Amplifiers / Head Units / Processors / Electrical

I need a little help on this one i was going to buy the Knu Kolossus Fleks 0 Gauge wire for my Crescendo 3kwp but they just came out with a mix breed wire the Kca and it is half the price witch to me is great cause im in hight school working part time dish washing lol but would there be a audible difference ? thank you.

I'm looking to buy around 50 ft of 1/0 awg power and 25 ft of 1/0 awg ground wire. Whats every ones thoughts on knukonceptz? It was introduced to me by a local friend and I'd like to know what you guys think of it.....

I'm looking at this kit for my 96accord to wire an SAE-1000D in my trunk to an ssa icon. Its the first time I'm doing anything like this, so I am trying to ensure I don't mess anything up. I tried to search but didn't find anything. http://www.knukonceptz.com/productDetail.cfm?prodID=KFX-AK4 and this one http://www.knukonceptz.com/productDetail.cfm?prodID=KOL-AK4 The only difference I see is that the cheaper one comes with a 5m RCA cable instead of 6m, and also says the RCA has a built in turn on lead. So if I go with this one, I will have absolutely everything I need to wire my sub amp. And with regards to wiring, I have to keep the RCA and power cable separate, cor…

Hi, I was buying a pair of KnuKonceptz Krystals, but a few days ago I heard something bad about them. someone told that Knus were made by the same manufacturer of Stingers, but was a kind of second line. Is that true? Are they any good? What would you recommend to me instead of them? Ps.:My last ones were Monster XLN301. Thanks!

Hello I need a new complete 4ga. amp kit,and I come across the KnuKonceptz. The Amp kit will be used on a AudioQue AQ1200D.(1200x1) Whats the difference between these three complete 4ga. amp kits? Is it worth the extra cash,or is it a waste? $26.99+shipping http://knukonceptz.com/productDetail.cfm?prodID=KLM-K4 $39.99+shipping http://knukonceptz.com/productDetail.cfm?prodID=KOL-AK4 $51.99+shipping http://knukonceptz.com/productDetail.cfm?prodID=KFX-AK4 Thanks

I'm getting ready to do another electrical upgrade and have been poking around a bit. Thought I'd try out Knukonceptz's gear this go around. I saw some of their lines use compression fittings and really like the design. I've never been that big of a fan of smashing a wire in with a screw but it does work. Any experience with these fittings? Often something that looks cool doesn't always play out well in the real world. I've used compression fittings adapting hardline to braided hose and sometimes it can be a pita. Although this is a little different, wasn't sure if they were worth the effort and how secure the connection is. Thanks! http://www.knukoncep...mages/Komp…

This thread is not meant for bashing but what is this a good 0 gauge wire? A friend of mine had a bad experience with the Knukonceptz KLMX Kable, but is the Kolossus Fleks Kable better than Stinger 0 Gauge?

will the knukonceptz battery terminals work on XS batts?

I will be getting a new car soon. I honestly dont want to use my current 4 gauge as it limits me to <1300rms I want to go straight to zero gauge so I dont have to worry about the wire in the future. I wanted to go for Kicker, but wire is wire and Knukonceptz seems to have a good reputation here and seems to be cheaper. I also heard about Welding Supplies, they seem like another good option. However, I recently read a thread were one of the wires (dont know if Knukonceptz or Welding) was made of CCA (copper covered aluminum I believe). All I remember was that CCA wire should be avoided. So now I ask, which one is the one to go for? I really cant make a mistake since I'l…

Hey guys, i'm looking for 1/0 gauge wire for a big 3 upgrade. I was researching some wire and it seems that 1/0 is pretty damn expensive. I stumbled across this brand knukonceptz which was the cheapest, and i had to post something to get feedback, because i noticed in their description that their wires are made up of 90% aluminum and 10% copper. Now for an amplfier i wouldn't care, but i'm pretty sure for a big three upgrade i'm looking for least resistance, and that wire is basically all aluminum. I'm not trying to bash the company, but would you guys recommend this wire for a big three upgrade, or should i go off looking for something that has pure copper threading in i…

What's the difference besides the price? I know that the Kolossus cable is supposed to be thicker than standard AWG but is it worth almost double the price? Referring to 1/0 awg wire with an Audioque AQ1200D. Wire would be for power/ground/big 3.

hi, i have this amp : KOIILER XM-6666 2CH 420W and i want to add to my 2001 bmw x5 , i have one each door 2 speakers -1 bigger size regular oem speaker) and 1 a smaller size (twitter oem) and also on the top dash i have 2 twtters oem's and i see in trunk that i have all wires coming there, i also have a box with 2 speakers (it looks that is the sub-woofer) so now how should i connect all this to my above amp with out burning those twitters ? the head unit in front that i am using is the new dynavin e39a (d95) from dynavin[dot]com let me know ,any advice! thanks

I found this amp while searching for a good cheap amp. I know that if I spend the extra ($400) I can get a good amp, but this one sure looks like a RF T1000.1. Even if it isn't, does this look like an amp that could give that 1700 watts at 1 ohm? http://www.sonicelectronix.com/item_8403_K...KX1-3000D.html#

Does anyone have any info on the new Kole Audio TRAX1-7000D pics , tested RMs rating anything would help

whats the difference between the kolossus fleks kable vs kca kable, installed on a system of atleast 2000 watts rms, wit stock alt and bat, i know that you see a dif when running high power, but with low power? would the kca kable do a good job for the Big 3 just wanna know so i can order the kca kable, dont have enough for the kolossus fleks thank you

What are the pro's and cons of Korean built amps compared to Brazilian and Chinese. And for daily spl builds which is better.

I've seen these batteries locally in Houston but can't find much info on them. Looks identical to a kinetic. Cheap rip off? Or just a generic at a lower price?

holy crap they are making a monster too http://www.kicker.com/ShowPage.cfm?filenam...tml&menu=KXAMPS

was wondering if anyone has benched these yet. was wondering how much power they put out at 4 ohms bridged. al

I just got an L.A. Sound 4 Channel amplifier, model number S835, it was given to me by my uncle, I tested it with a 6x9 and a PC power supply and all the channels seem to work, it's supposedly 800 watts (max I'm assuming), has anyone ever heard of L.A. Sound or used any of their amplifiers? Were they any good?

Alright guys, I was helping my friend install a system in his HHR that he just got, and he wanted to keep the stock headunit. I don't know if the problem is because of the factory headunit not excepting the line out converter or what. The problem is that once we installed the line out converter to the proper wires the front 6 1/2's stopped working. We tapped the rear speakers for the line out converter. I did not solder the wires I don't think that is the problem though. The thing that is weird to me is that the tweeters still worked, the rear speakers still worked, and the sub and amp worked. So do you guys know anything that we can do to fix this problem. I have looked …

can i power car amplifiers in home using a lab dc power supply?

Alright.. this is a noob question im sure, but i just dont know exactly how its done. problem is i set up my little truck using a deck with 3 pre outs, was able to run the 4x6's on the dash, 6.5's in the doors and the subs in the back.. now i got a deck with 2 outputs.. basically lost my door speakers. i know there has to be a easy way to make this work. I have all the rca's ran for each channel and a 4ch amp in the back but only able to connect the front channel. Hope i made this clear enough to get some help.

So my buddy was sellin his Lanzar MaxP1200 amp for $70 and i picked it up for the hell of it, So my question is, What wrong with Lanzars exactly? They just really cheap? It says 1800 watts @ 1ohm but i dont believe it so im gonna run it at 2 ohms (900w rated) for the time being Is it a decent amp to run my Icon off of for a couple months until i buy my Audioque?

Ok im gona buy a new amp and every time i go online reserching i find this amp's like the "Lanzar MAXP2960" real cheap under $200. WHy is this? are these amps way under power, and if so about how many rms watts is it;. Lanzar MAXP2960 Lanzar MXA254 Boss PH2.1500 Lanzar VBP281 Lanzar VBP261 Power Acoustik BAMF-2600/2 (BAMF2600/2) Lanzar MXA282 SPL FX2-2600 Autotek AT2000.1 Are any Good i was thinking about buying one HELP PLZ