General Fi

is it possible to get a recone for an old xxx 15 built? i know it was possible a few months ago but i know yall are busy to. and SORRY scott. i had sent you an e-mail before reading the sticky on NOT SENDING YOU E-MAILS other than shipping info.

I have a Alpine Mrd-m1005 Amp (1000W Rms 1800 peak) amp in a 4.0 cube 35 hz box (aero port) with Alpine Type R 15. Going to purchase a Fi woofer but really unclear as to which sub I should use. Also unsure to what my setup would compare to an Sq/LSQ/Spl setup. Bassically, I love how my current setup shakes the tip of my nose and the hair on my head when I play good bass songs. Seems to hit the lows reallllly well. Also, moves a decent amount of air. I am leaning more towards that setup but something that will take it to the next level. Should I go with the SSD or the Bl 15? Knowing that.....My second option is to run my US Amp 2000 (2000W @ 2 ohm) amp to which Iv…

So what should I set my low pass at for my FI Q10 that I am getting ready to install? Its a D1, if that matters and the woofers I am running are 6.5" Rainbow Kicks.

so what is it with fi customer service :/ do they not give you a shipping / payment confirmation email at the least? I ordered a recone kit on friday may 22nd before 3pm and have yet to hear a damn peep from anyone @ fi yet they had no problem communicating with me through email pre-payment being sent... i'd like to not put fi under the shitty customer service category, but it's heading that way. i sent out an e-mail to scott / nick / recone / orders @ ficaraudio.com, hopefully I get some kinda results. I trust everything will be resolved, but when? how long must I wait? if it hasn't even been processed and shipped yet i'll be pretty effin pissed..

Scott, i sent u an email about getting a recone kit for my BTl 18. i also sent nick and shawn an email about it but i never got any replies. im sure you all get tons of emails but its been a while since i sent those emails. if u could email me or post on here or something i can give you all the info of what i need and you can tell me how to go about payin you i would really appreciate it. my email is [email protected] AIM screen name is crabmaster596 please let me know something i need this sub reconed at least before June 22. id like to go to scrapin the coast with a BTL instead of my old XXX thanks

I sent my FI BL12 fully loaded out to be reconed over a month and a half ago and it hasnt been sent back to me yet. Ive been in contact with FI and they said they thought it was shipped out already....Where is my subwoofer? Can someone from FI please confirm my order and make sure my subwoofer is done and will be shipped out soon! Order number 1089

ok i see all these people talkin about how they wire their stuff at .5 ohms. how does that work? i mean like on amps, the ohms are usually 4, 2, n 1. well im askin this because right now i got 1 dvc ssd 12" (bp n flatwound) with a hifonics amp powering 1200rms watts at 1ohm. i was thinking of getting another ssd, so that mean i would get an amp to power 2400rms watts. i looked at some of the wiring configurations on kicker n 12voltz website n it shows that i can only have them at 2 ohms or .5 ohms. at 2 ohms the amp i wanna get is kinda really outta the way money wise because at 1ohm it is a lot more than wat i need. so yea im just wondering how i could achieve the .5 ohm…

So i went to pick up my sub today here it is

Okay so i done a search and couldnt find much on this, so i need to know weather to get dual 1 ohm or dual 2 ohm on a single btl for a daily setup, in a 2 cubic ft box with this amp http://cgi.ebay.com/Power-Acoustik-OVN1-3000D-MONO-3000w-Car-Amplifier-Amp_W0QQitemZ230365510858QQcmdZViewItemQQptZCar_Amplifiers?hash=item35a2dabcca&_trksid=p3286.c0.m14 .... and depending on what ohm set up for the speaker does some on have a diagram of how to wire it up? Thanks in advance!

What does rescheduled to 3/7/2007 mean? Is that when I can expect it. UPS is showing my sub as rescheduled to 3/7/2007.

I have 2 04/05 RE XXX motors. This summer i wanted to recone them to DVC 2ohm 12" and i was wondeirng if fi offered a recone kit so i could do it myself that way i wouldnt have to pay for shipping to fi for each of the motors. Also how much would it be? Thanks.

Hey guys, i need help with a box design and unfortunately im strapped on time. If someone could help me out with some plans with these specs i would be greatly in debt. Box is for 2 12's ( .15 displacement per) tuned to 32hz - slot port centered on box double baffle 3.6 cubic ft total 36w x 16h x ??d I need the width and height to stay at 36 and 16. I tried using subwoofertools.com but the program wouldn't give me 36x16x?? but rather 32.5 x 16 x 23.5 or something. Once again if someone could help it would be greatly appreciated.

im looking for 3-4000 watts its going to be for 2 btl or bl's 2+2 coils. im re-modleing my house right now so cash is kinda tight im looking at 2 pca 2000D's, 2 autotec 2000D's or 2 bxi 2006's what do you guys think i should get? or if anyone has a hook up that will work let me know.

I had an accident with my sx15 with dual 2's. And want a price quote for a recone. I'm not sure why but in my particular install the sx15 was .5 dbs louder than a FI Audio Bl15 with p chamfer, dual 2's, daily, and custom coils. So what I am wondering is if I buy the recones from you all can I be sure that it will still be as loud as the original SX or louder? If so how much for the recones and how long will it take to receive them? Thanks in advance for any help.

Anyone know the price for a recone kit for a regular q 12" shipped to 75211. Nick maybe????

Good evening all! What frequencies does the SSD12 with copper coils play the best? I have it in a 1.5^3 ft sealed box and I'm not sure what to set the subsonic filter and the low pass crossover at? I'm powering it with a soundstream rubicon 702 which also has another kind of feature, hawkins bass control. I think it's a combination subsonic filter with booster. Any advice would be great.

Okay just got this Re XXX 06. Wednesday. Its not even broken in yet. I thaught I wanted sq but i cant tell the difference. so I was wanting to maybe trade. Fi fully loaded btl, with the 3rd magnet and hixmx coil, 12 or 15. Or two Fi Q 12s. Just feeling not sure yet.

Just got a question, trying to find a suitable enclosure that would fit in the trunk of my charger and would be good for 2 SSD12 subs. Would this one work?? http://www.zenclosures.com/Dodge_Charger_Subwoofer_Box_p/chargerrecessface.htm Mounting depth - 9.00" Mounting hole - 9 1/8" for 10" subs & 11 1/8" for 12" subs (Adjustable by request) Total volume of airspace - 2.46ft^3 Adjustable by request (we can only reduce the airspace) Airspace per chamber - 1.23ft^3 -Spencer

Hi, this is my first post here and i don't know much about car audio so take it easy on me. I am considering getting 2 of the 12" BL's to put in my car. I dont really want them in a sloppy box in the trunk, but i don't want to take out my backseat to install them. I know it might look goofy, but the backseat in my car flips down, so i was wondering if it would be possible to build a box that has the speakers in the trunk facing the cab if i have enough clearance for the subs while the seats are up? This car will be for daily music, i listen to mostly jeezy, trae etc, but sometimes i like to switch it up with some death metal (In Flames, and the like). What amp will i need…

I'm getting my fi btl 12 fully loaded..and I have no clue what screws/bolts to use. I've read some forums and some people have used bolts with t nuts..anyone please help.! I need exact size that will fit the holes and will hold my btl nice and sturdy!

the search function doesn't like it when i search for anything about the Q's and i searched backa couple pages and didn't find what i was looking for. anyways, i'm considering upgrading to a second Q. and i have 2 questions. i would rather not half to upgrade my alt, seeing as i just got a brand new stock alt put in 2 days ago cause my old one completely went out. and i can't return it now that it's in.. (and i don'th ave money now.) so i want to know if my current SAE will be enough for 2 Fi Q's? and i know it'll power them, and probably be just fine. but what i'm asking is will it be worth upgrading to a 1500? i would go 2000 but i'd rather not have to upgrade my electr…

since fi makes such wonderful and accurate woofers are you guys working on mids at all? i would surely purchase these without hesitation.

i have 18 cu to work with after displacements, and im wondering if that is enough air space for 4 bl 18s or do i need to step down do the bl 15s?

Happy birthday dude.

just want opinions what do most of you guys use? I have them wired with 12 guage right now. Was wondering if it would really make any differance if i used 10 or 8 guage or would the 12 be fine?