Sound Solutions Audio (SSA®)

Just in

Hey guys, would anyone have the data to use for plotting an XCON 15" in WInISD?? I can't find anything on here so it would be a great help..thanks.. Here is a screenshot of the data I need..:

Whats the difference between the old and new versions?

I swear to god Ive had to demo this thing for people like 50 times. I gotta say Ive had some very positive comments including a lot of " thats one 10? "'s But I think Im ready for a something that I can actually turn up the gains :-)

original original Anyone else got some dcon, icon, xcon, love?

I'm curious what the main sound difference would be between a 1 vs 1.25 cu ft box tuned to 30 hz? I'm trying to build a custom box in my fusion against the passenger side wall in my trunk. I can maybe get 1.2 cu ft if I run the port outside the box, otherwise I'm looking at a net of closer to 1 with a round port. Alo, how important is it for the port to fire out on the same plane as the woofer? Would it be ok to let it fire out the side toward the rear seats with the woofer firing across the trunk? Thanks

Is there a big difference in output of these in a sealed box (2.5-2.75cu) on about 750 watts?

so i picked up a ICON 15 threw it on a JL 500/1 in 3.5 cubes or so tuned around 30 sounds good on those long lows. but she listens to it all.. so i think im going to build a sealed box for it.. i like the sub.. even with very little power on it

Since the ZCON is soon to be released, thought i'd share some photos I took today (with my cell phone!) of the 15" Prototype more to follow as I edit them...

Is that the real estimate in your store? not sure. just double checking. 18'' xcon to 96816. thanks

I compete in MECA and went to my first comp. today with the xcon's. Did my personal best of a 151.1@40hz Also did a 127.6 in park and pound....mic outside the vehicle 6 feet away. These subs not only sound awesome but can get pretty loud too. Did 3 p&p runs back to back (30seconds full tilt) and the subs handled it fine, didn't get warm or smelly setup is 2 15" xcons's on a crescendo 3500

This may sound strange, but I was wondering what would be involved with getting more details on the actual dimensions of the ZCON and XCON 15" Basically like the magnet diameter, thickness of it, etc. (an actual technical drawing would be great too!) Reason I ask is I am working on a design for my friend's car and have enough cubic feet but limited height to work with, so I'm trying to see if I can make one of these fit. I want him to be an SSA guy if possible! Thanks in advance!

While I'm awaiting shipment of the beast I'm working out the design for its future home. It will be going in a center console of a single cab Silverado. At this point it looks as though I can squeeze in 3 cubic ft after all displacements. I'll be running it off a SAZ-2500. I'm wondering what i should tune it to. The suggested range is 29-34. My port area figured up right now will be 40.25in^2. (11.5x3.5).

So, I installed my new dcon 10 in a box that was built by a local audio shop 1.25 cu ft with a slot port that is supposedly tuned to 32.5 hz. I have this enclosure rear firing in my 2010 fusion with 300 watts crossed over at 80 hz. The main thing I have noticed is that the bass is very loud around 40-45 hz with not much in the 60-80 hz range. I'm wondering if this is just due to in car cabin gain and something I am going to have to eq out or if its possible that the box is tuned wrong? Would going with a lower tune, like 29 or 30 hz help with smoothing the upper frequencies? Just trying to get the best bass I can out of the system.

any body out there got a blown 12" icon willing to sell for $80 send me a pm

So I just recieved my 2 new Dcon 10's today and upon installing them, I noticed a strange noise that I could best describe as a rattling(as if someone was holding their finger slightly against the sub). I can't seem to isolate which sub it is coming from but when I take a sub out, the rattling stops, same when I take the other out, yet when I turn one around and reverse phase, it starts back up.... I seems to start as soon as any back pressure is applied to the sub. The subs haven't broken in but the volume is low when this is occuring. I'm kinda freakin out since I already had to wait a month before the subs even came and now I'm at a loss and could use some help. Sorry …

SSA Dcon 15" Due to a large number of PM's and emails over time, with some design tweaks to the existing design, the Dcon line is able to grow. Please excuse the grainy cell phone picture, as my camera is packed for my move this weekend and I was excited to post up the news asap. Introducing the very first Dcon 15. No, we don't need to send it out for free demo's, because I know people will ask. I will post specs once we are set and ready to go with these to production. Box designs will follow, it probably wont be as low Qts as the 10" and 12" model are I believe, lending to a more average size box, compared to the smaller then average size boxes for the 10" and 1…

Where and how much can i get a recone for an ICON 12" dual 2 vc. Thanks Backyardbass97

is there a 10" xcon??? or is it a mistake

Any updates on the xcon's? Paid for 2 and recieved 1....keep getting told 2-3 weeks on the 2nd Just wondering because my team is hosting a comp on the 18th and will need something by than.....gonna hate to do it but might have to go with something else Thanks

Will the Icon 15 be offered in D2's again?? thx

Just got these up on the shop finally. 3 Left. We can order more. http://www.soundsolutionsaudio.com/store/products/SSA-BANNER-6ft-x-3-ft.html

I'm looking at getting an AQ2200, now I don't think it is too much for the sub when it's broken in, but what about breaking it in? Just keep it low for a while? Thanks

I know the DCON's are rated at 300 RMS, what is the maximum RMS that I can run to them daily?