Sound Solutions Audio (SSA®)

Would a 6" psp areo port be enough for a pair of Icon 12s? Had a idea and was just curious and needing a lil input, thanks.

My Daughter was born yesterday, i didnt realise what i was wearing til i looked at the pics i took a few mins ago. I was Sporting in the Operating Room and all through the maternity ward.

can they be used in a sealed box? if so do they have good sound quality? would one 10 beable to handle the power from a kicker zx1000.1 with a birthsheet of 1156w?

I have a customer that wants to use either of subwoofers mentioned for a silverado install. Which ever model is used is dependent upon which subwoofer will fit given the design of the enclosure and the customer has already told me he has tired to obtain the same information with no response.

3 12" icons in a sealed 4.5 cube sealed box 3000 watts anyone have feedback. an idea ive been thinkin it may be my new setup

I have a couple of ?'s as I am new to ssa audio ..i have a 92 camaro and will be building a sealed box as i have always been more of a SQ guy ..1. does the icon preform well in a sealed box ...2. what are the ideal cubes for a sealed box ..im open for input so any good woofers that preform well in sealed box's feel free to throw your 2 cents in ..thanks guys ill put up some pics when i iron out all the loose ends should be fun with all of your help

I've heard that the SSA ICON 15 and Fi Q15 are very similar in SQ and output. I want to purchase either of the two subs but am not sure which to choose. I want a sub that has very deep, low bass, and gets loud with good SQ. Does anyone know if any of the two is better than the other???

I am thinking about getting an Icon 15 but I have some questions. I currently have a Diamond D3 15 and an AQ1200D. I will be using this amp which I know should be fine but I would like to use my existing box. The box I have is from audio enhancers and its 4cubes tuned to around 32hz I believe. It is the model designed for Diamonds though and would like to know if it will work. This will be going in my 03 Blazer.

I saw denalilvr posted something about SSA releasing a new driver specificly designed for a daily setup.. if anyone has any info please shoot me a PM or email me

I finally installed my icon 15 in my truck. I had tried it in a friends box but today i put it in the console box I built. It bis 3.75 cubes tuned to 32 hz. I LOVE IT!!! It flexes my roof and all four windows and still sounds very clean. Just wanted to thank everyone for talking me into getting it instead of the kicker L7. Also thanks to SSA for making an incredible sub.

Here's some fun Johnecon2001 & I had tonight taking all new product photos of the new white dust caps. Ton's of more photo's to follow, including an updated ICON website.

I finally put in my Icon 15. It's in 3.5 cubes tuned to 34 hz and it is loud as fvck and sounds clean to boot! The funny part is it isn't even broken in.

just a feeler as to what everone is running their 15's as far as box and power.im going run one with 1000w at 2ohm.i see the rec. box range between 3.5 and 4 for optimum 27 -33hz. i have the space ,would i get noticeable differance . how does 4cbs at 30hz sound any feedback is good.

I'll add comments when dinners finished

just ordered the 15" icon amp package and i need help with a ported box tuned to 32 design (im going to try to make my 1st box with my friends help:P) thanks

Here's the skeleton of the new site, video that streams will be completely different once it's done, still working on it. http://www.soundsolutionsaudio.com/products/icon_new/ opinions needed.

Im new to this site as you can probably tell and was interested in getting a pair of 12" icons. Im not a very crafty person so I was wanting to put these subs in a sealed box. My question is how do they sound sealed off about 1500 watts of power.

Here are the T/S Parameters we promised: ICON 10" SUBWOOFER DUAL 2 OHM COILS Re 1.5 per coil (specs measure in series 3.0) Fs 30.7 Qms 5.60 Qes .41 Qts .38 Mms 190 g Sd 310 cm^2 Vas 19.1 l Bl 16.4 Spl 83.1 1W/1m Xmax 20.5mm Wattage: 1000RMS Displacement: 0.12cuft ----------------------------- ICON 12" SUBWOOFER DUAL 2 OHM COILS Re 1.5 per coil (specs measure in series 3.0) Fs 29.9 Qms 5.87 Qes .45 Qts .42 Mms 212 g Sd 480 cm^2 Vas 43.7 l Bl 16.4 Spl 86.0 1W/1m Xmax 20.5mm Wattage: 1000RMS Displacement: 0.16cuft ---------------------------- ICON 15" SUBWOOFER DUAL 2 OHM COILS Re 1.5 per coil (specs measure in series 3.0) Fs 26.4 Qms…

Thank you to ANT for purchasing and donating the driver for test! This image has been resized. Click this bar to view the full image. The original image is sized 1022x680. My first impression upon receiving this sub was that finally, someone came out with a reasonably sized design. Unremarkable in appearance compared to the latest drivers, nonetheless all the hallmarks of a high end driver are present. Large progressive roll spider, large 4 layer voice coil, aluminum former, cast aluminum basket, venting under the spider, and a massive pole vent in the rear. A nice added touch is the tinsel leads appear to be covered in a non-conductive braiding. May I also add, thi…

http://www.soundsolutionsaudio.com/forum/i...showtopic=14993 Link

i have a 2005 civic 4 door. 1kw to play with and enough space for 4 cubes in the trunk. i just bought a icon 12 and want to make up an enclosure for it. i want it to be loud to the ears and still sound good and flat. what would you guys recommend?

got it a couple days ago but my camera batteries died off

building a project for a show in a few weeks. 7.854ft^3 after displacement 268in^2 of port tuned @ 47hz

[teamssaudio]JN2urDUqHnTpPZQZgUv0.flv[/teamssaudio]

First thing I will make abundantly clear: most people by now know that I’m a regular poster on SSA and a member of the Tech Team. Aaron did not send this to me to review, I didn’t get it for free, I wasn’t asked to buy it, or any situation in that vein. When I expressed interest in getting an Icon, Aaron asked if I would be willing to review it. I said yes but made sure he understood that if it was a sub-par product, I wouldn’t hold anything back. I feel I have the technical backing and experience to give it a thorough review and I hope you’ll find the same. There were no SPL measurements done because I could really care less about those. This is a purely subjective…