General Fi

i have been emailing fi and get a answer like i will check on your order monday then monday comes with no reply than i email again and get no reply actually i emailed about 7 more times no reply no answer no info been waiting over a month now and they cant even tell me anything or reply to my emails wtf is going on with fi

I have sent several emails to change my order of the bl 10 from dual 2 ohm to dual 1 ohm, but I have not received any response if they could do it. I was wondering if I could just get a conformation on if they can do it or not. My order number is #1379.

Hello All, I have a 300c, currently I am running an Audison - Music Expression (sorry if there are linking rules) to a 4 ohm sub (HERTZ MILLE ML 3800 15" ). I understand that I can also run this amp in mono to a dual 2 ohm. I like to listen to a lot of hip hop but also a good classic rock and some new rock (audio slave etc...) When I get into my rap, I like to really feel it, I like the low lows... I know its hard with the trunk on these cars, but I was planning on purchasing the BL15 Dual 2 Ohm and the daily option. What do you recommend?

So, i put a temp amp in with my BTL. I put a hifonics 1610 in and OMFG. No words can explain how happy i am with this sub woofer. I just cant imagine what it will is going to sound like with my t 30001bd on it, it is going to be just NASTY. I am going to hook up a t10001bd up to it tomorrow to hear what it sound likes with REAL clean power not Rockford poop. Just letting you guys know i am a verry satisfied customer.

Whoah. I mean, whoah. My Fi Q showed up today and I'm in awe of this sucker. It's built like a tank! I've been through quite a few subs and I think this single 12" might end up putting my two Phoenix Gold RSDc 12"s to shame. My main goal was to reduce weight in the back of my Scion Tc trunk while still maintaining some heavy punch. Here's some eye candy, including the custom 1.3 cu ft Fisher box I had built especially for this little monster. I can't wait to get it mounted and broken in. Thanks Fi!

I ordered my sub on the 4th of this month & I havent heard ANYTHING from FI. Whats going on with it? I really need to know. I ordered an FI BTL 12 for my camaro. someone help!

well originaly i was gonna get a BLT fully loaded for daily driving.. BUT NOW im not sure if i should run a BL or the BTL... ive heard of people running the BLs more for daily.... heres what i got a RF amplifier benched at 1,620watts RMS at 1ohm.... and only running a single 12inch sub. currently im running a 12inch REaudio SX sub BUT............ it overheats and STINKS if i pump it to much... which i know IS BAD!!!!!! and well i KNOW im overpowering that sucker.LOL since its only rated at 1K watts. and well iwant more bass but still good SQ cause my subwoofer setup is front firing into the cabin and i drive it DAILY! which would you guys think would be the BEST DAILY DRI…

I was just curious about the specs on the lineup,specificly the Q.Maybe its just the picture but the Q18 looks like it has a small mag.Whats the weight of the whole sub?whats the mag weight in oz?Im sure its designed for that application but the BTL is the only sub that looks proportionate.Dont get me wrong everything Fi does I like.My eyes have a hard time with big sub little mag.Hope this makes sense to everybody!

I have a brand new Hifonics GLX1400.1D and all new 2 gauge wire ran. I should have my ssd 18 sometime in the next couple weeks. Does anyone know what i should tune my box too? its all going in a 01 eclipse(hatchback). I also would like to know what i should run my subsonic filter and everything as. If anyone could help it would be greatly appreciated!!! Thanks!

well i decided that im goin to buy either buy a 15" BL with only the p chamfer or a 15" Q with the BP option, i have a kicker zx1000.1 rated at 1258 watts total, that box im goin to build is ported and 4 net cu. ft. tuned at 32hz. dont have exact dimensiobs but i will soon. my question is, which sub will perform best with that kind of power. i know that the sound is all box dependant, but which one will most likly get louder, and sound better its my first build, so anything that can get loud and sound good doin it is fine with me thanks

Really want an Fi hoodie but am always skeptical about buying clothes I can't try on first. Anybody know if the Fi hoodies run on the small or large side? Not sure whether to order a M or L...

Ok so i got 2 12" SSD Subs and i was wondering if anyone could post me a link on what kind of box i should get with them. Ported or Sealed. Just let me know

wich is the best glue for reconeing and where can i get some

Are any available yet? when will the other items be up? Im looking to get some stuff:) also waiting for the new shirt samples to see what designs/colors with placement of logos and such, then i will be ordering thanks

Looking at NEW (not used) vehicles that would be good to put a huge system in. It needs to be under $17,500. So far the only ones that I have like are the 2008 Scion XB, and the Jeep Patriot. Any suggestions would be awesome. Thanks guys. Dan

Finally got my 2011 SSD and installed it today. It's making a loud "popping" noise when it plays. I thought it might be because it wasn't sealing against the box right, but after several hours and a bead of silicon around the mounting ring, the pop is still there in full force. In person it sounds more like a metallic slapping than what the video shows (The last two hits in the video sound more realistic at the very end) http://www.youtube.com/watch?v=Egh_QLqf4ug Ideas?

im about to get a 18" btl on a hifonics brz2400 but i was thinking about getting 2 15" btls on a hifonics collusus 3200rms. Which would be louder?

To Whom It May Concern (probably Scott), My name is Brad and I currently run a DIYMA 12" subwoofer in a .5ft^3 box. The DIYMA is an amazingly solid sub with HUGE stacked magnets, but its weak point is definitely its cone. Unfortunately, my cone cracked with less than 150 watts and gain set properly. So I am requesting a custom recone kit for my DIYMA. It has a 3" x 2" 4 layer voice coil. This sub is pretty beefy (37lbs) so shipping it would be a last resort. Can you create a new recone kit for this sub? All information on the sub can be found at www.diymobileaudio.com and I can personally talk to the designer of the sub if you need more information. Thank you. -Brad

I was curious about the universal option offered for the BTLs.I understand that it is so you can change between dual 1 and 2 ohm coils, but what are the drawbacks?I noticed it says that if you don't get the universal option that the motor will be optimized for the ohm load configuration you order.So does that mean that a universal BTL won't ever perform quite as up to par as one that isn't universal?Just curious, because I figured if their were no drawbacks then all of the subs would have them.Thanks man for any feedback.I really appreciate it.

So i have an fi q 12 sealed at 1.2 cubes and it sounds like chit to me. It isnt musical at all and it makes a ton of mechanical noise. most of the time thats all i hear. I am running it off a hifonics 1606 amp with the gain turned half way up and the bass boost all the way down. I have a alpine 9883 HU with the sub at + 15 and bass -2. The sub is inverted and it is down firing in a hatchback. Any opinions as to why i it sounds so chitty to my ears. I mean my old system was 2 10w6v1s and it seemed like they were twice as loud off only 650 watts.

Hey guys, just wanted to give you an update on our shipping. We have changed from UPS to Fed Ex. Now when you place your order, you will not get a tracking number until your order actually ships. Previously with UPS you would get the tracker as soon as your order was processed, so customers thought that there order had already shipped, when that was not the case, as we still had to machine all the parts and get it put together. Just trying to let everyone know, what is going on in the world of Fi. Thanks, Shawn

Ok, I have owned quite a few subs in my quest to find the right one for me. I searched long and hard for a '05 XXX 12 and I finally got one powered by a tantrum 1200.1 in a 1.1 'ish cubic foot enclosure. I think it's suffocating though. It sounds good, I just think this sub was more suited for a larger sealed or ported only enclosure. For my vehicle I can only fit a small sealed enclosure, so I was thinking of going back to a Q12. I have a SSD12 with copper coils/BP but it's in my home theatre setup right now. Should I keep the XXX, because it is an awesome sub or go with a equally awesome sub the Q12 because it's better suited for my application? The vehicle is a 2002 …

This summer I will be looking to upgrade my system. I am strongly considering an Fi product, but I do not yet know which one. I guess my question is what the minimum and maximum power you would suggest running on the SSD, Q, and BL. I would not be purchasing a BTL due to power requirments. I certainly do not want to blow a new sub, but I do not want to underpower them either. So, what is the power range, as well as optimal for each of the three? Thanks

i ordered two fi btl n2 15's and i was meaning to order 18's..i ordered em sunday. any suggestions on getting this resolved?

I just turned 17 and im getting a 2010 maxima next week. I ordered a 12in fi bl fully loaded and a sundown sae 1200d. I also ordered a stinger 0 gauge amp kit. Scott@ficaraudio sent me an enclosure that is 2.3cf and tuned to 33hz. I am planning on doing the big 3 upgrade, all 0 gauge and building the enclosure myself. This is the first time im getting a system. Is it going to be VERY loud for my very fisrt time having a system. The sundown sae 1200d is capable of producing 1500 watts rms at normal operating voltage, thats what jacob fuller at sundown audio told me by email. So is that 1500 watts rms going to pound my chest? I have heard, in my school, 2 mtx 7500's in a s…