Subwoofers / Speakers

here ya go... sorry guys..hehe UC them now? hehe

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5781162501&rd=1 it looks strikingly similar to the first proto LMT or the famous uber...

Hey guys, I am maybe looking at doing a Diy component set using the Mli-65 Mach speakers. Right now I currently have 5 1/4inch Alpine type S speakers in Q-logic kickpanels becuase my car is a 94 cavalier which only supports 3 1/2 speakers, so I bought the kicks instead, With that being said I was wondering if there is any way I could make A wooden baffle so that I could mount 6.5inch mids in the kicks? Also how would the Mli-65's work in a Diy component set? I was thinking something like Wiring the Mli-65's directly to an amp, then from the mli-65's run a inline bass blocker to the tweeters do you think that will work okay or am I better off buying a inline crossover? I …

DC Sound Lab Subs Level 3 and Level 4 How much are the Level 3 10"12"15" and level 4 10"12"15" Dual 2ohm? Thanks

As the title states... Im looking for the recommended box sizes for the subs (both sealed and ported). The place where they should be listed on Sundown's website are all blank. Tried searching as well... but no luck. I at least found the displacement on the 10" is .25 Thanks in advance for your help fellaz!

This is the funnest sh@t iv ever had to try and read... he's just making up anything... He's High.... http://www.ddaudio.com/dd/caraudio/woofers.asp?series=z I love it...

Does anyone know the exact outter diameter of the hcca 15? Cant find it anywhere and doing a blowthrough for someone and its going to be a tight fit

Im getting a new system soon and i was trying to decided between the dc level 4 and the hdc3, i heard a couple saying that the Xl's are more comparable to AQ's, and i also heard many saying the dc's sound a lot better. My question is which will hit the lows better and sound better?

Does anybody have any experience with this driver? Does it sound decent? They are inexpensive and are supposed to be fairly nice drivers i was looking at pickin up two 10" and tossin each 1100w How would they stack up to two fi BL 10"?

Since I can attatch movies here and I seem to have quite a few. Anyone want to see more? I will post some as long as the mod's deem it ok. I just don't want to suck up a ton of bandwidth. Most movies are in the 3-5 meg range.

Need amazing midbass bass and mid perfromance in an SQ set up. I have an 98 EB expedition. I have a 4 channel alpine 65 watt/ channel. I have an saz 1500. I have an 880 pio. I have 4 rolls of RAAM and 10-12 yards of ensolite on the way. I will be getting some 1/0 and the big 3 done. I listen to all music. Techno ie bass mechanics, BT, bjork, vnv nation. Hip hop ie, Atmosphere, Jurassic 5, dj shadow. Classical ie vivaldi, orff carmina, lovely ludwig van. Rock ie tool, slipknot, dragonforce. Classic rock ie clapton, zepplin, hendrix. Rat pack music. I just went from Arlo guthrie to frou frou to the dobie bro's. I gets gown with everything. I listen to everything.…

hello. well iv narrowed my choices down to the ones above. i will have them running on a kicker zx1500.1, 4 gauge wireing, in a ext. cab ranger i want a little of both ( SQ and SPL) i dont want to spend over 325 max.

Im just tryin to see how loud decibels are from 120, 130,140, and 150. I think a while ago someone told me that 130db's was like gettin hit in the chest and its very hard to breathe at 150. Is this true? Can someone give me examples of each range of decibels.

Ok so I see a lot of conflicting answers regarding a small box if you plan on over powering your sub. Be believe in it, others say it's a lie. My question is if you're gonna over power a sub. What would be considered smaller ? I'm thinking about 2 15s. They call for 3-4 ft3 but I'm thinking of putting them in a 5 ft3 box. After displacement and port. Im looking into the sp4v2 and putting them on a hd8k. I know they are underrated. And the taramps is over the rms slightly. So I wa wondering if this will work out well. The reason why I'm asking is because I don't wanna sacrifice more space for my box. And seeing how the 8k is more than enough for the subs, I …

Just got my new 2ohm dvc sub yesterday an threw it in my new box for 2 subs Immediately saw that new one flexed much more then other one. Pulled each out an tested them an here what I found.. Sub 1 has 2ohm at each coil Sub 2 has .6 at each coil I tested each sub in series by itself an got this.... Sub1 4ohm Sub2 1.6 ohm Sub 2 is bran new out the box to btw... any ideas?

i recently picked up 2 15 inch RE destroyers...i thought they were MT's that had a recone. come to find out they are not lol. Apparently RE made 24 Destroyers. they are very similar to a MT with the same basket only painted dark gray metallic and have a slightly bigger motor. suppossedly they have 4 inch voicecoils and have to spl of a MT but better SQ too...only 24 EVER MADE! any info on these would be great cuz i know absolutley nothing about them other than they were used in comps by team toxic bass

I'm doing some research for my summer project and have a question about the amount of subs and power. Same subs and power, just different number of subs (I'm strongly considering Sundown's E8's). The question is, which setup would have more as far as output and low end? Less subs and more power per sub or more subs and less power per sub? Or, is it a situation where things would be pretty much equal (kind of like balancing out because less subs/more power=more subs/less power)?

so i've googled everything i could think of with minimal results. so i'm asking you guys anyone know a good place to buy any and all parts needed to build/repair subs at decent prices? and im really looking for the tall arc shaped extended displacement surrounds, prefer rubber but foam will do. also looking for all other parts also. if anyone can help it would be much appreciated

I have had my ascendant havoc 12 for about a month. Recently I decided that it was broken in enough to see what it could do. I set my gains again, this time with the dd-1, but when I turn the volume up a little it sounds like it is bottoming out. I have a t1500-1bdcp that's rated at 1900 Watts rms at 1 ohm. I thought for sure that the havoc would take that much power and not bottom out. Could the noise be something else? or is it really maxed out?

Well guys, after a very loooooong wait...its finally over! And let me tell you, I have not even heard this thing yet and Im already creaming my panties. Here are some pictures, and when I have it installed hopefully a little bit later today I will update with pics. For those of you who already own an SSA subwoofer this will be nothing new for you (but probably brings back some great memories!). For those sitting on a fence trying to decide which way to go??? .... I have to say as far as shipping goes, SSA gets an SSA+. Holy shit you guys do this right! You guys even included a living room table! My son playing in the box. …

Ok real simple. Wall in a first gen two door Blazer. 2x18"subs. I will buy the apms accordingly and have plenty o' space for a build. Back seat is out and will be staying out. Now would you go with the DP 18's or the new xcon 18's? I'm torn. Don't want a SPL only machine. Just a groundpounder.

Ok Ive narrowed it down to these 2 subs going in a 2.34 cu aero ported box.Any opinions or videos on the icons?

i want a system that is crazy loud with great frequency range. i like hearing the jumps and drops from one frequency sweep to the next in my songs. i had a sub @44hz that i loved but it was not loud enough and had no low end (44hz, no low end? go figure). so i bought a new one and tuned to 35 and now i have no high end. so my thought was this. what about building a wall, dual ported subs with one tuned to 32hz and the second at 40 or 45hz. installing xovers and subsoncs to prevent the 2 subs from over laping one another. would this work or should i just build a sealed box and be done with it? i was thinking 2 SP4 18's

What effect does it have when wiring the tweeters out of phase? I've heard that it can be another tuning aid, but not sure what it does, or is supposed to do to the soundstage or sound of the tweeter. Will it make them more laid back? Make them distort easier or affect power handling in any way? I ask because I want to make sure if I try it that I don't do more harm then good, so any caveats are appreciated. Searched online and didn't find any useful info, but figured some of the more experienced here might share.

A number of folks have been asking when the SPL-15 would be available. Given the existing sales of the current SPL-12, I am finding it difficult to justify the added expense for another driver in the line. I am however, open to doing a small run of SPL-15's provided there is commitment from those folks who are interested in acquiring one (or two or three...). To picture of what the SPL-15 would look like, imagine the beefiness of the SPL-12, only in a bigger version. There, simple wasn't it? So, those of you who spoke of, or asked about an SPL-15, belly up to the bar and let's talk about it. Best, Mark