Leaderboard

no doubt if you ask him a technical question you will be ignored... and if you ask on a public place other then SSA your post will be deleted !

Yes, correct. I don't know whats going on with Skar Audio, but if this is how they are going to support or lack thereof, days for them are numbered. Sad. You will never get accurate specs from skar. Kevin has posted specs on ither products, but they were proven very wrong.

Do not ever post AQ and anything built by Fi in the same debatable topic again.

I will say this. I have never dealt with Skar, never ran any of their equipment and probably never will honestly. But this thread does seem awfully blown up to be from not returning phone calls or emails. FI does this all the time. LOL Of coarse the equipment doesnt even compare and with FI you get a great product but........... That is all. Carry on

Meanwhile, in Romania

I kind of like SSAs skar section. It is the only place on the web that potential buyers can see the truth.

Hey Aaron, how come there is a skar section if he has sketchy business practices and posts useless incorrect info?

There is a signifigant problem with your logic there. The reason you were able to play your HDC3's without a subsonic filter on is because they have a very short coil, there is not enough coil length to cause a suspension failure like that. Your BTL had a very long coil, that is why you were able to rip a lead wire; the coil is able to push the suspension that far if you let it; especially with a sub sonic filter set too low.

Well, my foray into porting looks like this: Before: Intake short side radius Exhaust short side radius After: Intake short side radius: Exhaust short side radius: Granted it was just a clean-up of the extra lips and small casting defects but it looks a billion times better after going with 60 grit sandpaper with the dremel then 180 by hand.

I kind of feel bad for Kevin. He may be overwhelmed and just can't run his business well enough to satisfy all. Also if you are going to be in this business, have your specs accurate for customers.

How not to run a business = Skar. Noticed he is ignoring even one of his followers in this thread, to instead promote a new line of earbuds?? Sign me up for some skar running shoes, I will need some new skar truck tires soon, maybe even some new skar trash bags.

Can't wait to set in this machine with my SQ disc ... See you soon

I asked him a question on one of his youtube videos and he deleted my comment and went on with his BS.

I love threads like this. Shitty business practices should get no respect. This should just be a huge hate thread like the Ben Milne Love Parade from SIN. Those guys were harsh over there in those days. Sometimes I wish all forums had some assholes like that. Get rid of the skum. Burn Baby Burn! Fuck Skar.

That doesn't happen here anymore. He abused his privileges and then they were taken from him.

I love it when Skar introduces a new product or updates it with info on here, becuase you guys just tear the guy apart lol it's hilarious. I don't know why he would post incorrect info when he knows right away you guys will point out everything that's wrong.

That ^ right there would yeild, either no response or a run around, and even if you get it, you can't trust that it's true. Typical Skar !

I'm surprised no one's posted these parts express beauties: Or it's heavy weight brother: Keep calm and carry on.

I got 1" tweeters cause theres a spot in my door for them to replace the factory I have no intentions of running the 4x6 as a midrange Im running two hifonics brz1200 on two lanzar opti1232D so trying to use the 4x6 as a midrange would be silly, I know this My OP is the whats the best way to wire these speakers to my amp without seeing magic smoke from mismatched impendance or anything else Not SQ guesses, thanks tho I still dont know if the crossovers that come with the tweeters suffice as a passive crossover? if running a tweet and 4x6 parallel, does it matter which speaker i wire first to the amp? should i be like fuck stereo and seperate them because of impendance diff? Idk the impendance on either the tweet or 4x6 -ty What else will the 4x6" be beyond a midrange/highend speaker? The crossovers that came with it are just that, crossovers, stopping bass from getting to your tweeters. No, just as long as they are both connected you will be fine. And hell no!! Run stereo, the ohm load will work out to 2ohm stereo which the amp is perfectly capable of doing.

how so All of the other forums are having some very uneducated debates about the Evil, it's cost, and SSA in general.

If the smd dumps so will this both made by the same company so kinda a pointless statement their. True, its almost as dumb as your initial post in this thread.

I have ordered a lot of stuff from SSA, and I know that it is hard to wait but it is worth it. I would rather wait for an awesome product coming from a company with honest and hard working owners than receive something quickly that isn't up to par. You guys will be happy once your stuff arrives!

I'm in the middle of doing a wall with 6 li 15's D2. They will be going on two 20.1's at 1.33 final load on each amp. If you can find one large amp you can wire all 6 subs down to 1.33

You can afford six LI's but not a $700 amp? I would just buy an amp you can afford and run it until you can justify a larger one.

People who have donated: -bigjon, SSA -Chris James, local -The Ewert Family, local -dtrom, caraudio.com -taylorfade, caraudio.com -ricksi30, SSA -RARECRX, caraudio.com -nem, SSA -On3Hundr3dProof, SSA -DanP, SSA -pmureika, SSA -The Molter family, local -Jes 42, caraudio.com -E-Rock, caraudio.com -ELDeFontes, SSA -ParrishTechGroup, CA-F -Anne & Gale Stephens, local -Bromo, SSA -Andrea DeYoung, local -Feliciano Godoy, http://www.facebook.com/caraudioadvice -monstermack, SSA -azagtoth502, SSA -Adrian 3.0, SSA -frostedflakejake, SSA -AXEHAMMER, SSA -Jim Wise, local -///M5, SSA -Sencheezy, SSA -Impious, SSA -MemphisMzd, SSA -watts09, SSA -Mr. and Mrs. Duran Adams, SSA -redrider, caraudio.com -ramteid, SSA -Mitch86, caraudio.com -suicideking602, SSA -Snapper_Slapper, caraudio.com -only126db, SSA -lithium, SSA -joom, caraudio.com -Boomsday, caraudio.com -40oz, SSA -Tirefryr, SSA

Well, i'm not Aaron but even though past history is past history, since the vendor section has been created, there, to my knowledge, hasn't been multiple scenarios where there was no resolution to problems or extreme delays in situations. Remember when DC Power was here? One guy waited for 2yrs for a custom project.. Both sides of the story hasn't even been told yet.. You must be unbiased for all situations regardless of your opinion of one company to another.

I don't know if it is pointless. Bill just wants Kevin to do what he says he is going to do. Bill gave Kevin a chance and wants to do another build with skar products, but when Bill ask for technical info he feels he is being ignored. I hear ya. Side note, you should email Jacob for tech info on skar drivers ;)/> Lol, i've pulled out my crescendo manuals before to help people with wiring diagrams for their sundown amps.

I don't know if it is pointless. Bill just wants Kevin to do what he says he is going to do. Bill gave Kevin a chance and wants to do another build with skar products, but when Bill ask for technical info he feels he is being ignored. I hear ya. Side note, you should email Jacob for tech info on skar drivers

I don't know if it is pointless. Bill just wants Kevin to do what he says he is going to do. Bill gave Kevin a chance and wants to do another build with skar products, but when Bill ask for technical info he feels he is being ignored.

Well not many people here like skar lol. But shit happens. honestly seems like a pointless post... thought specs were posted up online?

Can't say that I'm surprised either...

not a surprise,

What about a 12v setup, any test done at that voltage?