Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
ok i have been reading back through several posts on this forum and others, and i have some questions regarding ssa subs. from what i read most people consider the icon to comparable to the fi ssd and i have seen people comparing the xcon to the q mostly a few have said its like a bl..is this pretty acurate? i was truly considering a 18 xcon but if its more toward a sq sub thats not really the way i want to go. But if its more like the bl i am more likely to order it. Still torn between a few different subs but keep coming back to thew xcon for some reason. thanks
-
2
Reputation Points
- 46 replies
- 6.3k views
- 1 follower
-
-
So I have everything but my subs and I'm killing myself trying to decide on subs! I have an Arc 2300se for sub duty, birth sheet says 1400w bridged @ 4ohms. So I'm looking for two 12s, sealed for space issues, separate sealed boxes that is. 700 watts a piece with SQ being a priority, some Xmax for output maybe, as I do like my bass and want to be able to flex my muscles. Full legatia se 3 way front stage to blend with.
-
1
Reputation Points
- 13 replies
- 1.3k views
-
-
RE's website claims 88.7dB/1w/1m SPL for the 10" SEXv2, but only 84.4dB on the 15" version. 1) Wouldn't that mean that at any given power level, the 10" would be louder? 2) That sounds unreasonable, so either I'm wrong or there's a typo? http://www.reaudio.com/products/woofers_sex_v2.php
-
1
Reputation Points
- 18 replies
- 1.8k views
- 1 follower
-
-
Has anybody used these? Interesting specs - XBL^2 motor design, copper coil, 3 shorting rings in the motor, high xmax. You can pick two of these up for $519 plus shipping(?). For car audio use they look like they ought to be good SQ subwoofers with good low end extension in the right enclosure.
-
0
Reputation Points
- 11 replies
- 3.9k views
-
-
Hey guys, so I'm looking for some pro input. Mids/Highs - EJS Audio Full Size Horns under the dash *powered by Linear Power 2202 (mod)@ 110 x 2 @ 4 ohm load. Midbass - Undecided at this point, might even be running ID8v1 or v2's in the doors *powered by Linear power 3002 (mod) @ 175 x 2 @ 4/8 ohm load. Subs - This is where I'm a little stuck. I'm trying to snag as much cone area as I can because we'll be in the trunk running two drivers. I'm probably going to be running 15's because I've got 3-5 cu ft to work with and I'll be running sealed. I know that running one driver ported will get me more output, but some music I listen to has very fast bass transit…
-
0
Reputation Points
- 14 replies
- 1.3k views
-
-
First if would like to say hi to everyone on the forum. I am 34 and have been buying stereo stuff since before i bought my first car. never got into box building or fabrication but i know a little bit about a thing or two lol. Ok my lasst set up was a single ssd 15" powered by a Memphis 400watt 2 channel amp...i know not enough juice by the us amps i had been running fried. Well i sold that a few years ago and looking into buying a new set up for my 08 gmc envoy. Its not going to be for competing unless some little punk tries being stupid and i have to show off a bit. But i am needing help on a choice. i am trying to decide between 4 different subs right now. all are du…
-
1
Reputation Points
- 5 replies
- 804 views
-
-
I have been following the V3s for a while & have emailed 2 different emails a few times. Anyone know how to preorder them or when they are coming out? I may end up going with the AB XFLs instead
-
0
Reputation Points
- 2 replies
- 2.4k views
-
-
Will a clipped signal cause the coils to run hotter and possible damage them?
-
1
Reputation Points
- 9 replies
- 979 views
-
-
Just picked up a pair in a trade. Probably going in my trailblazer. Anyone have any experience with these? I dig the lows and it's looking like I'll be tuning for 31-33Hz. Any trailblazer people have any tricks of the trade for the build? I'm thinking subs up, port back. This will be a daily on around 1k. Might chase numbers just to see, but looking for low freq performance. Triton 12″ re-7.6ohm fs-34.925hz qts-.578 qes-.650 qms-5.224 vas-1.495 sens-86.3dB SPL mms-181.594 Mounting Depth : 162mm ( 6.4 inches) Mounting Diameter : 280mm ( 11 inches) 2x 60 Oz motor, 3″ 4 layer copper coils 500 Watts rms Recommended enclosure: Sealed: 1 cubic feet Ported: 2.2…
-
1
Reputation Points
- 20 replies
- 5.5k views
-
-
How many of you run SSA subs?
-
2
Reputation Points
- 40 replies
- 5.1k views
-
-
Just bought a NIB Death Row, going to power it woth a Skar 1500. It is the 'old'(last year. I guess you would say) 1000w version. I am sure like most IA stuff these subs are conservatively rated, and it is a 'music' build. i shouldn't have to worry too much about overpowering right? I only ask cuz this is going to be my 15yo's truck next yr. I am teaching him how to use his senses(hearing/smell, and common) to not overdrive the gear, but he is a teenager.LOL On a side note- It is funny that when visually comparing to my Xcon- they are so close in all deminsions(which I realized has little to do with power handling), yet the X is rated for almost double.
-
1
Reputation Points
- 6 replies
- 991 views
-
-
Figure this is as good a time as any to beseech some of you for your opinions on the matter of trying to match a few different subwoofer choices with a couple different amplifier configurations... I just recently got a Zed Minotaur III (not II, not a typo) and am so far loving what it has done for my DC Audio Level 2 10". Even after a couple days of use, I know this is an amp I can keep in my lineup for quite some time and I've definitely been bit by the Zed bug as a result of it. Seriously the cleanest, easiest-blending bass I've come across on a modestly-powered setup. There will be plans in the future to add a Leviathan III (or IV if one is released by the time I ord…
-
1
Reputation Points
- 16 replies
- 1.2k views
-
-
I know a lot of people dont like vs threads but i couldnt help it But two subs are my favorite from the videos and reviews. Space is not an option since i will be taking my back seats out. I listen to mostly rap andi want to give the pair 3-3500 watts. which of the two will get louder and sound best? and what will be a good amp to feed them? my budget for the amp is $1900 i i know i have to upgrade my electrical.
-
0
Reputation Points
- 6 replies
- 2.4k views
-
-
What do you guys use to recone subs? I'm reconing and Xcon 12 and not sure what use to center the coil. I think I saw someone use computer paper before. If so how many sheets of paper?
-
0
Reputation Points
- 8 replies
- 890 views
-
-
what are some good ground pounder subs? i have no plans in competing i just want something that have deep bass that can go low and sound good in the process... i have 8.3 cubes where the rear seats would be in my truck. i dont want to run no more than 5500 watts. Something that love low tuning would be great and my budget is $1200 max for just subs. the size of the subs really dont matter all that much. Im just trying to get different ideas on whats out there..I will be getting a box design from ram designs as soon as i make my mind up on subs
-
1
Reputation Points
- 8 replies
- 1.6k views
-
-
I have the MOJOs right now ran by a Hifonics Brutus 2100.d. Now i know thats not enough for them but in general with a custom box and either same amp or a saz-1500, could i get a little louder with the sundown SA-12s since ill actually be putting enough power to them? Also this would be in a 2000 ford explorer, so if anyone has witnessed a similar setup with 2 sa-12s in a explorer it would be great if you give feedback. thanks
-
0
Reputation Points
- 3 replies
- 1.4k views
-
-
Its there a way you can do that? To use a different tweeter.
-
1
Reputation Points
- 11 replies
- 1.6k views
-
-
going to put 2 in my car and was wondering what you that of it and what i can expect
-
0
Reputation Points
- 3 replies
- 668 views
-
-
Never had SSA and just ordered 2 ZCON 18s. I have friends with evils and was wanting to know the difference. I know they are both monsters. Thanks.
-
2
Reputation Points
- 25 replies
- 5.4k views
-
-
How much poly fill should I add to a new sealed box Sean DeYoung has built me? The sub is a 15" gcon.
-
1
Reputation Points
- 2 replies
- 683 views
-
-
I know people always say cone area is king but which setup will have the potential to be louder in a truck. Four sa 10's ported on 3500 watts or two zv.4 12's in a fourth order with about 3500 watts
-
1
Reputation Points
- 5 replies
- 1.2k views
-
-
have any of you used this pro audio speaker i have 2 and cant wait two use them
-
0
Reputation Points
- 2 replies
- 656 views
-
-
Considering running some 6.5 or 8" woofers for mid bass under the mid seats and the center console in my Burb. Was wondering if it was omni directional...
-
1
Reputation Points
- 7 replies
- 1.8k views
-
-
I have a pair of Rockford Fosgate RFS-12"s 8 ohm. They're damn near brand new just surround glue is shot. Does anyone repair this? Also curious if anyone can beef it up? Seen a few custom made subs on them internets and was wondering if anyone specializes in this? Thanks. -Robby
-
0
Reputation Points
- 3 replies
- 755 views
-
-
So I want to do a new build with ssa subs. Current set up is a skar 1500 and a havoc 15 in 3.5 @ 33 hz. It don't not have to be louder than this just looking for some thing different. I have about 8 cubes of space. I'm border line for stock electrical but do have a xs2400 on the way. Goals are daily but I would like a pretty flat response like killing the lows. Maybe 2 15 dcons amp turned down of course or a xcon 18.
-
1
Reputation Points
- 70 replies
- 5k views
-
Who's Online (See full list)
- There are no registered users currently online