Build Logs

It's that time.... I'm bringing it back to the lanes. stay tuned. Twisted Sounds power Twisted Sounds lithium batteries DSS Tridents Singer Alternators. Sky High wire. Toolmaker aluminum parts. Previous build #1- http://www.soundsolutionsaudio.com/forum/topic/51385-ssas-evil-ss-camaro-4-evil-15s-and-2-dc-75ks/?hl=camaro

I just want to share my Simple Set Up... Ride: Mitsubishi Adventure HU: Pioneer P7150UB Raws: 2 pairs Cadence FX8M4 Amp for Raws: RE XT1600.2v3 Tweets: 1 Pair Cadence CVLT35B Amp for Tweets: X12-805 Wiring: Cadence WK41 Gauge 4 kit, Ryan Audio, Audiomax 2nd Battery: Sprinter S12V370 SUB-(JBL P1222) FI SSD 15" Full Option SUB AMP-Sound Magus x1502 Installer: DIY Thanks SSA

It took a little longer then expected, but my brother and I finished his truck stereo. The center console came out great!!!! My brother did almost all of the fab work, as I was busy with school and couldn't help much. We decided to go with a sealed enclosure for the death row at about 1.5 cu ft. It sounds fantastic in his truck. I wouldn't hesitate to run them in sealed boxes. His front stage consists of aura sound buyouts and vifa tweets with the madisound XO for them. Here are some pics of the build. Took a couple weeks to do everything. The box itself is in 3 parts. The enclosure for the sub, then the separate piece with cup holders, and the top piece that house…

So I'm gonna make one anyway, so why not start now. The current equipment: Kenwood Excelon KDC-X692 Pioneer 3 way 6x9's(4)(1 in each front door and 2 in the rear deck) Bazooka EL500.1 Crappy Scoshe wiring for sub amp 2 MTX RoadThunder 12's(sealed pre-fab box) Excluding the Headunit, everything is not as good as I want. I have 3 shipping boxes in my trunk right now that contain: TEAC 2x100 amp(bought for $15 from Spy. Thanks dude) Phoenix Gold RSD6CS 6" Components KnuKonceptz Kolossus Fleks 4 Gauge 4 Amplifier Installation Kit I hope to make the speaker adapter(for the 6" to fit in the door) and install the comps pretty soon. I'm also removing rear fill. After that, its …

so my old build log had old stuff. I was indecisive and procrastinated a lot. I needed a fresh start. Here it is. amp: Sundown SAZ-1500D Second Battery with One run of 1/0 welding cable: Optima yellow Top

I had a thread on here a while ago but just decided to start a new one. I really only have been updating the build log on DIYMA but I'm bored so I am making a new one here. System consists of CD1-Pro Mini Horns for the Tweeters, X69 for the mids, and a Kicker IX500.4 bridged to each pair. That is what is in right now. Right now I just started on an Infinite Baffle set up to mount 2 15" Dayton HFs. BTW I know pics of the car will be requested so when I clean her this weekend I will post some new ones up.

Just about finished it all up today, got a few more things to touch up but for the most part it is done. First off thanks to Matt at MCOR for giving me a hell of a deal and JL for coming through in the clutch and sending me a free t-shirt! The goal of the install was to get much improved sound while keeping it stealthy. I choose to go with JL Audio C5-650 Components powered off a Sundown 100.2 still with the factory head unit. The mids were placed into the stock locations, with baffles made onto the 6x9 brackets and the tweets placed into the kicks. Just about all the wires were techflexed, heatshrunk, and labeled for cleaniness and ease of install. The amplifier and…

I will get straight to it. I have a 2006 Dodge Ram 1500 ST. Inside will be a combination of items. For head unit I am using a Pioneer DEH-P6000ub, For proccessors I am using Audio Control Four.1, Epic-150, and a 24xs Crossover. Amplifiers are Soundstream PCX1500d and Rubicon 2.250. For subs I am Soundstream PW15s subs and door speakers are Eclipse 8062 6.5" Components with Soundstream TSW.3 tweets. For power I am running 2 Shuriken SK-BT60 batts. and a Power Acoustic 10 farad capacitor. For power and ground I am running 2/0 main scaled down to 4ga from the dirsto to the amps. New box dimensions are as follows: External dimensions: 58.5"w x 16"t x 9"d. Internal space is 3…

aight after the 3x event i went to this weekend it made me want to give my g/f something she can bassrace with cuz she actually enjoyed it alot. so i figured hell we got a new vehicle together and she still has her old car. so i decided i am gonna wall it off with 4 of the cheapest 15's i can find and im gettin a fosgate 1501bd *old school badassa amp* for 200 from a buddy of mine. i just spend $129 shipped on subs and $200 on an amp. so im at $330 i have a head unit, got some wire, pretty much have everything covered. probably gonna buy some cheap car batteries to throw in the back. tryin to keep it under $500 for the whole build. my goal for her is a 139.9 bas…

Well, I already installed most of it but I will be updating right now these are just Cell pics but hey will get better.... System Specs: Subs:2 RE SE's 12 Amp: Us Amps Xt4000DEv2 Wiring:Cheapo 4 gauge Headunit: Pioneer Some Pioneer LOL..... ------------------------- Future: Alpine Type R 6.5's Mb quart amp 0 gauge wiring Big 3 Alpine HU Clarion EQ Soundstream BX-10 Some Pics for all you whores......LOL Crappy Pics I know!

Hey guys.... Been a while since I have been here. Glad to be back. My progress has been slow due to work and procrastination ( and a little too much reading ). I will post more pics up as I have made more progress than my Flikr account shows. I will be starting work on the A-Pillars and Center channel shortly. Kronos and Leviathan have been installed and I absolutely love them. Any questions just shoot me a pm. http://www.flickr.com/photos/49617895@N02/

I think I have yet to do an actual build log here. We will see what you guys think of this and maybe I will post some more here.

This is just a get loud build. And loud it is. SQ was out the window before the pen hit the paper in discussions about this build. So don't tell me it will sound bad.

I'm started a new build for my 2007 chevy avalanche. the box will be 25 cft. 9 cft per sub with 400" port area tunned to 37 hz. I'm using 9518g subs pushed by a hifonics xxv sampson with 8 kinetiks hc1800 batteries. I provided a link i have too many pics to post here.please give me any feed back.I still have alot of work left .this is just the start. http://s948.photobucket.com/albums/ad328/cmcveigh74/

So, last Saturday me and my dad got to work on my Cavalier. And it's time for me to give back to the community some. And away we go! :slayer: First part Big 3! 2004 Silver Chevrolet Cavalier^ Engine bay with battery and intake/filter removed^ Battery/filter bay.^ Crappy wiring which I hope to make really nice by mounting amps to back of rear seat.^ Head-amp removed as per last album's releasing of magic smoke. You can find that here.^ Current amp rack. Crappy job really needs some tlc.^ Current amp rack from behind. Crappy job really needs some tlc.^ Wiring from cab to computer/engine bay + 1/0 awg for amplifiers in trunk.^ If you can tell that's the alternat…

Hi All, A while back I had come up 2 designs to build for my 12" BTL. Click Here for Topic on Box Designs This next thing is quoted from the topic on the box designing. so this past week we started the build. pics below. so we started by trial and error on the kerfing. failures are below. then we finally got it right. we did .25" spacing for 4 inches, it should be a total of 17 cuts. and we also left about 1/32" of wood left. very thin. so after we got that right we finally started cutting the kerf for the other boards. we then ran into a snag with the paint can. when we opened it up it was broken. so since its easier to paint the pieces when they a…

I accidentally put a post about box help in the build log section the other day but this will be where I put my build log if anyone who can wants to delete that box help thread but to the build 2 zcon 18s Saz 5000d Xs 2400 Xs 7500 Two runs of 1/0 gauge positive and negative Pioneer touchscreen Kicker 350.4 Singer 6 phase alt Bulk pack of damlifier pro And I think I'm going with the ia component set I will upload more pics when I get home but I need permission from ssa to do this so if they give me a thumbs up I'm going to cut out pretty much a metal box with this design on the sides with no ends so I can run all my wire down the middle on the floor board through it and…

Havent been on SSA too long but wanted to post my log, so enjoy. (this will just be a few pics rather than the 50 or so) older build with 2 DC level 4 15s

Here we go Epoxying the rear liftgate Amp before After Lights out Knuconcepts 1/0 fit Amp rack legs made with home made table saw

guess i will go ahead and start the build log...... so, this is about where we decided I should be taken pictures, most demo work was done before i got the cell phone out, no camera for a while yet. took out the rear seats completly and made up some panels to replace the void. have started some of the electrical upgrades as well as some basic deadening.

Here are some pictures of my 2005 scion XA that I built. I dont have all of them but enough to get it up here though. Sorry for some of the picture quality and lack of info for each picture. I will do a good build log on my next project.

"OK, lets revive this build log. I need you to post what you are gonna be running in your wall. I need to know the subs, the amps and the batteries that are going to be used. This is the information i got off of your video, if it does not match up to your Aviator, let me know immediately before i start the build process. Baffle = right behind front seat area Height - 42.25" for baffle height, 38" once over the hump. Width - 50" in baffle location, 44" wide throughout the rest of the vehicle. Width 2 - 41.75" wide if box goes to the headliner.. Depth - 37" on the hump, 63" total. 2 questions i have- Depth - am i to assume that you can use 26" of depth in between the hump…

I have a 2013 Chrysler 300 Base Model i'm installing a new system into by myself. Right now everything is stock. Watch my videos to hear my story, my goals and see my progress. Any advice is much appreciated! Many Goals. Ill edit this post with a spec list and whatever I can think of when I have time. Introduction https://youtu.be/xle8qN4l3Wk PART 2 https://youtu.be/owV6edKeDzE PART 3 https://youtu.be/eE4JhrF3eS8

Here is a few pics of the whole trunk with Fat Mat rattle trap (this stuff is half butyl and half asfault). Trunk Lid Floor Area left side Right Side Latch area Here is a few pics with the new rims. They are 24 inch Menzari's with 255/30/24 Nexxon tires. I know a few of you are going to like my license plate. You might have to click on pic to view the whole thing. Passanger side Close Up Rear Driver side Front Driver side Here is my set of Rainbow 3 ways I just put in. plate put in place of factory 6X9's Factory 3" Cut out to a 4" size after factor 3" replaced with rainbow 4" Here is pics of all the wires that make up the madness. Here is a pic of the amps…

Just realized I have been posting this build everywhere except for here. Allow me to share: :cool: Amps on the left and right, Processor in the middle. The white plexi is going to be for wires to run through from the audio processor. The rest from the amps will go to the left and right of the amp rack.