Build Logs

Got the call from someone local to build a box for his setup. He has 2 SSA Evil 18's on 2 NS-1's at 0.5 ohms a piece, with 4 XS D3100's and a Mechman 270. His current box was initially built for 4 18's (something like 18 cubes net) and stuck WAY above the window line. He wanted a box for just the 2 that he has, a lot smaller box, and something with a little "flair". Well, here it is... Specs: 13.2 cubes net 12" Octaport 32.3 hz Double layered all around (except sides) Window style bracing Bolt terminals Bedlined outside with a fire-engine red port Be sure to watch the video at the end!

So I figured I'd start the build log for this car, Its gonna be a little slow to begin as the first big step for the install is going to be a pain in the ass. For those that were looking forward to the bronco build, and wondered what happened to that.. well the truck was wrecked, and the body work that is needed to be done is now quite extensive. So the work on that will be to bring it back to its original beauty before any audio work is done. The car is an 2013 all wheel drive Chrysler 300 with pearlescent white paint. (uploading picture atm) Already has the Team SSA sticker on the back window (uploading picture atm) My current temporary plans for the audio ar…

i have a '96 toyota t100 and was going to put two 12's in it but have no idea where i should put it. The back seat has no space under and i was wondering if it is at all possible to drop the bottom out just to where i could fit my speakers or if i just just put them under the driver and passenger seat.

I figured I would start this log since I have been getting asked what I've been working on. This has been in the works for a few months and I'm still collecting equipment. All equipment under the window line and behind the b-pillar. No blow through. Amps and electrical in bed. Not to exceed the heighth of the bed and 36" back from the front of the bed. 92 Chevy S10 ext cab. 3 15" Ethos (stock built) 2 B2 Zero.7 amps 2 Mike Singer 350a alts A few super capacitor banks. No batteries. Questions, comments, rude remarks welcome. ## rebuild on page 52

So I picked up a 2011 Jeep just over 2 weeks ago and I am starting my build, its going to be a long time before all is said and done but ill be slowly accumulating the pieces over the next 2-3 months. I had a box designed and I am almost done building it. Its 5.5 cu. ft. tuned to 32 hz and my truck If anybody can help me i dont know how to rotate this pic^ Im planning on 2 12" ZCONs D1 fully loaded on a BC5500 Im thinking about what to do for the front end, I'm probably going to keep my stock head unit and go active with a 3sixty, MiniDSP, or a Bit Ten D. and Ive been looking at PWX 6.5s to replace my stock 6 x 9s but im open to any other opti…

I have a 1993 Chevrolet Camaro that a customer wanted to put a little bump in... Install includes: Pioneer DEH-X7500S Sundown SA-8 v1.5 Old Rockford Fosgate 300w mono Box by me Soon to come some door speakers... Now here's some pics...

Please post some Incriminator builds If you are using New IA Products. Thanks

Impaler because its an Impala. Im clever right? first box mocked up: First day the subs came in: Speakers came in: Subs amp: Both my amp's Current box is fiberglassed and use's T nuts to pull the subs in and out. Not designed by me. (g2shuck) Subs are: D4 Alpine type S 15's Rockford P-500.4 amp on 4 gauge Q1-3500.1 (4,300 watts rms at 1 ohm) on two runs of 0 gauge. Wired to 4 ohms All power wire, and Rca's by Knuconcepz. Stock alternator. Stock Effing headunit for the moment. Coming soon are: Deck, odds and ends wiring, and more 6.5's Stay tuned.

Wow... It has been years since I've been on here. But I can say, this website taught me a lot when I got into the industry almost a decade ago. Now I'm in college and build/design boxes as a side job to make some money (pretty good money some months). Bought a TJ a little over a year ago, and finally decided it was time to do a semi-permanent system (something I could easily remove if I needed to). Didn't want to spend a whole lot of money, because well, this vehicle has plastic windows. Good luck was in my favor because over all the years of helping people out, they helped me out. I got the sub for free and the amp for $50. So anyway, onto the build. I wanted a box t…

This is the initial start to what i like to think will be an amazing set up and time. Between the components I've chosen, too the input needed from the lovely forum members here at SSA. I believe we will make this a real beauty!!! -So let's start off with what's been ordered thus far (2) Incriminator Audio Death Row 15's(2013 model) 1500 rms/Dual 1 ohms(1) Soundqubed Q1-2200D to be ran at 1ohm/0AWG Now for the components still to be added to this final build. I mean when i say done properly, I want the enclosure just right down to the detail, the right amount of power with flow of current/amp hours to take the beating and all around electrically correct for a build, and S…

This will probably be slow but here is the start the truck my Head unit kenwood Obsidian v2 12s and power for now kenwood 9105d no pics but I have done a big 3 with stinger 0 gauge ofc also I just ordered a IA 10.1 and also a set of crescendo audio cz 6.5 components

About to start my first wall in my ford ranger extended cab. Fourth Order Bandpass for three RE 12's.

Hi SSA guys. My friend and I just recently picked up a very cheap car and we are going to turn it into a Zombie Apocalypse Vehicle (ZAV). All of the modifications will be done by hand using readily available materials. This is purely for fun and everybody's enjoyment. First things first, every Zombie car needs a sound system!! So this is what we have done. Searched amazon for some of the cheapest 15" subs we could have shipped. We came upon the Absolute USA SN 2000 subs. $30 shipped each. And to make it even better, found a iPod docking deck for $27 shipped. After that we went and got some wood. 3/4 OSB had the best price. Used left over wire and fuses from previous bui…

Here we go, starting the lightweight, simple install in the Miata First off some pictures of the car, keep in mind I was always too busy enjoying driving it to do anything else, like cleaning it Just after a wash, comparing it with a friend's Z3. Mock-up of the 7" tablet. Fits great in the scene Target for the entire system is under 30 lbs. That includes wiring, fiberglass, minimal deadening, speakers, amp, tablet and miniDSP.

Well, after relentless debate over the ol hoopty I suppose Im gonna brush the dust off off her, well the leaves, acorns, and pine needles actually. She's been worked on and stalled and repeat and parked and well down right neglected as it wasnt a daily driver anymore. Ive pretty much figured hell Im this far and she has never let me down so its time to pamper the bitch and get her back on track. The ol Hoopty is in route for 2 18s....I got the enclosure mapped out for it already etc. Im doing a pair of Evils...thats the mission for that even tho gear is a bit out. Ummmm Im aiming for the Punch Pros in the doors. I think I can do that hoping I dont have to mod the…

Hey every this trend is for all you custom box builders who would like to show your box, wall pictures. So post on everyone and lets see your custom work.

Got a 2009 Pontiac G6, came with 15% on all windows but the front windshield. Black Dubs rims. Audio Wise, right now; Later will be cosmetic stuff, like HID headlights and 5% tint on all windows As for the build: SQ/"SQL"/SPL.....to be honest...I don't know. I just want loud and ground pounding. Here's the upcoming stuff going/being done in this ride: H/O Alternator built by Micheal Singer (Being built) All stock speaker wiring torn out and Knukonceptz 16 gauge installed AudioTechnix 12 gauge for the subwoofers AudioTechnix 1/0 gauge powerwire Kno Knoise Resonance Control Bulk Pack 52.5sq ft (2) Sundown Audio NEO Pro 8" midbass *O…

Gonna be doing a simple but effective build in my new dually. I just want a decent sounding setup that doesnt break the bank. Plans........ Big 3 Pioneer head unit Probably JL components (i really liked the C5's I put in another build) Custom glassed sealed kick panels 4 channel amp on mids/highs BC 2000 on sub(s) maybe.... unless I choose a big 4 channel to power it all. Looking at running a single 12 or two 10's sealed (space very limited), Sub choices are limited to somewhat shallow subs. I may do the Sundown SD's since I have heard them first hand and they sound ok. Vehicle and photos of interior

I am helping a buddy revamp his install. He was using a JL Audio component set for the font stage and JL Audio 12w6 subs powered by JL Audio Slash amps. He bought my P99RS from me and is now running active I gave him a quick four hour tune while drinking some beers and we got the JL's sounding really good. Good enough to be winning competitions but he wanted more. He bought a set of Seas components and is hoping for a better sound. I recommended a different route but this is what he choose. We have a lot to go yet on revamping his install. Here are a few pics of the Seas midrange install. Old MDF baffles that I told him had to go. I made new baffles out of cuttin…

<p> This is just of the sub portion since I already had everything else installed and replaced sub stage. I went with Quentin's box design, 12" XCON D2, and BC2000. Only thing left is the 270a Mechman. I'll just run through what i have. Kenwood excelon, 4 kicker ks68 6x8's, 2 kicker tweeters, each Tweeter is in parrellel with a 6x8. running the is a MTX te404. Looking to upgrade speakers sometime in future. All 0 guage wire for big 3 and ran to the back baterry and sub amp then 4 guage from batt to te404 amp. Replaced my MTX Thunder 9500 12" and a MTX te1501d. Here's the pics.</p> <p> </p> <p> </p> <p> </p> <p>http://s…

also had these made for my door speakers cause for some reason I have 6x9s in the doors I got to installing them today. with the crescendo mezzos I bought of S. DeYoung I believe his name is.

I messed up this thread its my first time posting pictures but hopefully they show on this thread I fuc%ed up and for some reason posted two threads sorry but this is my box built by dave the box guy 1.4 cubes tuned to 32 hertz and the speaker mounts also built by him. they are for my crescendo mezzos bought of S. DeYoung. I installed them today.

Hey all! Much like my previous threads I am starting another part of a build that will be completely documented through video. The support for the door pod series was awesome and I hope you guys enjoy this series just as much. Just like before I will be video taping every single step and editing all the information together to present to you. If you haven't seen my videos before I hope that you enjoy them and would love to hear what you think! If you missed the seeing the door pods I mentioned above here is how they turned out: http://www.youtube.com/caraudiofabrication'> If you would like to see the in depth process of each step for how I made these door pods th…

Start with pics of new components,sub & amps. More pics to come as build progresses.

After being on hear for years I just realized I don't have a build log: From earlier this year! This setup did a 148@54hz