Subwoofers / Speakers

I tried to buy 2 Mj-18's from ssa and it said purchase failed. but when i get to my account and then to order history it says 2 mj-18's pending. does that mean theyre in my cart? or purchased?

I want to get one of these matching passives for my tc10. Do they really live up to their hype? If any of you guys by chance happen to have have one and are interested in selling, I would love to take it off your hands!

still diggin around on front stage ideas on my system and was wondering if anyone is familiar and can explain thier sound with 2 models that have caught my eye. the first being an 8" Aurum Cantus AC-200MKII and the second being a 5" Jantzen JA-5006 All replies appreciated in advance, thanks...

I was wondering if anyone had experience with the JL Audio Stealth Box or similar products. I am considering a stealth install in my 07 Tahoe, with this as the possible cornerstone of low frequencies. I am also considering Diamond d661s component with the silk vs the aluminum tweeter. I plan on using these in the factory locations 6.5 mids in the doors and tweeters in the A panels ie the factory locations. I was also considering USD 6.5 mid bass in the rear doors also in the factory location about 6 inches behind the front buckets. Amps (amp) are/is up in the air. I was considering a 4 or 5 channel of unknown origin to achieve the solution. Musical tastes run the ga…

what kinda of amp would u recommend putting on a 12'' mag? watts? need some help. i dont wanna under do it or over do it

What effect does it have when wiring the tweeters out of phase? I've heard that it can be another tuning aid, but not sure what it does, or is supposed to do to the soundstage or sound of the tweeter. Will it make them more laid back? Make them distort easier or affect power handling in any way? I ask because I want to make sure if I try it that I don't do more harm then good, so any caveats are appreciated. Searched online and didn't find any useful info, but figured some of the more experienced here might share.

I'm trying to decide on a set of 6.5" components for my new system. It's a daily SQ driver that I've already exceeded the budget for with the following: HU: Pioneer DEH-P5900iB Comp Amp: Sundown SAX-100.4 Sub: Sound Splinter RL-i8 DVC 4 Sub Amp: Sundown SAE-1000D I wanted to get Focal 165-V2's, but can't find a reputable online seller (local retailers are overpriced). I settled for the 165-V1's from Sonic Electronix, but I've never heard them in person... and I think they have a similar tweeter to the 165-A1's, which sounds harsh. I've read plenty of good anecdotal evidence in favor of CDT components, but I've never heard them in person. And there seem to be a *lot* o…

I'm ready to start this bad boy. This will be a totaL SQ install (I hope). I'm starting from scratch. The Altima is completly stock. Here are the plans... Front Stage 2-way or 3-way (if it will work) up front. Components that I'm considering are as follows: Tweets Peerless 810921 (big flange , but I think I can work with it). Vifa XT 255C5G (already have a pair) Seas 27TAFNCC (heard great things about it, but not a real big fan of aluminium tweets) Woofer Seas CA22RNX 8" Peerless SLS 830667 8" I can fit and 8" in the doors with a bit of modification. Power? Not sure yet. I'm a big fan of Zed and would love a Draconia (already have on e in the truck). I'm considering the …

If i wanted to purchase multiple subwoofers even if i didnt want the same sizes, is there a discount?

best 2 way comps in 6.5 " $500 to $1000 the set of front stage needs to be able to work off a 2 channel amp with 200 to 250 watts per channel what are you suggestions

im working on a box for two mj18s and have a few questions what size of port do i need for a box 4.5cf tune to 30hz? would there be a big dif if the box was 4 cf instead of 4.5? ( my box is 9.36cf) any building ideals or stats or thoughts would be great thanks roddy

hi all! im a college student that is sick of not being able to purchase high end audio equipment but loves music. So i did a little research and stumbled upon the mj18. I've decided to do my first DIY sealed subwoofer using a single mj18 and buttkicker amp. I do know that they recommend 2.8 cu ft for a sealed mj18, but It looks as if alot of people are using larger boxes. Since im new to this, im uncertain as to why many of you have deviated from the "recommended" size. I would greatly appreciate if you guys could give me some tips, recommndations, and possibly some box dimensions on building my first sub without using a eq. I will most likely be using 3/4 mdf or plywood.…

so it says 4.5 cu ft recommended for ported box for an mj 18. how would it affect sound and output if i was to do say...6.5 to 7 cu ft. each? tuned to 30hz? would i get more bottom end? more output? what...

i have one lying around and was going for a SQ setup. i have someone doing some work on my ported box and i was gonna make a temp sealed box. anyone have the old specs and/or box recommendations for the 05 XXX 18??? thanks

I thinkin about buyin a mag off of someone but dont know how to tell which one it is? Does it even matter which 1 it is? Does 1 have better power handling then the other or would you say they pretty much have the same? heres a pic http://img49.imageshack.us/img49/194/picture001vt3.jpg

I have 2 MTX subs and one of them is about to go out the door and blow. I have a RF 501 BD amp 500RMS@ 2ohms and a 3.4cubic foot ported enclosure for the subs. So i need 2 subs that are SVC4 or DVC2. I'm trying to keep this rather cheap but just tell me what subs would work well off about 250 rms each. Of course i prefer spl over sq but dont want the subs to sound ugly. My friend has cvrs and i want mine to sound better than those if possible, but still get loud. Suggestions: ???

Hi Everyone, The SPL 12 is complete, and while it came over and above our initial budget plans of ~$160, it also surpassed everything I was expecting an SPL driver to be. A big thanks go out to Loyd, Chad and Aaron for providing the necessary input needed to get this off the ground. As I've stated to others in the past, this is the most aggressive driver to be released by Mach 5, both in output and in cost (the cost to build this is high). I had to incur a fair bit up front for extra tooling in order to get this unit to production, but I think it will be worth the investment in the long run. Now the good news: If you want in on the ground level, I will make it MORE tha…

im rebuilding my whole setup in my 86 camaro the only thing im keeping is the Kenwood Excelon KDC-X891 deck. what would be 2 good 12's and amp 4 the hatch. i want something that hits very hard but still has great sq right now i got 2 re audio re12's in a bandpass box running off a sony 1000w amp and i want louder. i think about $1000 will be my limit 4 both subs and amp.

This is why you don't build a wall unless you know what's involved in a proper build... http://seattletimes.nwsource.com/html/loca...aralyze01e.html I know there's been a lot more cases than just this, but I got this link from another board I'm on today...with some of the posts I've seen here, it couldn't hurt...

is this sub the same as the concept PT and can some tell me more about the HC I was told there the same sub???

I was originally going to go with a fully loaded Fi BTL 18", then I came across TREO. My 18" TREO SSX came yesterday. I can't wait to install it.

Hi, I'm new to this forum, and i need some opinion, what you guys think of this setup? 4x RE Audio SE 15's in 6.7~7.0cuft Sealed Enclosure power by 2x Sundown SAZ-1500D giving them like 750wrms each. 8x RE Audio RE 6.5 Components power by 2x Sundown SAX100.2 giving them like 75-100 wrms or 1x Sundown SAX100.4 giving them like 80 wrms, I read that the RE 6.5 are rated 50wrms can they take more than that? will the 8x RE Audio RE 6.5 be enough for the 4x SE 15's? What Alternator size will be good for this setup? The ones that have experience with both MTX and RE Audio, will the 4x RE SE15's Sealed be louder than 4x MTX 7500 15's also sealed? sorry for so many questions but …

it will be going in my 350z hatch for daily in 3/4" mdf 1.5" baffle 2 each 4 " aeroports 30 hertz no carpet off about 4500 watts at 1 ohm

Hey there, I posted a topic earlier about my 68 Camaro: http://www.soundsolutionsaudio.com/forum/i...showtopic=10357 I decided to build a new sub box, ported, to try and up my bass. Next I want to replace my current speakers, they aren't the best. I am trying to keep my budget around $600-700. I went to the local Car Phonics and they suggested this setup, and quoted me $692 (including install). However, I found the same speakers on ebay for under $300 (for both) and would be perfectly comfortable installing them myself. http://mobile.jlaudio.com/products_components.php?comp_id=61 http://mobile.jlaudio.com/products_compone...php?comp_id=129 Is this a good setup for my car?…

I hate buying amps they cost so much just call me mr cheapo so if i was to buy a amp for mj18/15 what would you guys buy? (for car) what should i buy what could i get by with? would a old Pioneer GM-H100 work? (320 max) any thoughts would be great