General Fi

Loaded BL, ~1900 watts, umm wtf how this happen? And how do I fix it?

Hello to ya all.. Just wanted to introduce myself- my name is Jarvis and I'm 17 years old. I am from state of Indiana, and i own a 95 Ford Explorer.. A member from forums mainly about explorers introduced me to this forum.. which i found many cool stuffs and helpful informations.. I am very interested in buying a Fi subwoofer anytime soon.. I m currently saving money for the sub, shouldnt be too long since I got a job.. I just got some questions before i can ask more questions.. I just want to ask the question to people who has experience with Fi.. I am debating on which to get- a 15 inch Q or a 15 inch BL? I know that Q is provided as is while BL has some options, bu…

checklist... stock Toyota 60 amp alt optima yellow top orion 2500d 4.72cuft net @ 34hz 5"x14" port area 1 15"BTL loaded. box is built to keep me in stock class, below windows, yada yada.etc. results.........AMAZING!!!!!!! as far as SQ, speaker is stunning, especially for an spl sub. low end is awsome also. will have legal scores and kack panel outlaw scores sometime saturday, Port wars number at last comp was 159.9 littlematt has videos of both my btl and his 12Q. my 15 let me know if you think my truck flexs a lil bit.. o yeah all panels a triple linned with sound deadner....roof, cab floor, everything!!!!!!

Right now i have a Q15 and its hittin 143.3 and its in a 5 cuft box tuned to 40 htz and its just not loud enough for me in my jeep grand cherokee. I want to buy something new i will have 2 Digital Audio DAD1504's which put out 1500 watts at 1 ohm and im not sure on what to buy cause my area for my box would be 19" in height 28" in depth 35" in width so if anyone has any ideas for 2 subs running 1500 a piece or 1 running 3000 daily im up for ideas i also thought about 2 fully loaded BL's running 1500 daily or one 15 fully loaded BTL running 3000 daily please respond with your opinion on each cause im lookin to hit around …

Invoice number: I-10425/00 I was wondering if this sub will be finished by the end of the week? I have a competition to go to on 4-22-2007. The reason I ask is I need to get this insatll done before the competition and work out any of the bugs that I might run into. Thanks

I have always prefered sealed systems. They always got loud enough, and were easy to build. I just got a D2 Cu voice coil SSD for the wifes car. I have it in a 1.3cuft net box. Approx 1000w available, but its not all being utilized. I feel like I am pushing the sub to its limits, but it's not as loud as it should be. The install is only 2 days old...will SSD's get louder as they break in, like other woofers? I know the alum coil can handle more power, and is peakier....but will it be louder? I think the next step will be a ported box.

Here is the system: Basic Kenwood deck (for now) feeding a US AMPS 6000. US AMPS 6000 feeding one BTL 15. For now, two runs of 0 gauge running back off a 250-300 amp alt feeding three Stinger 1700s. We want to do street beat under USACI rules which is pound the crap out of it for 30 seconds. The amp will not be ran at full tilt just so you guys know. I was wondering what kinda box you guys might recommend and should we get the fully loaded BTL or are there a few things we don't need. This will make for one of two FI systems being built this season and I will keep you all updated as the builds progress. If your interested the other is four FI BL 15s running off fou…

I'm looking to get a price quote for a recone for an Ascendant Audio Avalanche 12. Can anyone help me out?

This is a question I was curious about... I know there are recones for the btl. The question I have, is do they come as a kit (including glue, shims, etc.)? If not, what glue do you guys recommend for gluing the surround, and dustcap? Also, is there some type of special gap tool, or shim that you recommend for correctly centering the vc in the gap? thanks

i metered my new 12" Q last week and hit 139.6 on the dash. its powered by a orion xtr pro1000. I coulda turned it up more but i just wanted to see what it would do. somehow i got 1st place..maybe cuz there were only 3 other people in my class. one of these days im goin to see what it hits in the port cuz it pushes alot of air for just a 12. but yea its a beast and i havnt had any trouble at all with it. THANKS Fi heres some youtube videos of it

got my setup metered at a comp which is 2 12 ssds copper coils on 1500d scored a 140.4 and met a guy with 8 15 ssds cool guy and I believe he is on this forum as well can't remember his name on here. thanks scott for a great product.

just wondering what the current prices are for btl recone's. mainly the 12, but wouldn't mind seeing all the prices. Thanks

It's been a long time since I've been back to the FI forums. Good thing the registration only took all of 2 minutes to complete. I like the new layout too. Ok, first I'll describe what's in my 2004 Mustang: 1) Prototype 12" BTL standard (in a ported custom fiberglass enclosure 32hz) 2) Reconed 12" RE HC (I swap these out every 2 months maybe because I do get picky with sound quality sometimes) 3) RF P800.2 4) and pair of JL 5.25" coaxials on a small 60rms mtx amp Also just got some thick Kicker 1/0 gauge wire which I will be upgrading from 4gauge wire. After the rewiring, I'll be upgrading the amp to possibly the T20001bd or similar output amp. I will post up the pictures…

He wants to compete in local SPL comps, and recently switched from bahns to Vega V-Max. Personally I don't like how the V-max meter or sound, so I am trying to get him to switch to Fi. He is on a pretty tight budget, so I was thinking that the SSD's would be a good option for him to start with. Should the SSD's yield a noticable increase in SPL from the V-Max if they are in a proper box and and correct power?

Today I met a guy (goes buy oldschool on termpro) who does like 155.9 with two twelves in db drag. Well personally I wouldnt want to compete with him *street b* so i was looking at doing a street a setup but i have heard that the 10" btl's are not musical that they are just for burps only. So a few questions: 1> How musical are they??? 2> How much power can they handle??? (looking @ 2000 watts right now) 3>Would doing one 12, or 3 8" be better???

lookin at buying a new vehicle and im wondering what the best vehicle would be for 2 18" BTL's ?? iwas thinkin Grand cherokee but i dont think theres enough room, what vehicles do you suggest i check out?

Does anyone know how i get a recone kit for my SX? My buddy talked to someone on here and they said it was possible to recone it as an Fi. Im jus wondering how I go about getting one.

Hey guys I was emailing with Nick about a recone for my SE to a sexxx 15. I'm not sure if my latest emails are going through because my site and my host have been fouling up lately. If they have and you are just busy sorry for sending them twice email is josh @teamzx2.com -Josh

Sign In for anyone checking out FI from elders to newbies or newbie elders like myself. Let us know if you work for FI any affiliation, have FI products, or what you want from FI Before I drop my own name I must give an elders first so I think the guy who earns that spot is Steave Meade and if you havn't checked out his site do it. www.*****.com Obviously he is an FI fan and Reppin that chit hard. My name is "Joe Rod" and I'll be ordering 418's in the next week or two. Havn't decided on the SSD's or BL's yet but they will be in a bandpass enclosure of an 88 S10 Blazer Let us know who else is out their …

Just wanted to say thanks for taking my call the other night. I know you were at SBN. The 12" MT recone worked well and is taking a beating. Thanks again! Justin Tillery

P Chamfer: no Cooling: yes 3rdMagnet:yes HiXmCoil: yes daily:yes Universal:No are those good options for daily driving but serious spl

I am gettin a 18 inch btl soon gonna get 2 in the mean time im gonna be pumping 4000 watts rms at it with the memphis 4kw could it handle that on a daily basses

why cant i post pics? Sorry, dynamic pages in the tags are not allowed whats that supposed to mean?

Will 2 6" Aeros be enough or should i do 3? The external dimensions of the box are 48.5W x 20D x 16H. Looking to tune to around 33hz or so. Help me out here guys need to order the ports from PSP-INC pretty Soon.

How do I get the shirts and stickers somebody please tell me I havent been on this forum in a while and last time i checked they didnt have any yet.