General Fi

Well i got rear ended the other day. And when I got hit, my subs slid backwards and into my amp rack. Luckily the only damage was a pretty effed up dustcap. its got some nasty cracks in it, and a hole about an inch in diameter. For now, I just slapped some good ol duct tape on it, But these are almost brand new and id like to keep em looking that way. I emailed Fi and they can send me a new dustcap, But I wouldnt know where to start in the replacement process. So if anyone can tell me how to go about replacing the dust cap, I would greatly appreciate it!

Are there any issues right now with reconing IB3's? My 18" IB3 was delivered to Fi car audio 10/19/2010.

Finished up all SSD back orders today..everybody should have tracking information and it will say in transit by around midnight PST tonight! Thanks for your patience!

I just ordered a couple of subs, order number I-15226/00 . I need to change both subs to DUAL 2 coils. I made a mistake in the order process. I tried calling the number, but I got some sort of spanish voicemail? Thanks!

Ive been contemplating this recently and was wondering how the Fi would do in home audio? I am considering a a IB or a Q but then again I have a spare BL just sitting here. Which would work best and how well will they really perform. Lets be honest here I want loud and good sounding in my car but for home use I am more focused on SQ then breaking things. Thanks

Sorry in advance for what sounds like a book but i am not happy in the progress of the install....Here it is old school Eclipse competition cd player 3 sets of RE audio 6 1/2 components pushed by a US AMP md-43 4 channel....2 18in FI BTLS in a 6cuft box (ea) after displacement being pushed by 2 US AMPS md-3d rated at 2000rms @ 1ohm @14.4volts....I also have a 300amp alt big 3 done 5 optima batteries (looking to get XS POWER) and all 0 gauge wire.....Stinger volt meter that is ran to the sub at is ranging 14.7 to 14.0 (i know voltage drop isnt good im getting another 300 amp alt soon) It is loud and hits pretty hard (broke weld in tailgate that holds the handle so kno…

The customer service is horrible first off they dont have a working phone number 2nd they dont reply to any emails that you send im thinking about canceling my order getting my money back and orderin dc subs

i just order 1 more fi btl 12 but not sure if it will fit. my trunk is long enough at 44 inchs width is the issue, at the tail end of my trunk it measures 57 inch in width for 23 inches in length then then the width narrows down to 32 inches width. i need help.. the height of my current box with 1 btl is 15 inch

I have been reading plenty of posts and articles of sound quality, yet many people have different opinions on what a sound quality setup is. I have 3 Rockford Fosgate p2s sealed however, it is not loud enough. I am going to buy either a 15" Fi Q fully loaded or 15" Fi BL fully loaded. Both would be ported and in their proper enclosures with about 1200-1300 rms power running to them in a 2007 hyundai elantra gls.(I have enough trunk space) I have equipped my entire car with dynamat because I like to feel my bass more than others. I just don't want my sub to change the sound of my music when it gets louder. What does SQ truly mean? Does having a ported box mean I don't want…

It can't possibly work

Ok, so iv decided with my price budget that it would be best to get one 18" Fi BTL. The only problem with that is I have a 2004 Impala, and the recommended box cutout is a little too big. It says the height should be 22.5" but i only have room for around 19" max. Would those couple of inches really be that big of a deal? or do you have other suggestions on how i should build my box? I have plenty of room for Width and Depth, its only the height that seems to be an issue.

If I have 4 BTL N218's with 2 amps with 3500rms will the amps blow the subs? Because the subs have 2000rms?

Friend of mind is looking hard at ordering a single 12" Q (dual 2 ohm) and running them on Leviathan in a sealed enclosure. He wants to run channel 5 & 6 on the Zed at 2 ohm giving the Q 500watts. Should he order any of the options (apart from high qts) or will just a plain Fi Q be enough? He's running a set of MLK's up front in his 2007 Caddy CTS Suggestions? Thanks

I am looking for some votes to try and win this contest so I can get a few bigger amps for my BTL's. Please vote for me Justin Wilson #38 at http://www.rockfordfosgate.com/promotions/2010_WhatsYourVolume2.asp#vote Thanks for your time, Justin Wilson

i got a BL 18 with dual 1s and might be getting a sundown sax-1200D so do you think running it at .35 ohms is safe?

I am ordering 4 BTL N218's and was wondering what amp or amp's I should use with these speakers.

hey guys, hope you all had a good weekend ! right now my BL is facing the rear and box is only out of .5 mdf because its all i had at the moment, but now im planing on puttin another layer on the sides,front and and top. Will that help with deepness and loudness? I know it stops the box from flexing a bit but dont know what that does for sound. as for the box facing rear, im planing on turning it around and hopefully sealing it off by putting two cut outs on the sides (one on each) going straight across. To fill in the gaps, is gorilla tape good ?

Im hookinh up my BL that I got back in 2008, what Sundown amp do you guy recommend? SAZ-1000d SAZ-1200d SAZ-1500d or SAZ-2000d? thanks

I ordered last night on my iPhone and ordered btl12's instead of 15's . What should I do?

Really want an Fi hoodie but am always skeptical about buying clothes I can't try on first. Anybody know if the Fi hoodies run on the small or large side? Not sure whether to order a M or L...

Can I order some? Me and my friends want to rep for Fi and we need stickers for our cars..

We're going to start doing some fun stuff with the Fi Side Chat and on our Facebook page...add us and we'll update the page and get some stuff rolling. http://www.facebook.com/home.php?#!/pages/Fi-Car-Audio/163751923651416

Well..given the direction we are taking with the trying to re-iterate the importance of having manufacturing here in the states it reminded me of something I learned of in history class years ago. FDR was famous for his "Fireside Chat's" back in the days of nothing but a radio to talk to the people on a personal level...so this is what i want to do. I'll hop in the chat in the evenings when I have time if you want to shoot the breeze. I would rather not to get into a technical debate or an enclosure Q&A as well we have the forum for that. But if you'd like to come in and shoot the breeze go for it. I'm in there now for those who have never been in, it is at the top of…

hey guys about what size hole do i gotta cut out for the BL 18?

Runnin an AQ2200d, Alpine 9584 head unit, tuned in a 2.2 Cubic foot box to 31 htz. The clicking noise only occurs on a sudden knock of bass & Is repetitive in fast bass lines but only in high notes. In low notes it does perfect. Whats goin on?