Sound Solutions Audio (SSA®)

Here's a video from this build. http://www.soundsolutionsaudio.com/forum/i...showtopic=26020 Enjoy

Has anyone purchased or done an install with a 10" xcon? If so can you post your feedback or info.

Just woundering if a 12" Dcon would work well in a home theater system. It would be in a seald box powered by a 250 watt Dayton plate amp. Andanother question, can you get the Dcon without the logo on the dustcap? Caus I want to go with a real clean look.

I'm looking at getting an AQ2200, now I don't think it is too much for the sub when it's broken in, but what about breaking it in? Just keep it low for a while? Thanks

I am thinking about buying a 12'' icon and was wondering about how much power they can handle daily? I currently have a sundown saz1500.1 and don't really want to change that. I no this is a sq oriented sub but i would be running it for spl, i no this sounds kinda dumb but i currently run a fi q. Does anyone have any numbers on a 12 or any icon?

I know the DCON's are rated at 300 RMS, what is the maximum RMS that I can run to them daily?

I've been drooling over getting an SSA for about 3 years now and finally pulled the trigger yesterday and got a 12" DCON. I have a subaru outback with 36" (I *think*) between the strut mounts and about 16" high. It can be as deep as needed and the seats also slant back a bit. My last pair of subs died because a friend slammed their bike into them so I'd like something that faced up or to the side. I'd like to go ported between 30 and 32. Anyone have any ideas on a shape I can use? I don't want this sub to succumb to the same fate as my last ones.

This review is a result of the SSA Dcon Give Away here on DIYMA. So, first I would like to thank Aaron & Mark of SSA for participating in the give-away and providing 2 free drivers to members of the community. Specifications for the driver can be found HERE. The cost for the driver once added to the cart in the shopping section of the SSA website is $165 plus shipping. As you can see from the below picture, the driver is single boxed with 4 foam pads glued to the sides of the box at the mounting ring and (not visible) foam padding underneath the motor structure with an inner cardboard "box" that surrounds the motor structure. The driver did shift slightly during s…

Hey i just got my 12" icon D1 in last week and i must say i like it! It's in a 2.2cuft box tuned to 32hz powered by a jbl gto1201.1(1100rms rated) with 0 gauge knu wiring. It slams the lows like crazy. My last setup was a pioneer 3004spl in a 1.75cube box tuned to 32hz. Now the icon is classified as a sq woofer but it blows the pioneer out of the water in both sq and spl. I love how i can turn down the gains and lpf if i want some smooth clean bass and then set my gains to 40hz @ -6db and have bass that literally rattles my rearview mirror right off. I am very impressed in my purchase and for 263 dollars shipped to my door with a sticker lol you can't go wrong. Al…

Im new to this site as you can probably tell and was interested in getting a pair of 12" icons. Im not a very crafty person so I was wanting to put these subs in a sealed box. My question is how do they sound sealed off about 1500 watts of power.

this truck is a new customers from AZ, I would say he's very pleased. I'm posting up his pics for him, and a short vid. These subs sounded unbelievable to my surprise in this prefab box. 2 12"D12 ICON's 1 Kicker ZX1500.1 1 S10 Blazer

As a daily driver which one would sound better? looking for SQ not soo much as SPL. oh powered by sundown saz-1000. any positive feed back would be great.

If I have the sub in a 1.5 net cb ft sealed box. At what wattage does it start to really get loud?

I have had my xcon going on 4 years in a large ported box (2.7ish tuned to 30hz) running off a ED 9.1 and been away from this site awhile too. So I was wondering has anyone put the xcon in one of these types of enclosures and if so wht were the results?

Anybody know what the mounting depth is on a 12" XCON? Can't seem to find it anywhere.

according to specs xcon has more xmax, low fs and more power handling. In terms of SQ how would they compare?

We slapped my old crx/suv (shop box) style box in Sound=Vibrations car to see what it would meter. With under powered subs @ 34 hz it did a 142.7. Congrats Ernie!

any one want to see the video of the new ICONs doing a 149 in the kick?! Driver door open...

are the Icon series more spl setup? When are they coming back in stock? Which of the sundown amps would work better on a 15 the 1500 or 1000?

does anyone know if the icon will preform well in a 3 cu ft. ported box? 3 cubes is all i can fit in my CRX since i want to keep the sub covered. any input would be great

I have a couple of ?'s as I am new to ssa audio ..i have a 92 camaro and will be building a sealed box as i have always been more of a SQ guy ..1. does the icon preform well in a sealed box ...2. what are the ideal cubes for a sealed box ..im open for input so any good woofers that preform well in sealed box's feel free to throw your 2 cents in ..thanks guys ill put up some pics when i iron out all the loose ends should be fun with all of your help

Just wondering how could a xcon perform in a ht setup (movie 80% looking for low end ruble here) i was thinking big box low tuning like 6-7 ft/cu ported to 26-28hz, how would that model for my needs? thanks

I have a 2.7 cu.ft sealed box and I looking to buy a Alpine m500 mono amp(500w rms). Good choice for a 15" DCON, or too much power and little or too much box volume? No ported cause I don't have enough space.

I've been meaning to do this for a while but haven't had a chance yet. 15" Icon Home Sealed Lower power - 4-5.5 cubes Higher power - 2.5-3 cubes sealed Home Ported Music - 4 cubes tuned to 30 Hz Home Theatre - 5 cubes tuned to 20 Hz (can tune lower if wanted) Vehicle Sealed 2-2.5 cubes sealed Vehicle Ported 3.5-4 cubes tuned anywhere from 28-35 Hz Any of those should work just fine. It's very important that you match your enclosure to your application. If you do so, you'll be very happy.