Subwoofers / Speakers

http://www.woofervids.com/displayimage.php...up&cat=38&pos=0 check it out guys The H/U was on LOUD, gain full, bass boost full ( clipped ) Couldnt find my tone CD so i used an old bass track from a mix CD

Does any of Soundsplinter woofers offer this?

Hey guys! I received my Hovoc 15's 2 days (Thanks you Brian) ago and installed them yesterday. DAMN!!!! Thats all I can say lol. I had 2 Diamond Audio d3 previously and they were great. They hit pretty hard but didnt hit the lows hard enough for me. I had a Mmats 2000.1 amp powering both subs and the d3's couldnt handle it when cracked up, they started to smell like smoke after playing them hard and long. Overall they are great entry level subs, nice quality, and they hit hard. now for the havocs, out the box I knew these things was going to be a beast, and they are. After I installed them I rode around for a couple of hours just playing different songs and instantly thes…

hi, i was looking at new componots and i was looking on ebay and i can get a set of diamond audio hex s600 for 200 bucks and i am wondering if anyone has anything bad to say about them. i know people are going to say go and listen to them but no one sells diamond local where i live. so i hear they sound good but that is all i hear about them.

Thinking of getting 2 sets of Diamond Audio's s600s (6.5" comp with the silk tweet). How is the mid bass and how well does this set take that 170rms rating? Looking to keep up with 2-BTL12s. One set in the doors and the other in the kicks. Both pairs of woofers would be sealed in its own glassed enclosure just big enough to fit the woofer.

i was wonderin if i should get the diamond audio speakers or the type r's. any recommendations? i wont be usin a amp right away but ill get one like a month after i get the speakers. an i listen to rap.

What do you guys think of Diamond audio for component 6 1/2'' s? Also about there 12'' subs?

Hey everyone, Had some diamond d612's when i got out of the game. It looks as if diamond audio has fallen off the map unfortunatly, so i am having trouble finding a set of new d9's. Everyone has recommend the ssa xcon which looks to be a great sub. The reason for posting is i like for them to get loud and my wife likes for them to be accurate. Is it safe to assume the xcon can do this? I bring up diamond just because i know from experience they will do both and do them well. Any ideas or comments? They will be 2 12s running in trunk of buick regal powered by an rf-t1500bdcp per sub.

I have been doing tons of searching here and on other forums as I try to figure out exactly what I want to go into my next build. My question here is on subs. I have it narrowed down to three choices(til someone decides to throw something else into the mix). Diamond Audio D6, Fi Q, and SSA ICON. I will be using 2 15" drivers in an ex cab ranger. Most likely sealed at about 5 cubes. They will be seeing 1800rms from a T1500-1BD. I like it loud and clear. Tight and accurate all the way down to 40hz and lower. I like flat response, not too crazy peaky(except some hip-hop). I listen to anything, mostly rock though. I am looking to see if anyone can compare the Diamonds to the…

I put 2 12" Lethal Injections in a custom 4.25^3ft. @ 35Hz box. Hifonics 1608d 1100w @ 2ohms. Set the amp to 43v with a 45Hz tone. At first I forgot to screw them down so they were bouncing all over at full power before I realized it. The lows sound good and loud but the bass kicks don't pound like they should. how can I test them.

so i traded my pair of treo te 15's dual4ohms that i have beatin within an inch of there lives for a 2 week old fosgate t2 12 dual 2ohm that aint even broke in . but i got just the sub cause he didnt wanna come off his enclosure he paid $400 for so i gotta build an enclosure. so did i make an ok trade? this beast weighs as much as both 15's did in the box

He He. Big thanks to Aaron!! Mark, I must say, you really outdo yourself. A $20 driver that performs like drivers five times the cost AND you have the audacity to include form fitting grills AND hardware. Mach 5 Audio, the pinnacle of the poor man's music! being broke never sounded so good. Now, on to the goodies. What is this mess on my driver?

I just ordered two Fi Q 15"s and i'm taking the 2 15"kicker cvx's out! My amp is the memphis 2500 or (Mojo) my car is a 97 honda civic... ok to the point will the Fi's be louder than the Cvx's in a big sealed box...ported is not really an option for me cause i'm leaning more towards a flatter response on low end and more towards sq!! but will the Q's still be louder than the Cvx's??? the box is 2.4 cub.ft per chamber! I know that your input on loud would be a ported box....but sealed which will be Louder?? Thank you

Well, after further examination, one of my SPL 12's is completely trashed. 2 of the tinsel leads are burnt and the surround almost came loose from the frame. Some slight tearing is obvious on the surround and the coil was somehow misaligned, you'll see in the pictures where it managed to rub against the pole piece and the coil gap. hey Mark, looks like I'll need some recones in the future Just some advice, don't paint the inside of the basket where the soft parts are mounted. The glue on the spiders and surround were coming loose. It was too easy to take the soft parts off. Even though these subs were beaten pretty hard, the SPL series is one of my favorite seri…

Parts Express carries Morel? For a decent price too!!! http://www.partsexpress.com/webpage.cfm?&D...id=46&rak=morel

what are the differances if any of the old mj18 and the new mj18m?

besides diff prices on the amps, would the 1st way (wiring them in parallel AND series) affect the speakers any? #1 #2

Alright so I have had my 18" fi ssd for about a year and want to upgrade, A guy locally on c-list is selling a 12" Fi BTL and I thought about buying that as an upgrade to my 18" ssd.. Question is, will i really gain much from this upgrade? I believe it is a new btl n2 series 12". Since my current sub is an 18" and tuned to 32hz it hits pretty freaking loud and low, So im just trying to see if any of you with more experience in different subs know if it will be noticeably louder?? its only a 12? Currently I am running a Sundown SAX-1200d but i could also sell that/trade for an AQ2200 if needed to get more power for the btl if it will even help or make a difference. I just…

I have narrowed my selection down to the dayton rss woofers and either the Fi x10 or dcon 10. I would just like to know what the differances between the Fi and x would be? I know the Fi is rated a little higher power handling but that is really not important to me. I have heard the dcon is a pretty good SQ driver, is the X also? I'm not concerned with which will be louder, because I think these two 10's would be pretty close. Also would like to know if they would play up to around 80hz or so without rolling off real quickly. Anyone with any insight to these two woofers your comments would be appreciated. Tony Nelson

I have 2 Rockford Fosgate rfr3110's and Im planning on building a ported box for them both but I want to know the difference between separating the 2 subs to one sub per chamber (2 ft^3) with 1 square port each OR having both subs in the same chamber (4^ft3) with 2 same sized ports. Basically, I have the size and dimensions of the box ready to draw up, but should I have a divider between the 2 subs in the box?

I am going to order a new Fi BL 15 and I noticed there is a new option to choose between a 4" and 3" coil. What is the difference and which will I want for my daily setup.

Okay guys, I hear you all talk about active and passive front stages all the time, but I don't know the difference between the two. I am tired of not knowing and finally worked up the courage to ask. I hope I'm not made fun of or anything for it!

I have always wonder this, exactly what is the difference between these different speaker configurations. I want to know the difference, well the reason behind the following. Two-Way speaker Three-Way speaker Four-Way speaker Would like to know the Purpose, Pros/Cons of said above. Also, would appreciate some shed of light comparing this/these to an active or passive setup. For example, I know some people decide to buy a woofer for midbass/midrange purposes and company it with a tweeter. Ok, that makes sense to me. So in essense, is that what a "Two-Way" speaker is trying to accomplish? Taking that idea, do I apply the same principle for Three-Way and Four way? Where as …

so ive been recently looking at two subs the fi ssd and ascendant audio arsenal both 12" what is the big difference between these two? i know that the fi take 800wts and the arsenal 500wts and their mounting depths are close.