Sundown Audio

Hello, How many watts will my Sundown SAZ 1500D give me @ 1.34 ohms? I have a Duralast Gold battery up front, Batbap 800 in the back. 0 guage wiring in the entire car. I have 3 T3 TS series 10 in a sealed box single 4 ohm wired for 1.34 ohms. Thanks

can i run they sundown @0.5 of i keep the gain down? i have a fi bl 18 dual 1 ohm sub and i dont wont to send it back to get it recone.

I own an Atomic AT 1600.1D and recently purchased a Sundown SAZ 1500D because I am converting once the Sundown 50.4 comes out. I tested it out today in my truck and here's my opinion. Both amps are very very well built. There was noo difference in bass and performance. Both amps never get hot. They both performed surperbly on my 3 10's. The major difference and Chris from DB R told me this was the heatsink design. The Sundown was much heavier. The Sundown is built like a tank I mean that "mother" is one solid amp. The external appearance for both looks about the same the Sundown in my opinon looks a little better. I think the major difference though will be in c…

Well finally I have my Sundown SAZ 3000D hooked up in the Blazer. 1 Fi BTL 15 Dual Mag in a small but perfect box tuned to 35hz 1red yop and 1yellow top Optima batteries Question is How do I test my amp? What are the various ways I might find out the output? Watts? Amperes? Don't I need a special clamp meter? Any suggetions on what kinds and maybe some links. How do I set the gains on my amp correct? I've done it by ear so that nothing is distorting and everything is real clear. But isn't there a better way? Thanks for ANY HELP in advance! ~Joe

What is the proper way to adjust the settings on my SUNDown 3000? I'm only adjusting it to be clear to my ears as of now Can someone explain each potentiometer setting? / What each one does? and how to adjust properly. Do I set different if I want "lower" or "higher" notes to come alive? Thanks in advance ~Ronrico

Can someone please tell me when the last day to preorder the 4500d will be? Thanks, Mike

Does anybody know how to replace the led inside of the bass remote for the sundown saz 1500 v1? Also what kind of light it is so i can buy the correct replacement? Also why would my knob make my bass the same loudness at halfway and all the way up?

When you are gonna put out the pre-order for it, is there any way you could pm me about it, i am very interested, or even pm me a price on a prototype one, im sure i could test it for you, even get you some bench test numbers.

While driving my amp turned off and inspecting it I found that all four fuses on the amp were blown. What all could have possibly caused this?

I apologize for my crappy filming and editing skills, my talents are elsewhere.

Doing final wiring before i get to test out the system. On the manual for a single sub connection, it says to bridge to speaker +, on the speaker -, do i bridge that too? here's what the pic on the manual looks like hope i get the answer soon before the rain comes back thanks

Opinions Please How do you think the Sundown Audio SAZ-1500D would compare to the US Amps MD-2D?

I Dont Really Understand how to bridge a Dual 2 Ohm Speaker, On My Speaker I Have Positive Crosing Over To Positive And Negative Crossing Over To Negative (1 Ohm Load) Like Shown How Do I Hook This Up To The Amp? Because The 2 Outside Terminals Which are Usually Positive Negative Are Positive Positive

Got some factory pictures just now -- it's shipping to us soon. Assuming all goes well we'll start production of this and the 2500D v.2 very soon! * I had mentioned we were working on double inputs but it wasn't going to work out with the narrow casing. Outside of dedicated SPL the difference is not significant, though. * We got the production RCAs on this prototype. * BEEF

Hi so I have a saz 1200d I'm trying to tune it an with the crossover having a wide range from 35hz to 300 I'm trying to find 80hz to 90hz...I have heard that half way was 80hz but Idk... I'm looking at it like the 300-35= 265/2= 132+35= 167hz would be half way with that math.

YEAH!!!!!!!!!!!!!!!!!!!! I JUST BOUGHT A SUNDOWN SAZ3000D!!!!!!!!!!!!!!!!!!!!!! I'M KINDA EXCITED FOR IT...

I have a saz3500 that i bought with my z v2 15's and i was wondering whats the difference in the models

Heads up to everyone about our schedule. Most of the guys going to Slamology will be leaving on Thursday to head up there. I am leaving Friday morning. We will have a booth to show our products at Slamology; we will also be giving out signed posters with our new company model -- if you want to see you'll have to attend Slamology or wait until afterward All of the guys attending Slamology will be back to work on Tuesday *except* for me (**). Limited staff will be at the shop the entire time -- we will not fully close the shop at all but operations will be severely limited Friday and Monday around the weekend of Slamology. ** - I am actually taking a family vacation th…

Enjoy !

The old thread got cluttered and I think people thought I was out and forgot and left the thread pinned So, I started a brand new fresh thread... the blowout sale is still going on. ----- The SD-1 model is being closed out and discontinued due to sluggish sales. They will still carry full warranty as I will hold onto some of them for warranty replacements: http://www.sundownaudio.com/ppsd10.html -- 10" Model Information http://www.sundownaudio.com/ppsd12.html -- 12" Model Information These subs perform very well... see some first hand reviews here: http://www.soundsolutionsaudio.com/forum/i...?showtopic=9883 http://www.soundsolutionsaudio.com/forum/i...?showtopic=9264 --…

I thought this woofer's basket was gonna be purple ish, but the blue is just sexy. the dustcap = sexorz. very well built woofer. the 2nd one is comin in tonight so umm whats the cone made of? and whats with the shineyness?

Prototypes arrived today... working on doing full break-in to measure official specs. Honestly I am super happy with the prototypes -- I do plan to tool a magnet boot and put our logo on the cap but I don't think any other changes are needed at all. SD-2 12" Measured Mounting Depth = 5.25" SD-2 10" Measured Mounting Depth = 4.75" ----- Early price estimates -- MAP price (actual price paid from dealer) (SA cost for comparison) SA-10 v.1 : $185 SA-12 v.1 : $195 SD-2 10 : $150 SD-2 12 : $160 Pre-ordering would be something like : SD-2 10 : $115 SD-2 12 : $125 That would be shipped in the continental 48 states. Once I do some testing we'll have an ETA and a time when pre-orde…

Original discussion topics here : Sundown SD-2 Line Photos - Car Audio Classifieds Working on 500-watt Line w/ Reduced Depth - Car Audio Classifieds ---------- ETA for these to arrive is end of September to beginning of October. As always this is subject to production and transit delays so please be certain you are willing to wait before placing a pre-order; if you have ANY doubts please wait until they are in stock and shipping to order. Pre-order policy is no refunds due to delays. To order please PAYPAL to [email protected] and specify size / quantity / coil configuration or contact your favorite online or local dealer; they can contact us for details if neces…

http://www.caraudioc...prototypes.html ** Thread of prototype development As with any pre-order delivery times are an ETA (estimated time of arrival) and are not a guarantee of the delivery date. DO NOT ORDER if you are not okay with possible delays on the delivery. That being said the ETA is middle of January 2013 on these. ---------- Pre-Order Price : $115 Regular Price : $140 Pricing is shipped in continental 48 states. Contact us for a SH quote to AK or HI. !!! THIS IS FOR USA ONLY !!! To order get in touch with your favorite local or online dealer or send a Paypal in to us at [email protected] YOU MUST INCLUDE YOUR NAME AND ADDRESS. If these are both not in…

Grabbed a 10" right off of the QC test bench for some photos :