Ascendant Audio

Just showing a SMALL piece of whats gonna go into the new build. Thanks Scott And Brian!

looking for just one but if you have a set ill buy both.

I have a SPL-D 1500D powering a AA Havoc 12 in a box that is 2.2cuft and tuned to 32hz. It plays the low end immensly (<36hz) but on the 40hz+ it doesn't do so well. Amp settings are LPF at 63hz, subsonic approx 30hz. Voltage is good, always at 13v or above. Any advice ?

Bass Ballin will be in full effect at west coast nationals this year in Parker AZ! very excited to get everything on a roll! bring your syztemz and prepare to drop some bass! Any questions about the Bass Ballin Orginization please contact me www.bassballin.com Thanks, Mike http://wcnevents.com/

I am a dealer in Fort Smith Ar and im curious if anyone knows if ascendent has gone out of bussniness or just a shady bussiness. I have been tring to get my 6 subs back for 4 months now due to leads being to short on the assassin subs. At first they said they would not fix them, then said they would due to a manufacturing defect after further reveiw, but now they are not answering there phones, emails or returning calls from voicemails. If any one is having the same issues please post. This may put a spark under there butt. I've made this same post on Ascendants Facebook page to hopfully get a response and low and behold the post was deleted.....

Time to upgrade. Think I am going to do 2 SMD's now so the Mayhems need to go. Since this is a forum for Ascendant Audio I might as well let that be known here. The mayhems are Fing amazing, but as alot of people in the car audio field see....there is always louder. lol. That being said...whats the price on 2 18inch SMD's and where would a recommended place be to sell the 2 18 inch mayhems that I currently have?

does anyone have specs on the 1" tweets the are IDENTICAL to the Seas Neo's? or the 7" carbon fiber mids???

I recently got 2 of the new Havocs with the solid pole and improved cooling, and I must say these subs are AWESOME. I've owned the older model havocs before (2008) and these are much better! Each is powered by a RF T1500-1bdcp (1800+ rms) and they seem like they need more...LOL. Box is 11.85 after displacements tuned to 29hz. No vids yet be will have some soon

I am looking at the arsenals and chaos series subwoofers. The thing is I do not know what the prices are for the two mentioned subs. I am looking into 12's and 15's for both models, and based on the price I will be able to make the best decision on what is the best for the buck, since they are both high quality. The problem is that I have e-mailed AA twice requesting pricing info but have not heard back from them. I understand they are busy but it has been a week or so. I am pretty positive that I do not have a dealer in my area, but for those who might have some inside info my zip is 29369. All this being said what would be the best way to get in touch with them so I can…

Hi guys, here is an attached pic of the box i'll be soon going to get made, Using .75" MDF and .5" mdf for inner port walls. The box shape will remain unchanged, took many hours to decide the slot port for this. And new suggestions opinions are welcome.

Quick question, whch one of the AA drivers is the most musical? What would it be comparable to? Thanks!

2001 VW Lupo GTI. Kit list, Alpine 7998R (Old Skool Gem!) SPL Dynamics ICE-150.4 (Running mids/tweets active) 4x Ascendant Audio 7" carbon fibre Neo Mids 4x Ascendant Audio 1" tweets 2x SPL Dynamics ICE-3500D (1 per sub) 2x Ascendant Audio Mayhem 18" subs 3x XS Power D3100 Batteries 1x 180A Alt Fitted KW Variant 1s already and will be doing a complete retrim and new seats in this one.

Can the Mayhems be re-coned, preferably by Fi, to change the impedance? If so, is there a comparable re-cone available that would maintain the stock Mayhem power handling of 2500 rms? Thanks.

Im probably going to go with 2 18" avas for my next build. I was thinking about 10 cubes with a 28 hz tune. What do you guys think? Also how much port area do these subs like? Are they able to move a bunch of air? Also I will probably be running 750 rms to each. 1500 total

Doug is quite busy these days working as an electricial on a big jobsite (go figure) Doug as always shown up at Daytona SBNs over the last 20 years with a wild vehicle. 16 15's, 16 12's, 24 12's!!! Dougs been away from the SCENE for about 5-6 years "guess" but I've been chattin' wit him quite a bit! He is someone who has usually been sponsored. He and Mark used to work as installers at Jeff Blair's AUDIOMOTION of Altamonte Springs back in 1988-1994? I heard Jeff went on to become president of MTX Europe? (anybody know for sure?) Anywho, These guys were allways light tears ahead of their time. Back in 89-90 they showed up at the big sombrero (old Tampa Bucs Stad…

I have two 12in 06 Assassins. Was wondering if anyone had measurements to a sealed box for both. thanks

As per title, is there any AA branded clothes?? If yes any link on where to buy them?? Cheers

Wanting to put a 18" sub in car. I've run into a 18" mayham, but trunk not big enough for the required space to perform. Any inputs on what amp would push this sub, I read the rms is 1250. Trying to finally complete my system.

..and it didn't break..

Looking for some ideas on building a box for my new mayhem 18 that should be here sometime this week. It is going in a 2002 pontiac grand prix 4 door. I can put it in the trunk or I can do a wall if thats whats needed. Just not sure on size and tuning for it.

Well, I just finished the build for my 15" Havoc. It's 2.6 cubes sealed. I am giving it 1.2kw RMS @ 1 ohm via Cadence ZRS7000D. The car is a 2008 Dodge Charger R/T. I listen to a good mix of rap, rock, and some dnb and other electronica. The sealed box is not providing enough low end for me, so I'm going to build a ported set-up for it. Does anyone have recommendations on what volume and what to tune the port to for my listening tastes? I am capable of building a slot-port box myself. Also, volume is not really an issue, but I'd like to keep it at or under 5 cubes. Thanks.

As title states I am looking to take apart my havoc. Any idea how to do this?

Custom Prototype 12" Subwoofer - RE FI DD DC Audio TC - eBay (item 280541335179 end time Aug-28-10 00:47:29 PDT) Very interesting Ebay add claiming this is a AA prototype. Very good looking subwoofer. Somebody buy it and tell us how it sounds. lol

hey guys have 2 18" smd subs, have xtra cab f150,trying to do NW have 20d x 24h x 57w so i have 11cuft = 5.5 per sub,trying to get into the 50's but i cant seem to get there, any help appr.I have interchangeable port spl port 17x 13 thats the biggest i could fit, subs up on passenger port up on driver,double 13 ply birch all of box,running stetsom 7k2d 4xs power batts (2700's) 1 h/o alt ohio gen.4 runs 0 gauge 2 pwr 2grnd to the 3 batts in rear,should i just go for the wall? i'd get about 20 cu ft. SSNW1-2. ANY HELP THNKS

this is my max dimensions. Hearing Rock rap electronic classical music i can say that i hear all sort of music.