Sound Solutions Audio (SSA®)

this guy wants to build a box for my two ICON 15" subs here are the 3 options he gave me 17"H x 42"W x 24"D, 8.174^3ft gross vol. Slot port, 15.5" x 5" x 15.92"Long. After all displacement, 7.048^3ft net box vol. Built from 3/4"UL-MDF 20"H x 40"W x 21"D, this will save you some room, it will put the enclosure at 8.244^3ft gross vol, 7.171^3ft net. Perfect! The port will be 18.5" x 4" x 16.1"Long 22"H x 42"W x 20"D, 8.889^3ft gross, 7.837^3ft net, with a 20.5" x 4" x 15.4"long port. i drive a 04 ford explorer also and dont want to lose to much space in the trunk

So I don't have the programs required to design a superb box, so I was hoping for some help, even if it requires some sort of payment, because it seems like an intense build to me. I am going with 2 18 inch XCONs and will use a SAZ-3500d. It will be the toughest build I have done due to the size and I want it to turn out great because I have decided to use a theme. I have been deciding on subs and amps forever it seems, so I said why not just represent the forum that has helped me through all of my indecisiveness and taught me so much (tears lol). I want to paint it in a color scheme to match my school colors, so red and white, probably with the emblem on one side, an…

Back in Oct. 2010 I had a box designed for an 10" Icon at that time which I became pretty busy and never got a chance to buld it or buy the sub. Since then I've noticed the Icons been revised, I'm wondering if I should get a new box designed or if the new icons are pretty much the same as the old icon specs that the design I have will be fine??

Alright so I just got everything I need for my install, for the most part. Equipment as follows... Alpine 7897 FantomFace HU SSA Icon 10 d2 Sundown SAE-1200D Soundstream 5.25 Edge Comps Alpine MRP-F250 1/0 + all other wires It is going in a Buick LeSabre, so box size is not a problem and I am aware that the optimal box size is 1.35 ft^3 tuned at 27-33 hz. This is just a daily driver and I just wanted a good sounding system with the potential to get loud so I think what i have is pretty well suited for my expectations. I listen to mostly rap/hip hop, and occasionally classic rock and alternative type music, but rap for the majority. Should I stick to 1.35 cu ft or does an…

How Large Should An Enclosure For An SSA Icon 10" Be Ported? The Port Area Would Be Nice, Too. Around 14 For Each Cubic Foot? Doing A Build For My Dad's 2001 Jeep Wrangler TJ. Thanks. ------------ Cody Johnson.

Can someone help me out an give me some measurments for my sub. Pefer a slot port box. Truck is a 08 supercrew f150 an amp is kicker 750. Thanks!

What are the specs for a ported 15 ICON ? Its going in a jeep Liberty.

Brand new site, including tons of social media upgrades, faster load times, better SEO options (for us), & a sleek new look. and the new sites color scheme matches the forum perfect! http://www.soundsolutionsaudio.com/ We now have a sweet new download section, in here we can add what ever we like, so as you guys think of some cool things to make available, the sky's the limit. (besides copyrighted material, IE, MP3's, etc...) Enjoy

I just received my DCON(phenomenal driver) last week and be playing it for about 3 days now. Just wondering what's the recommended break in time for it.

hey all my name is Andrew and im new here. i recently purchased a 12'' ssa icon d2 and a us amps xt1600.2. i am looking to build a box for it and had some questions...i am using the re audio box calculator and am looking for a tuning frequency of around 27-30hz. i have been messing around with the calculator and came up with a box that is 28'' wide, 14'' tall, and 18'' deep. port width is 2'' and the 1st port length is 15.25''. the 2nd port length is 8''. the overall ft^3 is 2.763 and the tuning is 27.98hz. does this sound like an ok design? i have heard that a port width of 2'' could possibly cause some port noise? also i was wondering if it mattered where i moun…

Do you build the subwoofer when the customers buys one or do you have then in stock most of the time?

i have been doing alot of reading about subs latley.. i am wanting to get a new 15 and have decided on the Xcon 15 with dual 2 ohm.. i have a alpine type r 15 right now.. i should be ordering it next week.. i have a few qustions... does it take a week to build it ? ( really doesn't matter, just wonder ) ... and where are you located ? what state ? one more... i have a hifonics brutus 1200 mono sub amp.. will this be enough for the Xcon ? i have a ford f-150 fx4 super crew it will be going in... .. i built the box for the type r in my truck, but i palin on a building a new box alot like my old one. except this one will go over my rear seat more like a conse…

Bromo, I am having a terrible time figuring out this CD player. I have had 15 different cd players. Alpine 7998, Eclipse CD8454, etc, etc. This one is by far the hardest to figure out. I know there is a switch on the side to access pro mode. Either way I switch it, all of the controls stay the same. I cannot find out how to turn on or off the internal amplifier. I cannot find the 3 Way Active Crossover. I cannot find the LED lighting options. Basically there is a lot of stuff I cannot get access to. I have read the manual. It just says to use the multi control to access everything, and this is not working. I know you are already giving me a hand on the enclosur…

LIKE THE TITLE SAYS

I'd like to pick up a 15" icon. The box would be sealed, but to shallow to mount the sub. I have the room to do inverted. Is that an option? Will it have a negative affect on the subs performance?

I've got a 12" Icon currently and I love the sub, but now I want to go bigger. Im doubtful that you guys have an 18" recone but I figured I'd ask.

I have heard here and there about the real world power handling of the XCONS. I have already gotten one of my XCON 18s, just waiting to order the other one. The amp i have is a Hifonics XXV Colossus. Was planning on selling the amp and getting the SAZ-3500, but didnt happen. So now I already have the dual 1 ohm subs, how do you think they will handle the Colossus rated 3200X1 @ 2 ohms, 1 amp on each sub? The box is 5.5 cu.ft. each sub, tuned to 31hz. They look so damn good, dont wanna see em go up in smoke!!!

Or should I just go with two xcons or maybe even a zcon if they ever decide to release it.

Clay from TeamSSA just brought his friend down, and we did a direct swap out from some JLW3's in his sealed box. He plans on upgrading to a SAZ-2500 when they come into stock. Please visit his rides page and place your comments via facebook/twitter connect http://www.soundsolutionsaudio.com/index.php/rides/item/carlen-s-2007-f150.html

Hey everyone, I have changed my mind many times about my build that I will be doing in the future. I think I have finally decided for sure on what sub and amp I am going to run. My choice being a single 12" Xcon in a enclosure that seals off the trunk with the sub firing into the cabin. It will be powered by the new Megalith Zed Monoblock. My question is... Should I worry about much reinforcement in my enclosure with only a single 12" thats a lot of power compared to most retail subs that I have worked with in the past. Also, I want to run a ported enclosure, what would the optimal tuning be for electronica music? 32hz? 34hz maybe? Also if I'm running this Should…

Need your help kicking off the new comment system, anyone who has owned or heard one of our subs can do participate! You can also comment on the rides pages as well. anyone, any comment, I have it set to admin approval so all those youtube people need not apply. Sound Solution Audio - Quality Subwoofers - Car Audio Subwoofer - Car Stereo

We will be getting more testing video's from users vs termlab very soon...

I had my sub and box out of my car because I was moving and didn't want to damage it. It was just sitting on a table in my house, and I went to put it back in my car, and the cone is dented. I have no idea whether someone in my house pushed on it or how it happened. Regardless, will this have a impact on how the sub works? I can take a picture later and post it, its about a 3 inch diameter dent on a 10" icon. Also, is there anyway to pop it back out?

Congrats go out to all of team SSA for all of their hard work and dedication. We wanted to thank everyone who works hard to help get the SSA name out there through competing, words cannot describe how much we appreciate your hard work and love for the game. Next season we hope to win even more. Thanks again!

Can someone give the number to ssa so I can place my order for my subs..the number on the site is not working and pay pal is acting up