Subwoofers / Speakers

If you have 750 to spend on subs what would you get?

Alright so I decided to go for the two Sundown E series 12" subwoofers rather than the SA series 15" subwoofer. I was told and thought the answer was reasonable, that two 12" E series will have better SQ and SPL than a single SA series 15" sub. I was wondering if anyone had them(The E series 12's), and would recommend a certain Ported enclosure size, I'm going to use Aero Ports... My max dimensions are 14h x 34w x 20d. I don't want to go any bigger, I'd enjoy a little wiggle room in my trunk. Height and Width are maxed, Depth can be extended quite a bit. I'm thinking of tuning my box to around 30-35Hz. Has anyone had these subs in a ported enclosure, can you give me fee…

Can anyone give me info on the 12" bl's dual twos? What kind of max cottage for a burp at half ohm, break in time, etc. Plz help!!!!

I just had a mtx 9512-44 go out on me. Pretty sure it's the voice coils. I've had it for nine years (and its taken many trophies) do u guys know if mtx will repair it? Already ordered fi bl's to take its place, but would still like to have this sub. Sentimental value I guess.

I have Scan-Speak Discovery D2608/9130 in mdf rings mounted to my dash and windshield with double sided tape. One of them came off the dash on a hot day. When I picked it up I realized the double magnets aren't glued together anymore. Here are some pics. Can I just clean up the surfaces with some denatured alcohol, apply some CA glue and clamp the magnet back together?

Well i'm looking at three different brand and would greatly appreciate everyones input on what yall think. Also i plan on running 3 of them in a 95 cadillac deville and i'm wanting 12 first i'm looking at- FI BL with hyper pole and cooling running dual 1ohm second- PSI platform 2 dual 1ohm third- ssa icon dual 1ohm Once again thank you for all imput

Yes I have a audiopipe 1800 watt amp and 2 12" alpine type r subs the are 1800 watts peak and 600 watts rms at 2 ohm and I was told this amp was to powerful for my subs just need help in adjusting the leveles so I don't blow them any suggestions or help I highly appricate it thanks

So i was thinking of 2 15's fi bl but it seems i will not be able to build the proper box. Don't want to spend money on good subs just for the box to be crap. So i was thinking of 12's. What do i suffer from by getting 2 12's?

does anybody have any experience with the RF pro audios? i'm thinking about getting the 6.5's and 8's to put in the Hummer. anybody have any better ideas for pro audio mids? i've been back and forth with a few different companys, but i think for the price these look pretty decent.

hey guys, im just curious to know everyones thoughts on the sundown sa8 v2s. pros and cons of the sub and does anyone know if there is a sa10 v2 in the making?

I'm still tossing ideas around and was wondering which would work best in the space I have. I have 44"w X 30"d X 18"h to work with could be a little taller but was hoping to keep it close to 18" or less. I was wondering if 2 gcon 15"s would have more output than 1 18" icon. I'm pretty sure I'm going to run a crescendo bc 2000d at 2 ohms. What do you guys think would have more output? It will be in a 03 ford explorer.

first off i havent been on this forum in a while but im looking for a new setup soon and getting back into the scene. so anyway i sold my friend my fi bl 15 in a 3.4 cu.ft. box tuned to i think 30hz. i had it in the trunk of my 95 civic running off of a sundown sae-1200D and it sounded good and hit pretty low. once i installed it in my friends late model malibu it was running off a sundown saz-1000D it honestly didnt sound to good at all. so he is looking for more and he wants 2 15's but i told him its not gonna fit, so i suggested a single fi btl n2 12 or maybe 2 bl 12's, hes not rich so his buget isnt to big. any suggestions would be great thanks!

My question is can i use 14g wire to make My subs 2ohm?Then run 12g wire from the Sub to the amp?

So I'm looking to buy a pair of 12 inch mid range speakers for my van. Any suggestions? I was looking at the Mtx rtx128 and the O2 Oxygen OM12120.

Would love to hear what you guys think of this http://www.madisoundspeakerstore.com/auto-kits/hi-vi-d630-3-way-autosound-system/

Whats going on .. So I just wired my xcon 15 back up today noticed a slight coil noise... Anyone close to south Chicago for a recone.. Or anyone do any thing nice with the xcons besides psi ... And has anyone reconed through ssa if so wondering around how long I'll be waiting for it to come back thanks

I am Thinking about reverse mounting 2 FI BL 12's and was looking at some researcha bout wiring and reverse polarity and what not. When i mount them in reverse should i reverse the polarity aswell? ???

i am about to buy this little monster read good reviews on it but also looking for a good amp to pair with it

Hi guys I have been looking at these little guys for awhile and have thought about running them in my 03 ford explorer behind the third row seats. At first I thought about running them off a sundown sax 1200d but now I have come across this website and discovered crescendo audio and seen the bc 2000d and love the way it looks and its a little cheaper. I was just wondering if these little beast would hold up or am I better off running the sax 1200d?

Hey just wondering what you guys would set your subsonic and lowpass filters to. I listen to all types of music and would just like to get some more output on songs other than rap. Just wondering where i should go i think i am at like 80 on low pass and 35 on subsonic. Thanks

I am trying to decide which way to go I know both company and subs are of the best quality just can't decide. So I'm coming to great group of guys for help. I will be running a BC5500 and I want four 15. I want loud but clean. I've had a sundown nightshade z 18, a dd9515, skar vvx 15s just to give you some of the other systems I've ran. I like the dd9515 control and loudness but nothing rocked the jeep like the nightshade but it missed alot of notes. I want the love child of this two subs. Thanks for your advice.

I've heard as a general rule to have at least 12in^2 of port per cubic ft. Is this solely to keep port noise down? Reason I ask is because a box size I've tinkered around with for my next build has 8.5-10in^2, yet in Winisd Pro it shows to only have a port velocity of about 60 ft/s. I've heard anything under 100ft/s is fine. Am I missing something? Facts wrong maybe?

I'm looking for a good component set to pair up with my SSA Xcon 10 for my 350z! The doors have 6.5" speaker sizes, but I've also found custom door panels made for 2 speakers (looks like a 6.5" and a 5") Link - http://www.wickedcas.com/gallery/v/wcasdesign/Cutomdoors/100_0968small.jpg.html I'm planning to get the RF 600.4 amp so I'd be looking for something around the 150rms range -Kyle

I am wanting to get some scoops from people that have heard or experienced these first hand.... none of that well on youtube BS I am curious as to what your ears heard about these

It seems like I need to build a new box for the BMW cabrio install I fixed. The car currently has a shitty ported box, which fires towards the back in a "tub" formed by a cosmetic fiberglass panel. Port fires to the front, into the ski port. Sub orientation has to stay as it is now, I don't want to build that cosmetic fiberglass panel. The main goal is to have a loud'ish sounding setup when the hardtop is off, trunk open and closed and something that can put up a half-decent score with the hardtop on. My first idea was to seal up the sub against the cosmetic FG panel as good as I can, use that as the sealed chamber of a bandpass box and have the ported chamber fire throug…