Sound Solutions Audio (SSA®)

My Daughter was born yesterday, i didnt realise what i was wearing til i looked at the pics i took a few mins ago. I was Sporting in the Operating Room and all through the maternity ward.

I finally put in my Icon 15. It's in 3.5 cubes tuned to 34 hz and it is loud as fvck and sounds clean to boot! The funny part is it isn't even broken in.

just a feeler as to what everone is running their 15's as far as box and power.im going run one with 1000w at 2ohm.i see the rec. box range between 3.5 and 4 for optimum 27 -33hz. i have the space ,would i get noticeable differance . how does 4cbs at 30hz sound any feedback is good.

I am extremely interested in buying a ssa icon 15 but I am concerned because my amp puts out 1500 wrms @ 1 ohm. Will the icon hold up to that kinda power?

Im new to this site as you can probably tell and was interested in getting a pair of 12" icons. Im not a very crafty person so I was wanting to put these subs in a sealed box. My question is how do they sound sealed off about 1500 watts of power.

Thank you to ANT for purchasing and donating the driver for test! This image has been resized. Click this bar to view the full image. The original image is sized 1022x680. My first impression upon receiving this sub was that finally, someone came out with a reasonably sized design. Unremarkable in appearance compared to the latest drivers, nonetheless all the hallmarks of a high end driver are present. Large progressive roll spider, large 4 layer voice coil, aluminum former, cast aluminum basket, venting under the spider, and a massive pole vent in the rear. A nice added touch is the tinsel leads appear to be covered in a non-conductive braiding. May I also add, thi…

Here's the skeleton of the new site, video that streams will be completely different once it's done, still working on it. http://www.soundsolutionsaudio.com/products/icon_new/ opinions needed.

Here's some fun Johnecon2001 & I had tonight taking all new product photos of the new white dust caps. Ton's of more photo's to follow, including an updated ICON website.

http://www.soundsolutionsaudio.com/forum/i...showtopic=14993 Link

i have a 2005 civic 4 door. 1kw to play with and enough space for 4 cubes in the trunk. i just bought a icon 12 and want to make up an enclosure for it. i want it to be loud to the ears and still sound good and flat. what would you guys recommend?

got it a couple days ago but my camera batteries died off

I'll add comments when dinners finished

got an atomic 5000.1 thinking 4 of them walled off in a 98 blazer.what do yall think?

building a project for a show in a few weeks. 7.854ft^3 after displacement 268in^2 of port tuned @ 47hz

[teamssaudio]JN2urDUqHnTpPZQZgUv0.flv[/teamssaudio]

John stopped by and we took a few vids of some unsuspecting people [teamssaudio]pqUvyaNQm0LTIwgwY2fT.flv[/teamssaudio]

Well I just got my box today. Here is my whole setup so far. NEW PICS ON PAGE 2! All kicker wiring JL e6450 amp Soundstream pca2000d amp Boston acoustic sl60 components in the front infinity kappa 6x8 coaxials in the rears And my 2 NEW ICONS! There wired to 2 ohm so there getting 750 a piece on the amp

I'm posting a few pics from this build for a friend of mine that drives for aliving. He wanted some serious bass in the truck so i provided him with the subs. A local shop in Northern NY did the install, here's a few pics of it. Head Unit: Pioneer AVIC-N3 speakers: RF power 6.5 components Subs: SSA ICON 15D1s Amp: RF T20001, RFT 4channel

I am thinking about buying a 12'' icon and was wondering about how much power they can handle daily? I currently have a sundown saz1500.1 and don't really want to change that. I no this is a sq oriented sub but i would be running it for spl, i no this sounds kinda dumb but i currently run a fi q. Does anyone have any numbers on a 12 or any icon?

Hey, my enclosure is 2.2 cubes and tuned to 32hz for the 12" icon, but that feeling of upgradeing is kicking in. Instead of selling it, I want to make some more enclosures for it to keep me occupied. I need a few plans...so what volume and tunning would you recommend. Give me some ideas...

I don't know if its my settings on my headunit or if it's my songs format (data and mp3) but i'm starting to notice most of my songs sound like crap. I set my gains with my volt meter and the low pass is set around 80hz and no bass boost. My enclosure is 2.2 cubes tuned to 32hz and i'm thinking maybe its too big? One song I noticed it bottomed out and I set my gains to volume 52 with a -4db 40 or 50hz test tone I believe, I was only playing the song around 34-38. I can turn down my eq on my headunit but then my frontstage midbass is not even being used. Do I need an external equalizer? and smaller box since it bottomed out? I mean the song Young Jezzy "You know what …

Just got back from the AZ Sound USACI show. Got first in my class, I thought that score was respectable, but..... Next weeks show i'm adding a audio control line driver and gonna tweak a few things see if this daily driver set up can break into the 150's...anyways, here's a few pics of the score...

this guy wants to build a box for my two ICON 15" subs here are the 3 options he gave me 17"H x 42"W x 24"D, 8.174^3ft gross vol. Slot port, 15.5" x 5" x 15.92"Long. After all displacement, 7.048^3ft net box vol. Built from 3/4"UL-MDF 20"H x 40"W x 21"D, this will save you some room, it will put the enclosure at 8.244^3ft gross vol, 7.171^3ft net. Perfect! The port will be 18.5" x 4" x 16.1"Long 22"H x 42"W x 20"D, 8.889^3ft gross, 7.837^3ft net, with a 20.5" x 4" x 15.4"long port. i drive a 04 ford explorer also and dont want to lose to much space in the trunk

hey guys i am going to order a 15" Icon but im not sure what voice coil i should get to get a 2 ohm load on my amp. also when i make my box would it be better if i put the sub on the left side and the port on the other, or should i put the sub in the middle and the port on the side? oh it will be a 3.8 cu box what should i port it too?