Argent Audio

well i tried getting this guy to do a box on my ssa icons i gave him the down payment to start the build when the box was done he told me that he has been trying to notify me that i was and i wouldnt respond. i gave him my paypal to finish off the deal but he never sent the invoice so that i could pay him, so i guess he gave up on me, so maybe 2nd guess this guy in my opinion, i never recieved a email about the enclosure being finished and then ignoring my emails that i was ready to pay, 59 dollars down the drain...

While Argent Audio waits for its first shipment of Argent brand mobile drivers, we are going be getting shipments of Aura NS 12's. The Aura NS 12 is a SQ driver that works well in both ported and sealed enclosures. They are able to perform great in both car audio and home theater applications. We will also be offering enclosures for these drivers. (I am emailing back and forth with Aura on what enclosure size is best for these drivers) http://www.aurasound.com/hi-fi-home-theater.html NS12-794-4A We will be ordering them in a week, from that date it will wake 3 weeks to receive them. The price is $412 per driver plus shipping. (50% upfront, 50% when shipped) Andrew …

Tried emailing you a couple times but just figured to post it up on here. Vehicle Make and Model: 1992 Mercedes 190E Direct of Box/Subs: Sub back, port driver side Sealed or Ported: Ported (aeroport) Number of Subs: 1 Brand and Model of Subs: Sundown SA-12 D2 Max Dimensions: 32w x 14d x 14h Zip Code for Shipping Quote: 94015 Any other notes: 1.5 cubes @ 35hz. Double baffle. Can I get two quotes, one for a bare box (no carpet) and the other for the whole outside of the enclosure painted flat black. For sub/port orientation if you have a better idea to go with, there is a rear firewall and gas tank between the trunk and rear seats but there is an opening in the rear deck fo…

More pics coming, I just have to upload them. Andrew

I sent an email a little while ago, but I figured I'd go ahead and start a thread since I didn't see any hatch enclosures in here. I'm looking at getting a single 10" Dcon and need a semi-custom box built since the rear seats in the car are angled. My car is a 2005 WRX Wagon and I would like the box to rest against the rear seats in the trunk, with the sub facing the rear. I would like to keep as much trunk space as possible, while getting the most out of the sub at the same time. I would like flush mount, and possibly a double baffle (though honestly I have no clue what benefit this gives). I'm still debating on carpet since I love the rounded corner look. Here are …

Sorry about the low update on the build logs. Stuff has been busy getting the CNC ready Single FI BTL, plexi window, double baffle, flush mount. There is more progress I just have not taken any pictures yet. Andrew

Hi, I'm planning on purchasing a nightshade v2 in the upcoming few weeks and would like to get the ball rolling on a box (hopefully pick up the 10% june discount too?). I'm picking the nightshade since they seems to like the smaller boxes in the 1.5 to 2.00 cuft range. Ideal tunning would probably be something in the 30-32hz range since I really mostly listen to hiphop and I can't sacrifice my lows too much, lol. I still need to have a good part of the trunk still since I do use it for other stuff. Can I get a quote on a box and a possible design?(I don't mind paying something before I see it if that's the way you do it) I also would like to use Areo ports if possible sin…

Sorry guys, built this one too fast. No progress pics, just completed ones with the port and ring painted. Carpet tomorrow and he is local so he is coming to pick it up Friday or Sat. Andrew

Vehicle Make and Model: 05 Acura TL Direct of Box/Subs: Facing Cabin Sealed or Ported: Ported Number of Subs: 1 Brand and Model of Subs: SSA XCON 12 Max Dimensions: Dont know but I dont mind using trunk space Port Color: Black Flush Mount Ring Color (if flush mount is chosen): Black Carpet Color: Black Zip Code for Shipping Quote: 21093 Double Baffle Wooden Dowel Bracing Please let me know ASAP !

hi there, i got a DCON 1054 10" 300w single 4ohm sub and i wonder if u can build me a box. i'm new here so please give me some advise on the box volume etc. i want to have a sound quality setting Vehicle Make and Model:2011 accord lx p sedan Direct of Box/Subs:sub facing front Sealed or Ported:need opinion please Number of Subs: 1 Brand and Model of Subs: DCON 1054 SSA 10" 300W single 4ohm Max Dimensions:trying to save as much trunk space as possible Port Color:?? Flush Mount Ring Color (if flush mount is chosen): Carpet Color: charcoal grey Zip Code for Shipping Quote: 92630 Thanks robert

The subs remain a surprise till later this weekend. We have 10.239 cubes @ 30.3 Hz. These things like large ported and sealed enclosures tuned very low. I decided to do the double flare for fun I had some spare 1 inch MDF left over so I'm going to use that for the baffle with a piece of .75 for the flush mount which is going to bring the total height to 22 inches which is perfect for the seat line of my Tahoe. On to the pics! Andrew

Vehicle Make and Model: 1998 Ford Explorer Direct of Box/Subs: Subs up, port towards drivers side. Sealed or Ported: Ported Number of Subs: 2 Brand and Model of Subs: Sundown Audio SA-12 Max Dimensions: 38 in. width, 18in. height, depth shouldn't be an issue (plus I forgot the measurement haha) Zip Code for Shipping Quote: 76708 Hey, I have a few special requests...I listen to a lot of slowed music (decaf etc.) and love bass around 27-35 hertz so I would like for the box to be tuned a little lower than what Jacob recommends. Probably 26, but whatever gives me the most balanced response and can still dominate between 27-35. I've experimented and found that when the ports a…

Would like to welcome Argent Audio to the SSA forum umbrella and wish the best to them with their new section. Welcome

Fisher Customs, had some shipping issue to my area according to their site.... Audible Customs had a taxing issue within our state, so then I rushed and got a shop to build a box. The box they built was 200 dollars, and it didn't fit by inches... but they went by the specs I gave them... so I was the one in fault. I really need this box, and after seeing a post about another box being 170 shipped.. that sounded nice. I need it to fit my 09 Charger SXT... if you've had any experience with Chargers that would be cool to tell me ( so I know you have an idea of what you're working with... I can still get measurements. The last box I had went by the dimensions of the smaller i…

Getting started. A lot more to come tomorrow Andrew

Vehicle Make and Model: 1999 Volkswagen Passat Sealed or Ported:Ported Number of Subs:2 Brand and Model of Subs:12"SSA DCON Max Dimensions:42.5 inch across 20 inch high 32 from back of seat to end of trunk Port Color: Red Painted Black Zip Code for Shipping Quote:02886 Any other notes:I would like it flush mounted @ 28-33hz double baffle, 45's in the corners, rounded edges Thanks in advance.

Vehicle Make and Model: 2008 Jeep Grand Cherokee Direct of Box/Subs: Subs facing up and port facing rear Sealed or Ported: Ported Number of Subs: (2) two Brand and Model of Subs: SSA ZCONs Max Dimensions: 43w x 22h x 18d Port Color: Flush Mount Ring Color (if flush mount is chosen): Carpet Color: See note below. Zip Code for Shipping Quote: 20146 Any other notes: Please give me a quote for a bare box, black carpet and rhino line typ material/pain (if you have it). I am looking for a loud setup for my daily driver. I am looking to get a new box that is between 3-3.25ft^3 per sub (which is the ported optimal specs for the ZCONS) and tuned somewhere between 31-37hz (wh…

I was thinking about you guys building me a box for 2 Fi BL 15's. I was thinking 7.5 cubes with a flush port, plexi glass, carpet, and tuned to 34Hz. I wouldn't have to pay shipping because i'm willing to pick the box up since i live in so cal. So how much would this cost?

4 icons downfiring, ~7.6cuft, 33hz tuning, 4 12" icons double baffle, extra dowel bracing. carpeted. shipped to 85715 Thanks Andrew

Small, Sweet and Simple. He is going to pick it up this weekend when he comes up from LA. Andrew

Flush mount, bracing etc coming tomorrow. Andrew

I'm interested in having a box built for a Fi 15" loaded BTL 15. Never had a box designed for me so I'm a little ignorant to all of this. I'm thinking 4 cu ft ported tuned to 34 hz. Just a regular rectangle, carpeted box that will go in the back of my Tahoe. Unfortunatly I can't see pictures on the computers over here (I'm stuck in the middle east for a few months) but the reviews I've read seem pretty good. Can you help a brother out?

Here it is, officially live. This is the new Argent Site that Andrew and I have worked a lot to get to this stage. We will ad the information to the missing parts as time goes one. Anyways, with out further ado.... Argent Audio - Quality Drivers and Enclosures

Wondering what you'll quote me at for a ported box its in a 2005 4runner. I'm thinking something in the range of 2.0 ^3 at 33hz where ever the sub faces or where the port point is at your suggestion.

Getting started, I will update more in a bit here. Working on this one right now. Andrew