General Fi

Right now I have four JL Audio 10w3v2s in a 2.5 cf enclosure in my Suburban and I am looking to upgrade. My goal is good overall sound quality in my daily driver. Would you recommend 2 FI Q 12's or a single 15? I will be using one or two of my Tru Tech amps depending on which setup I go with. I am using Hybrid gear up front and would like to provide a good match. Thank you in advance for your time and help, John

box is sealed each sub gets 2.3qf will get 2nd sub soon.. or should i go with single box 4.3 qf and a single BL ?? i like my hair to shake its relaxing.. but was wondering if 2 fiq 15s will sound louder and clean bass vs 1 15bl on 4.3qf.. i have a pretty good front stage.

the search function doesn't like it when i search for anything about the Q's and i searched backa couple pages and didn't find what i was looking for. anyways, i'm considering upgrading to a second Q. and i have 2 questions. i would rather not half to upgrade my alt, seeing as i just got a brand new stock alt put in 2 days ago cause my old one completely went out. and i can't return it now that it's in.. (and i don'th ave money now.) so i want to know if my current SAE will be enough for 2 Fi Q's? and i know it'll power them, and probably be just fine. but what i'm asking is will it be worth upgrading to a 1500? i would go 2000 but i'd rather not have to upgrade my electr…

Hi everyone, i just came across 2 fi Q's. I was wondering if anyone had any suggestions on an amp for them, its gotta be around 2000w rms @ 1 ohm. I found a Hifonics Hercules which is 2000W @ 1 ohm but i was wondering if there were any better choices.

Hi, a friend of mine is intererested in 2 Fi Q15s for his Peugeot 106. He has around 5ft

I am looking at getting 2 Fi ssd 12's. i currently have an audiopipe amp that pushes 1500 rms @ 1 ohm. would this amp work for my new subs? and if so should i get the dual 1 ohm or the dual 2 ohm?

Id like to say hi to every one since i am new to the forum. I am considering buying 2 Fi SSD 12" and i was wondering which amp would be the best for these subs. Also which gauge wiring would be best and any other things i would need to get the best performance out of these subs.

I am trying to run 2 fi ssd's in my truck at 2 ohms... i would like to find an amp that is 2000 rms at 2 ohms... would like something cheap working on a budget here.. any suggestions?

man sorry i forgot to include the Fi forum in my announcement of a few new vids.....im not used to coming around here too much but ill try to come around more. Its hard to keep up as you guys probably understand "Sactown Car audio" and "Tapout" are the latest......the Sactown one having some decent Excurt' on the subs.... scroll to the bottom.......theres 75 or more vids total http://www.stevemeadedesigns.com/index.php...3&Itemid=42

http://www.stevemeadedesigns.com/index.php...3&Itemid=42 vids at the very bottom with the other newer ones.

a couple videos i took of a guy with the screenname "headshok" from my forums. He lives in Singapore........he came all the way to Nor Cal to check out the Tahoe for himself. i gave him a ride in the Hoe and the Civic... Very friendly, funny guy....... The Tahoe demo The Civic demo my admin wasnt awake when i finished editing the vids so Youtube will have to do until i get it on my video page......no problem though these vids get the point across

Right now I have a pair of Q 15's in an 8.0CuFt enclosure, after all displacement. Tuned to 30 Hz. I was thinking about doing 4 X 12's in about 8Cuft enclosure tuned to 32 Hz. Power wise, it would be easier on my electrical. But my question is, would the response be there? Would the X's play sloppy? I'm happy with the Q's but I want a little more output (SPL). And I'm sure like alot of you, I like to change things up. Right now my Q's are powered off a PA A3000db at 1 ohm. The x's would be at 2 ohm. Just to throw this out there..I have 2 PA A3000db's if that helps you with your suggestions. Suggestions please?

The tdx is the one done by you guys. wondering if you have the correct coils yet? Dual 2 ohm? and the tdx i would like to set up with dual spiders and any options if avbailable. sent an email as well. thx. SSG Douglas Sands.

hey guys. I've got a 2000 firebird trans am that is in need of some extra bump. I currently have 1 Resonant Engineering SX 15" in a 5.5 cu ft box at 33hz in my Yukon and it sounds amazing on music and tones. I'm wanting to do the 2 10" stealth enclosures that fit into the rear pockets of the firebird. Here's what I mean... http://www.subthump.com/acamarostealth.htm I was wondering about the SSD 10's. Do you think they would be nice for this enclosure? I know the minimum sealed enclosure is actually 0.6 cu ft. With displacenemt, I'm assuming the final volume of the box will be around 0.4-0.5 cu ft. Is this too small for this driver? What other 10" woofer would you recommen…

Chris has set the bar so my turn Vehicle info - Vehicle - Scion tC hatchback 2007 - Power - Stock Battery, Stock 100 amp Alt, Optima yellow top 34/78 In the rear System info - Sub woofers - 2x Fi 12" SSD D2 with copper coil option - Amps - 2x US Amps MD.1D (RMS 1,000 watts avg. @ 13.6 V each sub @ 1ohm) ~Also tested with 2 soundstream rubicon 502 amps (RMS 500 watts avg. @ 14.4 v @ 4ohm) Enclosure info - Enclosure - Currently 1.05 cubic feet per sub (after all displacement) Also Sealed enclosures used were 1.2 per sub and a ported 2.0 @ 33hz sloted - Sub placement - Facing UP in the rear hatch Also tried facing REAR of hatch Comparison info …

Its been 2 weeks sense i bought my sub and i still haven't got a email or anything so i was wondering if everything was ok. My name is Kasey Cavyell.

Ok, so I am going infinite baffle in my e28 and have a pair of Fi X 12's. Does anyone know how well they may perform in tis type of setup? Just a little info, stock the trunk is sealed from the cabin in an e28 BMW and therefore it is good for this type of setup. I will mount the subs on the rear deck. I am definitely an SQ guy so lower spl is fine with me. However, I cannot go bigger than 12" because there is only 13" of rear deck space. I would have to cut the wall all up just to get some air moving into the cabin in a regular box setup anyway. Any tips, questions, info is appreciated.

im looking to change my setup. if i go the bl route, my box cuft will be 5-5.4cuft total including port area. if i go btl route, the box will be about the same total. they will be powered by a zx2500 which in the birth certificate says 2700 (if that matters) now i want to know which will be louder. this will be for daily use in my dodge charger. i currently have 2-15" L7's sealed in a 4.2cuft box and it pounds, but i just want to change it up. plus, i have a feeling that i can get louder than it if i go the FI route. thanx im also open to other suggestions.

Here is my vid of my 2 RE sx that scott reconed... Scott did some custom work added a pole chamber and cooling to my sub.. also the btl tinsels... Well the box specs are 9 cu before sub and port displacement... 7 cu @ 35hz after sub and port displacement.. Thanks again FI CAR AUDIO... Scott ill get in touch with you about the recones for my mt's

hey, i have a destjl built E15k (with the boob cone and blue e), and i spoke to nick via email a few months ago about a recone. I am just wondering if these would basically be arsenal parts, and how the sub would compare to the original. The e15k and the 15 arsenal have similar specs, xmax, and box requirements, so i figure this would be a good match. Just curious, and i may find out what that would cost if this is a good match. thanks brian

Does FI stock 2.5" coil re-cones? Specs on the coils? Might need a bunch of em

I ordered my IB315's through Fi's website. The ordering process was very easy to navigate. I had contacted Fi Audio one time after ordering and I received a response within six hours. My subs were shipped by FedEx. They arrived at my doorstep efficiently packaged and unharmed. The subs have no scratches, paint chips, excess glue or any other abnormality. The build quality looks excellent without having any extra unneeded cosmetics.

could a bl 18 with just cooling handle a saz 2000d? my buddies wantin to get the 2000d but he dont have flatwind so he mite get the 1500d.

heres a little clip so you know what im working with, ill have outside pics of the caddy if you guys havent already seen it in the background of my other installs collecting dust .........project is started!! so far it will consist of 8 18" subs and the MIGHTY ROCKFORD T15K! This project might take a while since there is so much to do but here are some new progress pics. heres what WAS in it....

I am currently beginning an installation for my 2002 Ranger super cab. I will be running two BTL 12's in this install. I would like some opinions on this setup. Some people may think im crazy for putting this into a small space. But I live by the rule get loud or go home. Let me know what you all think about how this will turn out and how hard it will be hitting.