Leaderboard

People are so impatient these days.

Email me your name and all of your information to Nick " at " ficaraudio.com and I will look and find out today. There are a few people that we have to call to go over things because the tinsel leads were burnt up and go over their installs. I am sure that you were in that stack of people that we simply have not had time yet to call due to this being the busiest time of year through December and with CES being last week. Relax, you're in good hands. Sometimes it takes us longer to do things than projected.

I have not personally used any of these products. But the general consensus is the resin made for marine use is not as brittle, and has a little give if thats what you are concerned about. As far as the fiberglass, use the woven cloth and do it with one piece when possible as AC guy said. I also recommend the "gold bondo" if possible, but no neccesary. I know AC dude does this for a living but I honestly thing he is over thinking it. Use the resin and bondo you can find locally and go for it. This is my favorite quote for the AC guy in your link " ...And it's not about craftmanship. A trained monkey can do it. it is all about the proper tools and the proper knowlede." I SOOOO disagree, Its all about craftmanship and having a plan before starting. KNOW your control points, only worry about your control points, and don't fiddle fuck with the plan out of inpatience. ONLY worry about your control points. Next is a quote from you "...Yeah I soaked the cloth in resin, then cut strips of fiberglass mat and placed them everywhere, then dabbed them with a brush til they soaked the resin, then waited about 15 minutes and did another layer of mat and resin." I suggest having your single piece of woven cloth cut roughly to size(always alittle big), then resin the pod first, lay the woven mat on the pod, then finish by brushing more resin over the woven cloth. DO NOT do another layer of woven cloth or resin until first resin is dry. I used two pieces on each pod and just delt with the minor little seam via bondo. My dash pods in there too. These where my last pods I built for the 10"s. I have a different setup now with the 12"s. I just need to sell these one's to someone wanting 10"s in their Honda.

SPEAKER SYSTEMS LIMITED WARRANTY Fi Car Audio warrants this product* to be free from defects in material and workmanship under normal use for a period of 1 year from date of original purchase with receipt. In all cases you must have the original receipt! Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, Fi Car Audio will repair (at its discretion) the defective merchandise at no charge. This warranty is valid only for the ORIGINAL PURCHASER and is not extended to owners of the product subsequent to the original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have other rights that vary from state to state. WHAT TO DO IF YOU NEED WARRANTY OR SERVICE KEEP ALL PACKAGING MATERIALS. Speakers not returned in their original packaging will be charged a repackaging fee when they are repaired and returned. Defective merchandise should be returned to Fi Car Audio for warranty. Please contact the sales department at [email protected] for a Return Authorization (RMA) number. Package all defective items in the original container or in a package that will prevent shipping damage. Failure to return the merchandise in its original packaging will result in a new packaging/handling charge being processed at the time the product is shipped back to you. The RMA number must be clearly marked on the outside of the package. Freight must be prepaid; items sent freight collect, or COD, will be refused. If the product sent for warranty service is found defective under our warranty policy, we will return the product freight prepaid to you. If the product is not covered under warranty, you will be notified of the repair and shipping costs and said costs must be paid before any service is made on the product. Failure to follow these steps may void your warranty. Any questions can be directed to the sales department. WHAT IS NOT COVERED? This warranty is valid only if the product is used for the purpose for which it was designed. *DUE TO THE EXTREME NATURE OF ITS INTENDED USAGE, THE BTL SERIES OF SUBWOOFERS HAS NO WARRANTY COVERAGE (outside of arriving in proper working condition after shipping) It does not cover: Damage due to improper installation. Subsequent damage to other components. Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation. Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage will be considered abuse. Any cost or expense related to the removal or reinstallation of product. Speakers damaged due to amplifier clipping or distortion. Burnt or open voice coils. Ripped, torn, or burnt spiders, lead wire, cones, or surrounds. Items previously repaired or modified by any unauthorized repair facility. Return shipping on non-defective items. Products returned without a Return Authorization (RMA) number. Freight Damage. The cost of shipping products to FI Car Audio. Service performed by anyone other than Fi Car Audio or an affiliated repair facility. HOW LONG WILL IT TAKE? Fi Car Audio strives to diagnose and repair products as quickly as possible. Normal turn around time for repairs is 5-7 business days. WARNING! Fi Car Audio products are capable of producing sound levels that can permanently damage your hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your hearing. Please use common sense when controlling volume!

I think I saw a cap

Doesn't sound like a warranty claim to me. Warranties cover defects in manufacturing or craftsmanship, not user error.

Looks crazy Bro! Great idea on the breast cancer awareness! Save the titties!!!!!

Very cool man!

How loud does the setup need to be? I once managed a 137dB on a termlab. Is that loud enough so I don't melt the subwoofer?