JL audio XR653 and a set of JL audio XR650csi ( the 3-way set and the 2-way set) be okay on this amp. JL says the RMS on these sets is around 75 watts , and I hear the sundowns are underrated. Will I benefit from this amp, will it need to be ran at a minimal power to preserve these speaker sets? I have a 2007 FJ cruiser, the 3ways are installed already - in the front doors and dash, and the two set is on its way he…

Is there anyway to achieve bandpass filtering???? For example if I am running a pair of MLI65's and I want to restrict them to frequencies between 70Hz-2.5kHz, is that possible with this amp or any other 4-channel? Thanks

I finally got the amp installed and I have to say I am VERY happy with it. It is clean and crisp. I am rinning 4 infinity kappa 6.5 2 way speakers. I got the shipping conformaton on my saz100d so it will go in next week. I just wanted to drop a line and to say this thing rocks. Anyone wanting to step up their system but dont want to go real big this thing is perfect. It was way louder than I expected. Good job Jacob.

Little project I've been working on for a while... first prototype rolled out yesterday. It about 4 1/8" deep -- power handling and other specs will be announced once we finalize the coil (several variations will be tested). Every part was custom tooled; frame, diaphragm, dust cap, spider, surround, etc, etc. It also features an aluminum pole cap to lower distortion even further. Stay tuned for more information as it becomes available =)

Friends. I have ordered a FI Q12 (Dual 2 OHMS) single sub that will go into a ported sub-woofer enclosure just as soon as I can get in contact with pound that sound. First, I am trying to find out what's the difference between the following two amps, if there is any. a. Sundown Audio SAZ-1000D = RMS 600 x 1 watts @ 2 ohms b. Sundown Audio SAE-1200D = RMS 600 x 1 watts @ 2 ohms Secondly, will either of these two be sufficient enough to power that particular sub since both are 2ohms x 1 600 RMS--------------------(underrated) ? a.

Jacob, I was wondering if you/Sundown ever considered making endcaps to go on the ends of their amps to cover all the wiring, knobs, inputs, etc... Also a space or cap two go between two amps to make it look like one continous amp would be sweet... So you would have Endcap|Amp|Endacp or Endcap|Amp|Spacercap|Amp|Endcap They look sweet the way they are, but I think this would really clean them up.... Thoughts?

Hi, i hope you unterstand what i mean with fm radio disturbtion.. I have a ssd 10 dual 2 in 1.4 cuft ported to 36hz and it needs more power than it has right at the moment. So i was thinking to buy a saz 1000d or the sale sae 1200d. I know shipping to germany will be expensive but i want to try sundown amps :-) But i wounder if these amps disturb the receiving of the fm signal, because i had a t20001 in my car an didnt virtually receive any station anymore... Can you help my a bit with my decision??

Hey everybody, I just purchased a USED SAZ 1k on here. And once i installed it i realized that the blue l.e.d on the amp was not on. I checked the voltage and it was reading over 14v. Checked the grounds, power and it was all fine. I even swapped out the amp with TWO other amps and the others worked fine. (nothing was changed). The amps used were a Sundown 100.2, and Alpine MRP M1000. Now after trying one more time i was messing with the remote wire and saw that the PROTECTION l.e.d would light up from time to time. So i am guessing that the power l.e.d. is just out which is no big deal, I cannot confirm this because I dont have a working woofer sitting around i …

Was just thinking about where the future of Sundown Audio was heading. It seems to me the company is growing and becoming more and more popular. (correct if I'm wrong) At some point in time I am assuming there will be a need for a new larger warehouse or building, and plans on incorporating standard Bench Tests for all amplifiers? Of course I, as most of the people on the forum know what the ability is of Sundown amps, getting bench results with the amp is always a nice little extra.

Made you look, didn't I? New video of the carnage my car has become since I joined up with Team Sundown:

Hey everyone before i pull the trigger on two 100.4D and a 2000D can any one tell me their weight? Also if I'm not mistaken is the description for the 2000D @2 ohm 1000 or 100watts? Thank you J

well, i got on here for bout the last year, and decided i wanted to get back into some stereo's. Anyway last week i ordered a 12" BL with options, and decided to go ahead and get my amps too. So, I just ordered a saz-1500D and a SAX-100.4. I am anxious to get all hooked up, I have always bought stuff locally or a few things from woofersetc.com. So, pretty excited to try something besides kicker, alpine, mtx, crossfire, jl, or rockford. Thats bout all there is here. Will post pics when i get them. Thanks sundown, again

How is the SQ of the sundown amps. I see that the power there but how does it stack up against other amps SQ wise? Where can I find third party reviews?

I was wanting to try the sundown amps, I'm currently using JL slash v2 amps and wanted to switch to something new, i know so many use these amps for SPL, but I'm redoing my install for USAC and MECA. 3 way up front and 1 12" in the back.

How many people run Sundown Amps on Fi subs, has there been any testing of the 1500d on the Fi subs?

Somewhere I saw a post or an article, I think by Jacob, that was telling about Sundown amps having issues with certian RCAs and working better with some... Can someone direct me to this article or info??? I did try the "Search" button, but got no love....

Just a sneak peak of whats going on the next few days Just thought I'd share. Was too lazy to take them out to lay it out, but you get the idea. The 100.2 fits on top of that, without the box. 1500 and 100.4 laid out in front of the box, gonna hole saw thru the trunk liner floor to run wires Just put the Treo in this morning, hasn't seen any power yet [it has the same box specs are idq , save box making $$!] stay tuned for updates, going to vegas the next 3 days though. this is what the box actually looks like the 100.2 wil lbe sitting on the left higher side

I would like to know where the amps are made, China or American? Thanks

I've seen a lot on the net about how the smd dd1 can damage sundown amps... Why? How? An why is this only sundown amps. Is it all user error or what?