Sundown Audio

Is it still 2 years? Is it transferable? Is this a question for Sundown's customer service dept.? : P

my friend has 3 single voice coil 4ohm pioneers and he asked me what would be a good amp and i recomended a sun down SAZ-1000 but it would be ran @ 1.33 ohms on around 12.9 volts. each sub is 400 watts RMS so thhats 1200 watts RMS. i was wondering if anybody could tell me about how many watts the sundown would put out under these sercumstances. i dont how much extra power the pioneers could handle so i would like the RMS a lil bit lower then 1200 just to be safe. they r also a few years old.

http://www.caraudioc...prototypes.html ** Thread of prototype development As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of January 2013 on these. ---------- Pre-Order Price : $115 Regular Price : $140 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU MUST INCLUDE YOUR NAME AND ADDRESS. If these are both not in…

Opinions Please How do you think the Sundown Audio SAZ-1500D would compare to the US Amps MD-2D?

Okay so I'm going with the Z12's v.2 and I'll be powering them with an SAZ-3500D, I have a design for a slot ported box similar to the one I have now for my SA-12's. My question is, the box for my SA-12's is tuned to around 30Hz, what should I tune the box for my Z12's to? Although I want to compete with the Z12's I may keep them in my car from time to time just as a daily driver.

ok guys im not sure if this is the right spot, but i am using a sundown saz 1500d. i have a pioneer premier 5000 spl 12' like scott owens used, and i have a show sunday and i need help on a box the box i have now is 1.7 cubes with 12 sq port at 38 hz and the highest i can get out of it is 141 this is how it looks now>>> http://audioforum.termpro.com/topic/35/1446.html now i need help cuz i want at least a 144 to 145 i have a marine battery on the amp like 800ah or however i am supposed to tell you the size im not sure the new box i am planning is 2.5 cubes 40 sq inches @ 35hz any help will be majorly appreciated by the way i am boogie woogie on termpro

How many watts will I see out of this amp at this load? Looking at running the JL Thin woofer.

Guy I work with has a bxi2608D, hifonics says it does 2600x1 at 1ohm. Probably doesnt do that much, but he is wanting to run 1 12" or 15" sub. Would nightshade or the z-15 be able to handle that? thanks

Hey Guys. It has been a while since I posted on here. I finally have both of my Sundown Nightshade 15's and new enclosure in and we did some vids of the Kia in action. As soon as my buddy gets them downloaded, I will post them on here for you guys. All I can say is that everybody was impressed with how this thing hammers on only 4,000 watts. The flex is just crazy and it has no problem at all playing in the 20 hz range. I hope to have them posted by tomorrow sometime.

I decided to go with 2 sets of CDT components. If i decide to run them active, can i run all 4 tweeters off channels 1 and 2, then run all 4 mids off channels 3 and 4? This should be 2 ohms all channels? thanks

I was at a show this weekend and was gonna meet up with a friend up there. When I got there, my friend and his friend were working in the trunk of his car on his amps. I asked what was wrong and he said that his amps were clipping, so he was unstrapping them. Then he said that the Sundown amps perform better unstrapped. He had them strapped at one ohm, and unstrapped at .5 each and said they do better unstrapped...I'm not too sure on his electrical by the way. So my question is, is what I was told true? Thanks.

Hi guys need your help here, would you recommend the SAZ 1000D or SAX 1200D to drive 1 Fi Q 12 Dual 2 ohms (1000 watts RMS) in a ported enclosure? I been doing some reading which indicated that, it's been recommended that the amp should be higher than woofer's RMS so I decided to ask the experts. Thanks, Shopvac.

right now i am pressed for cash and i cannot buy what i want. is there a possibiblity that there will be more sales going on sundown amps such as the 3500 before xmas?

I have gotten my nightshade from fedex yesterday. Had it reconed from a twelve. I would like to say it looks excellent and you can even smell the new sub smell. Haha thank you jacob for your help. Jordan Hughes

The 1500D being $599 and the 1000D being only $399 means the 1000D costs less per watt. So why would someone get the 1500 over the 1000?

like the title says im interested in the SAX 50.2 i believe u working on some protos at one point. just wondering how these are coming along.

Just wondering what the cut out is for the 12" sd-1? I'm not too familiar with making holes for subs so I don't know if there is a pretty much close to standard size or if theres a specific size I need. I was also gonna try to make it with a double baffle to try to have that flush mount look. I would probably need the outside diameter of the speaker also. As I type this I'm in the process of building the box. I'm realizing I'm not that great at cutting wood. Some of the pieces are mm longer or shorter than others. It's too hard to get perfect cuts with no experience in wood working. Honestly I'm not to confident in the box. Should I put maybe silicon or somethin…

Curious as to if there was a push back on time or date.

I'm going to build a ported box for two and need to know if the ported box volume spec (0.6 cuft tuned to 30Hz) is net or gross.

MECA has recently altered its forums. They have added dedicated sections for it manufacturer members. Sundown has really stepped up and became a very active manufacturer in the MECA world. So please fell free to stop by Visit My Website

ok, i read the tutorial on strapping 2 saz-1500ds, and know about the other wiring and to use the br out on master to br in on slave. I am ordering my other 1500d next monday, and was wondering what rca's people use for the br in and out. Its just a single rca, and i have looked around several local places and they have nothing. Could i just buy some cheap rca's and seperate them? Thanks

Z v.3 Line SOLD OUT We have more motors due end of May to first of June. Demand for these has really been incredible... by far our best selling large subwoofer in company history. I have several production runs of motors in place to attempt to keep up with demand so hopefully we don't run out again for some time.

Hi Guys. I am very, very happy to announce that I have been appointed the UK distributor of Sundown Audio. I am currently the distributor for DC Audio subwoofers and Xscorpion wiring, so we are well positioned to make some of the coolest bass wagons in the UK! Spread the word! Dave www.directice.co.uk Direct ICE, + 44 (0) 7703 048 599 [email protected]

Okay, so I finally was able to buy some Sundown product!!! Well I bought an SD2-10 and a Sundown SAX100.4. I read on the forums that the recommended box size was .5 cu ft sealed. Upon installing I had my Dad build the box and he told me that with sealed bigger is better. I believe the dimensions of the box are as follows... Top Width - 18" Bottom Width - 23" Depth - 9.5" Height - 13" Now granted these are external dimensions and we used .75" MDF... I'm just curious is this box too big for the sub? I have the sub wired to a 4ohm load on the rear channels of the 100.4. Any input would be greatly appreciated

This SAZ-1500D was shipped out for testing purposes and then shipped back to Sundown Audio afterwards. It looks pretty much brand new, although it is used so it has some finger prints and whatnot on it. This amp will be covered by full warranty from the date of purcase. $425 shipped in the continental 48 states via paypal