Sound Solutions Audio (SSA®)

Currently running JL 12w3's in a ported box @30hz with 900 watt rms. They get low and don't sound bad at all. But not real loud. Not looking to up my power, and am very curious to try a different brand. Thinking of the dcon 15's. But it will be easier to stick with 12's. So my question is will the dcon 12's give more output than my w3's on 900 watt rms in a 4 cu ft box at 30hz. Or should I just save for the 15's and a new box?? Hoping someone here had experience with the w3's and the dcon's and can chime in.

I'm curious what the main sound difference would be between a 1 vs 1.25 cu ft box tuned to 30 hz? I'm trying to build a custom box in my fusion against the passenger side wall in my trunk. I can maybe get 1.2 cu ft if I run the port outside the box, otherwise I'm looking at a net of closer to 1 with a round port. Alo, how important is it for the port to fire out on the same plane as the woofer? Would it be ok to let it fire out the side toward the rear seats with the woofer firing across the trunk? Thanks

We are very close to releasing an all new ZCON! #ArriveLoud http://www.SSAudio.com

i have pair of dcon 10's. I want to make an enclosure for them and its recommended 1-1.25 cubes 28-33 hurts. what does the smaller size do? Would that mean more power handling? More punchyness? I have a us amps merlin md1 for power and plenty of juice for supply. also what does the tuning frequency effect. i listen to a broad array of music slipknot and mudvayne lamb of god to eletronic and rap. i know there is no perfict setup for all but what would you recommend? I have a 2005 civic sedan if that helps. thanks

What's the typical build time on SSA evil subs

I have a 350z and I was looking for a good sub to have ported....i know dustin from dc creations and okc and he said i should check out the gcon. Reason for the gcon is that I wanna use my old amp i still have which is ED nine.1 monoblock. The problem I was having was the space issue and and the weird shape of my trunk with the strut bar in the back. I was hoping this would be a good combo for my car cause im tired of not having any lows. I was originally gonna get a SA8 or a 10 but Dustin said these subs are pretty bad-A. Any help from ppl that have messed with a Z or know if i should take a different route or any help would be great.

So yesterday i installed my new 10" Icon with a 125.2 Sundown. And install went fine, little trouble with the Line Out Convertor, but we worked through it. After it was all installed and setup good we started messing with tuning, and man this setup was POUNDING away on my BMW!! I mean for a 10 and the 125 to be hitting this hard was amazing. Cutting the story short i was driving home and had the music going nothing outrageous just listing to the radio. I get up this morning to do some final touches and noticed that my license plate had rattled off on my way home!!! I thought it was hilarious!!! Well that is my little plug/review of my new SSA/Sundown system!! Thanks.

First competition will be today. I'm entering with my Ssa icon 15s. Will let you guys know how they turned out. http://www.bassbattles.com/

I've been trying to decide what enclosure to build for my 1 12" D2 Icon. Like most members here I listen to all types of music, but personally lean heavily toward rock/metal. As a musician, I am plagued with a trained ear (good for recording, bad when analyzing car audio) so SQ is top priority. I had the Icon in a stuffed 1.15 sealed box powered by a Crossfire vr600 in the past. I loved everything about it (clean, accurate and smooth with tons of depth). Very toneful. I took the system out of the car last year and ended up giving the box away to a friend. I recently got the itch back and getting ready for the re-install. Seems like 99% of members here prefer ported which …

First video is rendering, we got a ton of footage down there on mulitple camera's, going to be putting a hand full of "win" video's together tonight. First up is the Team SSA Blazer owned By Justin a.k.a. "Jesus" Stay tuned.

Getting my new ICON here soon and was just wondering which route I should go for hooking it up. I have an Audioque 1200d amp, so its 1200w @ 1ohm and 870w @ 2ohm. I was planning on giving the sub the 1200w, but I'm wondering if I should go the 870w route. More or less, I'll be unpacking the sub, installing it, and then hitting the road for a long road trip... so its going to see a lot of use right out of the box. Would it still be ok to go with the 1200w, or is the 870w a safer route? Thanks!

The Wait is over. Just in time for our annual Black Friday SSALE. https://store.soundsolutionsaudio.com/subwoofers/soundsolutionsaudio/evil/ When your sub bass goal is nothing but supreme, unrestrained performance without compromise, the choice is the SSA Evil. The capabilities of the SSA Evil put it in very exclusive company at the zenith of the marketplace. This is where you look first for the ultimate 'ground pounder' that will not miss or muddy a note. Crisp and clean across the entire frequency range for those demanding outstanding linear performance thanks to an FEA optimized motor. Employing a massive triple stack motor, five sandwiched 10" progre…

All, I'm looking to run a pair of 12's in a sealed enclosure (1.00-1.25 ft^3 per) @ 600W RMS to each sub. Would I be losing any significant performance by under powering these subwoofers? I understand that they are rated for 750W RMS but I am limited to a total of 1200W RMS and would like to run 2-12s in a sealed enclosure due to my trunk-space limitations. Also, should these perform well in a relatively small sealed enclosure or is 1.0-1.25 FT^3 too little? What is the current lead time on the GCONS? Any insight would be greatly appreciated. Thanks in advance, SnapperKing

Would a pair tuned to 30hz give me a good amount of low end? Should I tune lower? Subs are going in the trunk of a 04 Ford Crown Victoria, port and subs rear firing. Would a 1500d running at .5 ohm be too much power for them or just right? Already have the amp, just took a notice to these subs recently and all the positive feedback on them. Any help or nudge in the right direction is greatly apperciated, thanks.

What's up guys. Looking to do this install in my 2000 Dodge Intrepid. Having figured out the exact box demensions but looking at somewhere around 2.2 cubes @ 32hz. What are you guys opinions and suggestions? Anything is appreciated! Thanks.

any requests for these? Do the icons in general compare to the Fi Q series?

Will be running it off a DLS A7 Sub channel at 2 ohm getting 440-500 watts. Can the 10 handle this in a 1.2cube ported box?

Hey fellas... I recently, I believe 2 days ago, wrote a review for the 12" Icon in the SSA store. I haven't seen it up on the site yet. It's just kind of embarrassing man.. Did my review get rejected or do you have like a week before processing/posting??? Just wondering since I have yet to see any owners review this woofer... Thanks -Danny

I sold my 18's to my friend to Don... and this is what he did with them.... It did a 47.7 in KAOS which is a 3 min run in the center of the dash. The enclosure is some thick ass PVC with MDF plugs and aeroports. Sadly besides myself and him we were the only ones to run SSA.

Is there a big difference in output of these in a sealed box (2.5-2.75cu) on about 750 watts?

I am looking for info about the Xcon subs. Can somebody give me some specs about the Xcon line? I need the weight of the 12 and 15" sub, and I can't find it. I want to compare it to the Icon line. Can we have a comparative description of the 2 12" and of the 2 15"? I have an Icon 15", and I love it! I loved its "light" weight too. But I can't tell for the Xcon, there are not a lot info on the SSA site. Thanks

@soundsolutionsaudio I mention it as more and more traffic is moving to Instagram and I am often posting a daily story video. So some of the most up to date stuff is going there now due to speed and convenience.

Hi everyone, I have a 15" Zcon in a CX-5 Mazda. The box is huge in the cargo area : no more room left for groceries ! 4 cu ft @ 33 Hz. I would like to try a new box with sub up AND port up. I feel like the port is too close to the tailgate, and it flex too much. How do you think a new box with port up will play ? Will I loose anything from that change ? Is it absolutely necessary to have a double baffle ? I like to flush mount the sub, and I don't want to use 3 baffles for the new box? Can it be good with good bracing only ? I will try 3.5 cu ft to have asmaller box. I need to take out the false stock floor to put a higher box an…

is there a 10" xcon??? or is it a mistake

Icon 12" sealed or a Icon 10" ported? Should have added, I meant in ideal boxes. Also, I would like to tune the box to 15-20hz since my amp does not have an SSF. I've got a blown 12" icon that i'll either fix or swap for a 10" and port. The 12" port box is just to big.