Sundown Audio

In response to the current economic situation we are lowering our MAP pricing. Cost for our amps from an authorized dealer outside of a pre-order or special sale have changed as follows : SAZ-1000D : $355 OLD / $315 NEW SAZ-1500D : $570 OLD / $500 NEW SAZ-2000D : $670 OLD / $615 NEW SAX-125.2 : $255 OLD / $240 NEW SAX-100.4 : $395 OLD / $365 NEW The prices listed under "NEW" are now available at any authorized Sundown dealer. I sent out a dealer news-letter this morning, so if your dealer has any questions have them call me.

To celebrate our best sales month in company history in February we are holding a March sale ! To place an order either shop with your favorite online dealer, visit your local Sundown retailer, or simply Paypal me at [email protected] SALE ON UNTIL MARCH 26th ! The sale is as follows : SAX-125.2 Regular - $240 Sale - $200 SAE-1200D Regular - $315 Sale - $275 SAZ-1500D Regular - $500 Sale - $425 SAZ-1000Ds are also still on sale from the prior sale... but they will not be back in stock until the week of March 15th. You can go ahead and start ordering if you like : SAZ-1000D Regular - $315 Sale - $275

We are opening up a May sale for you guys -- enjoy ! IN STOCK ON SALE ITEM : SAX-100.4 -- Regular = $365 / SALE PRICE = $320 * Shipped in Continental 48 states EARLY ORDER ON SALE ITEMS : Both the SAZ-1000D and SAZ-3500D are expected in stock around the end of May to early June. SAZ-1000D -- Regular $315 / SALE PRICE = $275 * Shipped in Continental 48 states SAZ-3500D -- Regular $1075 / SALE PRICE = $865 * Shipped in Continental 48 states ---------- This sale lasts until May 31st or while supplies last ! To order contact your favorite Sundown Dealer or Paypal me at [email protected] with a description of your order.

Two of my sample motors arrived -- now I am going to work on the coils and then try them out : It will be for from 8s through 18s. ----- Started a new thread as the original was from a few months ago and the title doesn't really say what it's about Project I'm Working On - Car Audio Classifieds

Current clamp shown @ 19.4 amps 19.4 amps x 120 volts = 2328 actual watts Sub is still okay - don't worry! I just unhooked it at the end.

More power this time... current clamp shows ONE coil. We hooked each coil up to a seperate 120v circuit for a total power of ~8800 watts at the start, dropped to the 7000s then stayed around that point until failure at 30 seconds. Prior to this video we had JUST finished plugging it in to one socket in series for around 2000 watts for FIVE MINUTES - so it was already hot! The Monster lives up to it's name. If you are wondering about the frame... Brandon had two in his wall without motor supports and it broke off some of the screws allowing the bottom to swing out and break off the top of the frame. So... motor supports are a must.

These are due in about 4-5 weeks from today. Neo-Pro 8 - 100 watts RMS / 8 ohms * Neo-Pro 10 - 200 watts RMS / 8 ohms * * Assuming proper crossover frequency for your application; typically 80 Hz or so but perhaps higher or lower depending on the power and size of door. Frequency response is good to ~5000 Hz on these -- they are a high Qts design for IB door installations in a car audio environment. To order send a Paypal to me at [email protected] Pre-Order as follows : Eastern USA : States not listed under western USA. Neo-Pro 8 - $80 shipped EACH Neo-Pro 10 - $95 shipped EACH Western USA : ND, SD, NE, KS, OK, TX, NM, CO, WY, MT, ID, UT, AZ, NV, OR, WA, CA Neo-…

Been working on these for a while but haven't said much... but Andy @ Vex has posted some videos so figured I'll open it up now -- some photos : I have requested spring loaded terminals for production since I hate spades... also will have our logo on them. They are all single 8-ohm so more can be wired to one amp -- the 200.4 can power 32 of them Flat, tied down tinsel leads as I could still hear lead-slap on mid-bass heavy material on our first sample... good quality paper cone... vented neo motor for high power handling. What is different ? Well... we made a real CAR speaker here. They will have great mid-bass in IB or sealed -- this sacrificed some of the sensit…

Hey guys, This is a project I've been working on for a while... it's origins date back to 2009 with my unfinished 4" coil Neo design (some may remember it) : http://www.caraudioclassifieds.org/forum/sundown-audio/19945-proto-neo-4-motor.html I put the whole thing on hold to concentrate more on things that would really grow the company & our dealer base. That being said... fast forward 5 years now and I have the opportunity and ability to work on this again. As far back as 2009 I knew I wanted to go after my Neo SPL design with a 4" coil -- so I did that again. This time I went for a good bit more Neo and a different / unique design : So this is my first prototy…

These should ship out from our Factory on February 15th -- so we should have them around March 15th. They will be available in 4 ohm and 8 ohm configurations. Original discussion was here : -- PLEASE read this before asking any questions in case it's been answered. I will put up mounting data shortly. *Updated* I sent my last set home with Sean so I had him measure them real quick. Depth : 3" Cut-Out : 5 11/16" These are designed as car audio midrange AND midbass drivers -- they sound a bit different from most of the "PA" style drivers on the market as they were designed to produce mid-bass in a car door. REGULAR PRICE - $99 EACH Pre-Order Price - $85 each for 1-3 pcs P…

I got some photos of the prototypes in from my factory -- they are looking good. Of course the terminals will be bent down and whatnot in production. The motor is equal to the NeoPro-8 model. The only negative is that I am not sure how pricing will go on these Neo drivers -- Neo prices are going crazy and it may result in the NeoPro drivers rising in price. For reference... I got Neo quotes for my big Neo SPL motor and it was 300% higher than in 2009 -- no joke! BUT I will try to keep making them if possible as people really do enjoy them :thumbsup: We'll probably do some testing in Derrick's ride to see how they do.

100-watts RMS 8s / $99 each from authorized dealer 200-watts RMS 10s / $115 each from authorized dealer Frequency range is ~80-5000 Hz on these -- the bottom end crossover point depends largely on how much power is ran to them. 8 ohm coils for large setups where you would be connecting 4 per channel to an SAX-125.2 or SAX-100.4 or 8 per channel on an SAX-200.4 These drivers are extremely light and relatively shallow so will fit in many locations easily and also will not weigh down doors with large quantities of drivers as bad as ferrite drivers. Standard Madisound grilles should fit them -- we will test it shortly.

http://www.caraudioclassifieds.org/forum/sundown-audio/166968-sundown-new-platform-spl-parts-production-started.html Originally posted back in March on CACO when I started testing. A better name for the new surround is "Standard Roll" as it certainly isn't just for SPL -- we'll likely start calling it that instead to avoid confusion Either way -- they are now fully in stock and can be ordered on new X, Z v.4, NS v.3, and TEAM drivers and also on re-cones for any of these drivers (TEAM already uses it's own spider; so those aren't compatible with the TEAM). -------------------- Hey guys, Some of you may remember -- or you may not remember -- that I have been plannin…

So UPS came today, but I was at school and of coarse my mom didn't answer the door to sign for it but my friend got it straigtened out and got it redelivered. I have to say that it is extremely heavy lol. The good news is I am very satisfied with it, it hits the lows as well as my 15" BL did. I didn't get a sundown sticker though...bummer. lol thanks to Kevin, pleasure doing bussiness with you. Jordan

http://www.sundownaudio.com/NS_Presale/ Follow the above link to place your pre-order. This pre-sale will be open until JANUARY 31st of 2008. Subs are expected in February of 2008, but delays may occur. For your patience you will get this great introductory pricing! 12" Nightshade D1 or D2 -- $350 each 15" Nightshade D1 or D2 -- $390 each MSRP on the 12" model is $549 MSRP on the 15" model is $599 So, rest assured, prices this low will not be seen again! These prices are shipped in the continental 48 states, contact me for shipping elsewhere. More information and photos available here: http://www.soundsolutionsaudio.com/forum/i...showtopic=12907 SPL Testing thanks to Chad…

does anybody have any information about these subs and pictures of it?

The new NS-1 production run started last month and is due mid to late April coming up : NS-1 -- Website page with details. 6500 watts rated @ 1 ohm Regular cost is $1900 PRE-ORDER COST IS $1500.00 shipped in the continental USA only. AK and HI get quotes from us or your favorite dealer. During the pre-order you can order from us via Paypal to [email protected] or call 704-528-9700 Ext : 3 and order with Debbie over the phone. You can also order from any local or online dealer. International contact your local distributor or online dealer.

I have been holding out opening this to make sure they won't take as long to make this time. The good news is they didn't as our special rectifiers are now in stock at our factory and production finishes next week. So this puts delivery time about 4-5 weeks from now. As of now I still have quite a few to go around but that could change at any time as I have had inquiries about some LARGE builds with these amps. $1500 pre-order price shipped in continental USA AK or HI add $100 for SH ($1600 total) USA ONLY. For international talk to your distributor. You can PAYPAL me at [email protected] or talk to you favorite local or online dealer to pre-order. These WILL NOT …

These amps are due mid to late September. This is our ETA (Estimated Time of Arrival) -- as in it's our best estimate based on the information we have right now. It is subject to customers and transit delays -- so please, DO NOT pre-order if you cannot accept possible delays. To pre-order visit your favorite authorized dealer locally or online OR for the purpose of the pre-order send us payment via Paypal to [email protected] -- include a FULL description of what you are ordering and be sure you have a CONFIRMED shipping address. You can also call in and pre-order with a credit card with Debbie at 704-528-9700 Ext : 5 ---------- PRICING : MODEL // Regular Price /…

Sundown October Sale : SA-10/12/15 and SAX-1200D SA-10 : $185 Regular / $150 Sale SA-12 : $195 Regular / $155 Sale SA-15 : $235 Regular / $190 Sale SAX-1200D : $395 Regular / $325 Sale Contact your favorite dealer to order -- you can search our list of local dealers here : Dealers Or you can order online from an authorized internet retailer -- list is at the bottom of the dealers page. It may be a few days before online dealers update their listings -- local dealers can call or e-mail us for details on the sale.

sundown audio is now on myspace its still under construction but its there check it out and add as friends sundown myspace

check out my vid i made, seen assman do it and had to give it a try, video was taken at diamond head in oahu. oh yeah 2 sundown 3ks

Built a box for a guy, he put a little sub in it on a Sundown SAX 100.2 bridged at 4 ohms and took a couple videos for me. I figured I'd share them. I've said it before, the 100.2, while being the smallest current offering, is my favorite amp. A single DD 1008 on a 100.2 bridged at 4 ohms. Tuned low, especially for an 8, but still managed to do a 132.9 on music out of a trunk, and the back seats don't fold down.

To order any of the below items please PAYPAL us at [email protected] along with an order list (be specific) -- be SURE to have your address on the payment! You can also order from your favorite local or online dealer -- all dealers have the option to provide these sale and pre-order prices as well. This sale is for the USA ONLY!!! Prices below are shipped in the continental 48 states -- contact us for shipping quotes to AK and HI. The below pre-order items are due in December... could be anywhere from early to late December. This is the ETA -- as with all pre-sales the possibility exists for delays and there will not be ANY refunds. So please do not pre-order un…