Subwoofers / Speakers

will this box be big enough for 1 10" level 4 xl? this box will be going under my rear f150 seats. it is a sealed box but i need some help designing it to be a ported box. but overall i need to know if there will be enough mounting depth to fit a 10" level four xl. Thanks

curious what pair of 15" sub woofers would thrive in a box that is about 7.5 cubes and tuned real low.....about 25hz..

Here is the deal, I have roughly about 6 cubic feet I can give for a box. Right now I have 2 audiopipe txx 15's that are rated at 1000rms in a 1.5ft sealed enclosure each ( I know the box is small). I want to run 2 15" subs ported in a 3.0ft box for each but is that enough space? I love low notes and spl pressure so im looking for a new setup. I've talked to Tod at digital designs and he said go with 1 DD 9518g in a 5ft box ported. THis is for a daily sub with good quality but i do want some pressure. Would it be The subwoofer will be in my trunk and not in a wall behind the seat. Another question, does anyone know the power rating on a fully loaded 18" btl? The DD9518g i…

well im looking to go 3 way in the next couple of months and i think i have found my system. this is going in my jeep hu- clariondxz785usb amps- sundown 100.2 and 100.4 speakers(this is where I need opinions) tweets- seas prestige 27tffnc/g midrange- Eminence alpha-6a midbass- peerless nomex 8" plan on having midbass in door sealed and midrange and tweets in kicks. Does any one have any objections to this setup. and will these speakers work good together

I bought two brand new dd 3512's I thought they blew but when they got to dd they said that the motors had shifted. Then they asked me if i droped my box or if a had gotten in a car accident. (which i hadnt) they fixed them and they are on there way back I was wondering if this has happened to any one else??? im running 4 subs all 3512's other two where fine.

can i put to one 15 MAW dual 4? I know it says 500 watts rms, but i wanted to know if it can handle more power than that and if so how much? Thanks

OK... got a recone for my SPL-15 motor but I have some questions. They might seem dumb but i have never done a recone so i have to ask. 1. the Spiders on the recone are smaller than the original and do not sit in the same spider landing... it does seem to fit fine a couple landings down though..? this OK? 2. the coil from the recone is much short than the oginal as well...? 3. I didn't get any shims/spacers or whatever you want ot call them...? what should I use? pics are coming... When i ordered it, it was suppose to be run on a 4Kw @ 1ohm, now it will be on a 2000D @ 1ohm instead...

I am getting back into audio after a long layoff. I wanted to know what you guys thought would be the best speaker setup for mid and highs. I am planing on buying the new Zed Audio 6ch 150w a ch when it's released. I have been thinking of such brands as morel, focal, dbl, and polk. Price does matter would like to keep it under 1000. Thanks for any input. Troy

Hey guys, I was wondering which one of these two subs would be better for me. It's either the 18" Xcon or the 18" Nightshade. Only $50 difference between the two right now. I'm going to get two. Probably get powered from a saz-3500d. If no deal on another amp comes around. Main goal is to do hair tricks and shake other vehicles at comps. Thanks.

I am looking for some 6.5 inch components, RIght now i have a set of Swiss Audio sak-650's in small sealed boxes and Pioneer Ts-A1702c which are also 6.5 inch but i built small boxes tuned to about 45 for those. I would like something better than this and i would put them in the ported box. I am using these at home so mounting stuff is not a problem. Also for me the pioneers are better. what would you recommend? Also price is kinda of an issue, so the cheaper the better. Thanks

Last weekend I made up a modified MJ-18M and we decided to do some power testing using a SounDigital SD-12k. This unit has a single 1 Ohm voice coil and a couple of other mods: The box we placed it in. Not sure what the size or tuning was as it belonged to Murilo. Perhaps he can comment on it: First test went fairly well with 1.5kw: Second test did better with more power: Third test was with 11.6kw of power: Fourth test didn't produce any more output but the FrankenMJ took quite a bit - almost 16kw(!): That's pretty decent power for a single SD-12k amp!

been looking at the audiopipe horn and bullet tweeters...wondering if they are any decent, and what is the advantage of horn or bullets over regular tweets

Ok real simple. Wall in a first gen two door Blazer. 2x18"subs. I will buy the apms accordingly and have plenty o' space for a build. Back seat is out and will be staying out. Now would you go with the DP 18's or the new xcon 18's? I'm torn. Don't want a SPL only machine. Just a groundpounder.

How much will the subs break my wallet for and do you think 6.416ft^3 @ 30Hz with a Sundown SAZ-2000 would be a good combination for your subwoofers?

The box will be between 4.6-5 ft^3 @ 30-33 hz, it will include 2-12" subwoofers (subs up, port in front) powered by a Sundown Saz-2000d. Big Three already done, battery upgrades coming soon and it will be going in the trunk of a Saturn Ion-2003. Which subs should I choose, price is not an option but listed in least expensive on up(if you suggest a sub thats not on the list thats fine, all input is greatly appreciated): SSA Icon $275.00 Sound Splinter RL-P $295.00 Incriminator Audio Death Row $319.00

I know I normally hate people that do this, but I need some help and time is important. So to barge into forums and throw out some questions, here goes. I'm going to buy one Fi BTL 18" sub. I am hoping to eventually get two, but that may or may not happen. I do not want to spend more than $600 to amplify the one, or two of them. I have found some pretty cheap (and at the same time nice looking) amps from sound storm laboratories, on a trusted website (sonicelectronix). The first amp has a 3400 watt at 1 ohm power handling, and 2200 watt at 4 ohm power handling. (link: http://soundstormlab.com/main/620) The second amp has a 2550 watt at 1 ohm power handling, and 1800 wa…

I can't get a lot of info and no reviews for this pro audio speaker i guess because it's new... I currently have a sundown 100.4 and a set of ID components rated for 100wrms per side. I want to bridge my components to the sundown 100.4 but i'm sure it will kill them due to too much power.. Question is- If i purchase these pyle pro PNDW6 6.5s, where do i look at replacing my current crossover with a new one so i dont burn it up due to too much power. I looked on partsexpress but it looks like u have to finish building them, i'm looking for already built ones.

What design is better a 4th order ported box or a 4th order passive radiator box with a one to one ratio (passive to active). The radiator seems to have so many more advantages... so why does everyone have ported boxes?? looking for some ideas and opinions on this, might redo my box soon.

Has anyone tried them? http://cgi.ebay.com/BassX-SubWoofer-High-performance_W0QQitemZ320242665871QQcmdZViewItemQQptZSpeakers_Subwoofers?hash=item4a8ff3498f&_trksid=p3286.m20.l1116

So ive got the Fi 15 right now, and adding a sundown 1500D and an extra battery in the trunk this weekend.... But i was looking around on the for sale/wanted... and saw someone has a fi 18....and made me want to go louder before i even got my new amp in! So do you guys think i should stick with the 15 or go with the 18.... Its the 04 Lexus IS300 which are pretty small cars, and i dont want to rattle the thing apart since i just got it ... just so confused! what do yall think?

im thinking about buying four kicker l5 15 inch subwoofers. i sent kicker a e mail what size box i was wanting to put them in 16.04 cf inside. that would bring it to around 4.01 each subwoofer. i told them i wanted to port the box and they sent a e mail back this is what it said.shrink it down to 14 cf internal . this will have port and woofer displacement already caculated into it. give the box 160 square inch port opening and make the port 19.5 long into enclosure. seems to be to small for them what are you all thinking on this? what would that give the subwoofers after woofer displacement and the port they gave seems to small they also said it would tune it to 35hz

I have issues with eD subs, here's the link>>>>> http://pierceaudioproducts.com/forum/index.php/topic,897.0.html

I have had a pair of IXL 12's sitting around since last summer. With the DBDrag coming up locally in a couple weeks I felt it was time to get my arse in gear. Heres the Basic design with the exception that I decided not to do a driver flush mount and therefore increased the width of the top port piece from 4.5" to 5. This box is 3.2cubes net. We did an impedance sweep and its exact tuning is 33hz. Two weeks ago I got my pieces cut and asembeled. Sorry I fogot to take pictures of the bare box. Nothing special though. But Heres the finished box......I previously had an eD 15 in a 2.5 cubes @ 27 hz box in my car and it did a 140.6db on 1200rms. After only a few hours pla…

is buying a memphis pr12 w/ a box and 100w amp for a 150 a good deal need answers asap

Does anyone have pics of all the different color dustcaps you can get for the Fi subs? Im getting a Fi SSD 12'' and looking to see what looks good. Thanks