Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
I like for my lowest bass to be very strong. I'm not into the high/loud bass that you hear from street beaters. I'm very interested in the 2 Q 15's but since i have stock alt(2000 grand marquis) I doubt i go any higher than 1500 rms total for them. Which makes me think i'd waste them. Are the SS series subs as good with the low notes with that much power? I'm going sealed. I like the sound of subs in 4 cubes per and bigger. thx for any input..oh yeh, i also have the L7 on the list however my friends tell me the FI subs would destroy them
-
0
Reputation Points
- 8 replies
- 786 views
-
-
One of my d1 SSA icons is not hitting near as hard as the other. I have them wired to 4 ohms. I followed 12volt wiring diagram for it. I tried swapping wires on one sub to change phase but it didn't really do anything, maybe helped a bit. Its been like this since I hooked them up. Any ideas?
-
1
Reputation Points
- 8 replies
- 904 views
-
-
I'm looking at getting back in to car audio scene again. I haven't been up to date with it. So I have all my stuff picked out and i'm not sure what comps I wanna go with. They will be powered by a Sundown SAX125.2 or my Kicker ZX350.2. I currently have the Kicker. But id rather keep the amps to the same brand, as my sub amps will be the Sundown SAZ-1500D. For the price of the comps $400, but if they are worth it $500 MAX. They must be a 6.5in comp set.
-
0
Reputation Points
- 8 replies
- 1.3k views
-
-
been out of the loop for about 3-4 years now and dont know whos making what anymore. not looking for anything crazy just something to fill in the low end for the hour long drive everyday. small box, low power, >$100 music- little of a lot. country and rock mostly. a little top 40, hip hop, talk radio.... going in a civic trunk. got an alpine headunit 9855 i think, the one with the "glide" bar at the bottom.? jl 6.5" in the doors with an alpine 2 channel amp. not to brand loyal, but i dont want junk. again nothing fancy just wanna fill out the music. i think a single 10" or 8" will work. so question is whats a "good deal" now a days? - rob
-
0
Reputation Points
- 8 replies
- 968 views
-
-
anybody have any specs on these? a friend of mine bought some but they dont have any specs, i can find the power for them but as far as box design, i cant find any recommended enclosure sizes and i dont personally have any experience with them....anybody got anything? please let me know, thanks in advance.
-
0
Reputation Points
- 7 replies
- 901 views
-
-
I have a buddy who is about to make a purchase and would like a w6. He's wondering if the 13w6 is worth the extra $90 on egay. I don't have any personal experience with them, so what do yall say? Were going to go with either the JL spec sealed or ported, whichever sounds better on the amp he bought. What do yall with experience have to say? Any help is appreciated. Randy
-
0
Reputation Points
- 7 replies
- 3k views
-
-
I just bought a 15" FI BLT sub from a buddy, and was playing it in my tahoe today when the tahoe filled with some and noticed the sub was on fire..... we put it out with a water hose before it burned anything else my question is will recone fix it? or is there more that has to be done?? :-(
-
0
Reputation Points
- 7 replies
- 899 views
-
-
with 4 18''s and 30kw i needed to put some highs en mids. i gonna run. 8 sets ( coax 5inch) total 16 speakers 2 sets ( mids 6 inch ) total 4 speakers 2 sets ( extra tweeters ) total 4 tweets. wat will be the best way to run them, than i mean with the amps. i have already 1 4channel amp (rf t8004) what kind of total setup will be the best to run the front part? thnx
-
0
Reputation Points
- 7 replies
- 781 views
-
-
How well do these subs handle daily? I have around 2.7-2.9cuft NET MAX to work with (after port). What frequency do they like to be tuned to? I would like to daily beat and do comps so 38-40hz, or preferrebly lower? I would probably run 1000-1100wrms daily and 3000 for comps (a memphis mcd1000.1 and a sundown 3000.1) with a second battery, big 3, and 130amp alt (factory 90amp). cliffs. box size tuning port size daily good/bad? what do u guys think?
-
0
Reputation Points
- 7 replies
- 1k views
-
-
-
So I'm going to try to make a return after about a year of family problems, blown marriages, excessive school, and a lack of the addiction.... I first want to say hi. I'm sorry I haven't been around. I've gone through hell and back with some of life's more rough situations. I stopped logging AIM for a good while and as such, lost contact with many of my very close friends from here. I have a new AIM name: fifteenfeetoff. You can get ahold of me here from now on as I have it on now for pretty much the entire day. I won't be able to be a post whore like I once was, but I lost the time for a great hobbie I had...and I'd like to get that back. I'll be looking at some n…
-
0
Reputation Points
- 7 replies
- 1.3k views
-
-
Has anyone had alot of coil stuck down in the motor gap before? . . Have a customer that im doing a recone for and almost all of the coil is way down in the gap. . . Just seeing if anyone has any advice on how to get it out . Iv got a little out but just coming out in little pieces . . Its an american bass hd by the way
-
1
Reputation Points
- 7 replies
- 2k views
-
-
-
Trying to post a design I drew up. Dont worry it is not stick figures. I want to get your opinions on this box and amp rack. If anyone could allow me to send it to them through email and then post it I would appreciate it. I tried to use the "image" option and it did not work.
-
0
Reputation Points
- 7 replies
- 975 views
-
-
I have heard amazing things about both of these subs, which is cool. Actually, I have NEVER heard one bad thing. I am curious, how do these two subs compare. I am very much so a noob and know nothing about comparing specs really. All I really do understand is that the Q has a great XMax meaning what, more excursion which could yield more output (bass on the SPL side??)
-
0
Reputation Points
- 7 replies
- 880 views
-
-
So, from what I have read and come to understand, a larger ported box reduces the power required for a given driver to reach its mechanical limits. My question, then, is if you have the space to build a larger box, within the acceptable range for a given driver, and are not concerned with space or weight, would there be any reason to choose a smaller box? Given the same linear travel, would supplying more power to one woofer increase control and/or speed of the speaker vs the other? Or, since less power is being supplied and therefore stored in the coil, would delay due to inductance be reduced? Any other factors?
-
0
Reputation Points
- 7 replies
- 2k views
-
-
Could 2 stock 15 Fi BLs handle a Sundown sax 3000?
-
2
Reputation Points
- 7 replies
- 889 views
-
-
Will there be a Magnum D4? I wanna a pair of 15's when they are released but D2's wont do.
-
0
Reputation Points
- 7 replies
- 1.2k views
-
-
Well, I have had a lot of back and forth with Nick today but it worked out great. He has graciously agreed to donate 10 subs to the Audio Engineering Society at Michigan Technological University for use on a project of ours. We are trying to recreate the new Elemental Designs Dodecasub, but since we are using SI drivers I know it will sound much better . I just wanted to let you guys know that Nick is an awesome guy with awesome products,
-
0
Reputation Points
- 7 replies
- 1.1k views
-
-
found this listing on craigslist They want $25 for it 10 inch pioneer sub in box. works great! http://images.craigslist.org/3ke3pc3l5ZZZZZZZZZ9734b1943b6c0b71bc7.jpg i did some research and the sub alone retails for about $100 here are the specs: http://www.crutchfield.com/S-q2ffGnxXGbm/p_130TSW251R/Pioneer-TS-W251R.html Is this a bargain, hows the sub? im not trying to get the most powerful sub, just something that has some crisp bass that can bump in my car
-
0
Reputation Points
- 7 replies
- 915 views
-
-
http://www.woofersetc.com/index.cfm?fuseac...Product_ID=3417 thinking 2 of these sukers in a 3.25 cu ft. box sealed....they are 1.5 reccomended anybody gotem...or heard em...i hear they are pretty darn smooth im not really looking for output
-
0
Reputation Points
- 7 replies
- 984 views
-
-
Last weekend I made up a modified MJ-18M and we decided to do some power testing using a SounDigital SD-12k. This unit has a single 1 Ohm voice coil and a couple of other mods: The box we placed it in. Not sure what the size or tuning was as it belonged to Murilo. Perhaps he can comment on it: First test went fairly well with 1.5kw: Second test did better with more power: Third test was with 11.6kw of power: Fourth test didn't produce any more output but the FrankenMJ took quite a bit - almost 16kw(!): That's pretty decent power for a single SD-12k amp!
-
0
Reputation Points
- 7 replies
- 1.6k views
-
-
ok so im starting to think that i should move up into class street b, just because there is more competition aorund here for that and im sick of not competing against anyone (that is except like a single 12" type r), so right now i have 1 12" fi audio bl in the trunk of a cavalier, tuned to 34 hz on 1800 wrms. what i want to do is be very competitive in street b for db drag. however i really want it to be a ground pounder and hit those lows, so i was thinking a 28-30 tune for daily and a 40-42 hz tune for comps. but what i really want to know is which ten inch subs should i go with? the ones that pop into my head are fi bl, fi q, dc sumthing, or audio que hdc3. i dont…
-
0
Reputation Points
- 7 replies
- 779 views
-
-
How many watts can a BL Fully Loaded handle without any problems?
-
0
Reputation Points
- 7 replies
- 819 views
-
-
When did this happen? It looks like the website was just updated recently. Any chance there are some of the 'old' model ixl 10.2.2 and 12.2.2 with the lower FS kicking around to be purchased? With my application sealed is a lot easier (yes the recommended ported sizes are small, but you still have to get a port in there). I can't do 2.5cubes so the 15.2.2 is out of the question.
-
1
Reputation Points
- 7 replies
- 1.2k views
-