General Fi

hey guys i know this is going to sound dumb, but i have received my tracking number a while ago and it has not changed from "billing information recieved". i have read the post about orders and what not and have even emailed sales and the other one but no answer i was wondering if anyone could tell me what to do ? thnks for all the help

New shirt in 7 Colors!! You can order straight off of the website www.ficaraudio.com New stickers too... Fi Bomb! Fi Gears! More to come..

So I bought my Fi Q 15" a little over a year ago but due to a DUI its only gotten about 4 months if that of playing time. I just got my license back so i was excited to finally get to hear it again. After only a couple of days it shot out a large cylindrical metal piece through the dustcap. The dust cap is fractured but the the insides of the sub look fine(coils and whatever else i can see). I've never seen this happen before in person or online. I have it in about a 4 cubic foot box tuned to 32 hz. Its on a USAmps XT2000D and definately not recieving full power for the sub and the gains are turned down. I didn't change anything in the setup since i last drove it a year a…

Just curious. As of right now for me, I ordered mine on sunday. Still haven't received any email yet other than order confirmation :/ I do realize today is the first business day though. I wonder what the quickest someone has received theirs is.

Ok I have a 12" Fi Q and love it! So I was wondering if someone could point me to examples of full range or almost full range 6.5 round drivers for the back seats in the doors. Right now I have full range Pioneer drivers, but was wondering if getting something like AAs Poly Driver would improve the quality of the sound, or should I not bother. Somehow Fi is related to Ascendant Audio, not sure how though.. Thanks. Mike

I am trying to run 2 fi ssd's in my truck at 2 ohms... i would like to find an amp that is 2000 rms at 2 ohms... would like something cheap working on a budget here.. any suggestions?

Which would be best? A US Amps XT2000D (1200 rms), US Amps XT4000D (1500 Rms), Hifonics BXI-1600d (1600 rms, but probably closer to 1200), Power Acoustik OV1-4000D (Says 2200 rms, but ?), PA PS1-3000D (1700 rms, but ?) (is PA good?),

Which sub would be better on a sundown saz1000 The Fi Q or the SSA Icon 12" Driver.. 2.5 cube airspace

Its been awhile since I had good pair of 18s, and I just ordered 2 FI BL 18s with cooling and flatwind. That was by far my best pair of subs I have owned in the past and decided to go back with what I have had the best luck with. Going in a 2012 scion xb

man sorry i forgot to include the Fi forum in my announcement of a few new vids.....im not used to coming around here too much but ill try to come around more. Its hard to keep up as you guys probably understand "Sactown Car audio" and "Tapout" are the latest......the Sactown one having some decent Excurt' on the subs.... scroll to the bottom.......theres 75 or more vids total http://www.stevemeadedesigns.com/index.php...3&Itemid=42

Is it comparable to the Q or BL? i just want 1 12" sub that will sound nice and still get loud in a ported box. this is my first option. Or i would get 2 12" CV vmax. either would be powered by a kicker zx750.1(900rms) Opinions?

I am currently beginning an installation for my 2002 Ranger super cab. I will be running two BTL 12's in this install. I would like some opinions on this setup. Some people may think im crazy for putting this into a small space. But I live by the rule get loud or go home. Let me know what you all think about how this will turn out and how hard it will be hitting.

i have a posting on craigslist for a set of 15 inch btls....the guy said he competes and he was lookin for some heavy duty subs. then he askd if i still had the the FEE BEATLES (fi btls) in case ur slow and dont get it haha

Hey guys i have a 05 Rx8 and im ready to put a system in it. The rx8 has probably the smallest trunk in the world haha. i was wondering if i can put the FI BL 12 ported in a 1.5^3 ported box. or should i just get a 1 12 Fi Q sealed in a 1.5^3. i was also looking at the new Re Se-x, will 2 12 se-x be louder then the 1 12 Fi Q? thanks you.

I have just acquired a PSI platform 3 woofer and I would like to get it reconed with Fi soft parts. I cut out the coil and it kinda looks like a BTL triple stack coil would fit. Would you guys be able to hand make a drop in kit for this woofer for me? I will post pics of the coil and motor if you need.

I have a 2 cubic foot box ported at 32 hz, and a hifonics amp that puts out "1200" rms at 1 ohm. Would a BTL run ok with this setup???

hi ive been tryna to buy a sub and you guys were replying but than just stopped..my email is [email protected] im the guy who is tryn to buy from canada..i kno you guys are busy but im tryin to get this for xmas thanks

so i Have an Fi SSD 12 Subwoofer and a planet audio 4000.1 amp i dont know if i set the levels on the amp correctly or not. so i just hooked it up yesterday and when testing it out i feel that the sub should be playing louder. Maybe i have to what till i breaks in to get louder or what ? thanks for any comments.

I ordered a 18" BTL at 1ohm. I have a Hifonics brutus BRZ 2400 watt rms will that be too much? Also if my sub is 1ohm can i wire it to 2ohm on the amp that way it only push out 1700watts rms?

i know a guy just made a thread about a tc9 recone but i didn't want to jack his thread. so yea im wondering how much a dual 2 ohm 15" recone would be for a TC-9+ motor, i already have a 15"12 spoke basket for it. shipped to zip 55407. Thanks -Lance

So I was expecting a bunch of tiny stickers, and a t shirt with a small FI on the front... This is what I got.. First of all, For free, anything is great, however, I would have gladly paid for this shirt as well as the big ass sticker... Thanks Scott

I talked to you about a month ago about my tinsel leads being snapped in half on my 12" ssd and you asked for pictures, and then for me to send it in along with all my contact info and what coil i want in it. I sent it off on 5/29 and the tracking info said it got to you at 6/3 and mike signed for it. I sent you a reply email asking if you wanted the tracking # before hand, and didn't get a email back. I'm just hoping to hear some sort of update on this. Thanks

Hey everyone, I've had my fully loaded bl 15 for about 5 1/2 months and i love it. But now all of a sudden im having some wierd issues. One morning when i got into my car and was driving i noticed i had no bass at all so out of curiosity i turned it up to listen closer and all of a sudden the sub kicked in but when it did it was distorted sounding. Now ever since its been the same way and not to mention its not very loud now. Even when i first got it and was using my stock battery it sounded louder and better. Could my setup be clipping? Any thoughts? All help is greatly appriciated!

Hi all.. im new @ the FI forums and need some help.. Ok, so i MOSTLY listen to Rap & RnB.. I was thinkin about getting [ONE] Q series 12inch (I drive a 05 Nissan Altima, so limited on space in the back of the trunk) w/ BP power and 1 Ohm.. Ok so my question is do/can FIcaraudio put them in enclosures (Ported)? and is this a good amp to power it? ---> http://www.sonicelectronix.com/item_12210_...+BXi+1208D.html Also, how good are 12inch Q's w/ Rap & RnB? also.. what is BP Power?? thx 4 the help

Is there any info (approximate date, type of speaker etc..) on the "new line" that is going to be released?