Leaderboard

Right off the top of my head standard inductance is 4mH, so figure it'l be lower than that with the ring. Xmech off the top of my head is around 40mm, but you run out of surround at 32mm, and xmax is 27mm which is the breaking point of linearity...I wouldn't push them past xmax as things start to lock up and you'll be buying stock in recones.

Contact Crescendo then.

I have used dcons, gcons,icons,xcons & now my first zcon. This is one beast of a sub. You can't beat it for sq or spl in this price range. Thanks SSA!!!!!!!!!!!!

Glad everything got there safely. I cannot wait to see everything assembled Thank you for the kind words. Look forward to building more things for you in the future

Please try emailing sales @ crescendoaudio.com

Sean packed everything so well, it took me and Arthur a solid 20 minutes to free the enclosure/baffles/towers from the cocoon of bubble wrap and foam. He was super generous and sent some gasket tape and a load of extra connectors that I am low/out of, to assemble this project. The paint on the towers and sub enclosure looks even better in person. The work on all the parts is VERY good, especially for a one of one and from someone who does not do it professionally. I will be sending Sean a non-compete contract so I can have him continue to build for just me since I no longer had the space to build enclosures. No way on this planet could I have ordered a kit from Madisound or PE for 1/2 this price. Calling this a little bedroom set-up is understating it. If I don't screw up the build, this could easily be more of a lower power, full blown home audio set up. Which is perfect for me, as I am keeping my possession foot print as small as I can, as I might move again soon. (Still slowly purging audio from the pyramid) Only thing, which is my fault, is we went with the amp cut out dimensions PE provided for the plate amp. I should have called PE to double check, but I guess I was just slammed at the moment Sean wanted to double check and I just assumed the website would be correct. So about 1-3/4" - 2" need to be added to the height of the cut out.

Keep up? No way. Satisfy your buddy, most likely.

Meh....

In b4. Lock.

Showing a little windshield flex.

This was the preorder. http://www.caraudioclassifieds.org/forum/general-car-audio-discussion-questions/148555-official-presale-new-hd-series-mids-highs.html Facebook. https://www.facebook.com/pages/Team-Tantric-Sounds/296028627084611?fref=ts Thanks. They last a long time. I need to rotate them bad though.

Two different circumstances. SSA is hand built to order in the USA, everyone knows this. When you buy stuff overseas in a big box, there should be no issues. IMO, they should not offer product they do not have to sell. Buyers take a risk on the preorder, so if you get burned, it's your own fault. There should be no complaining.

it will help it from moving what you should have done is get MLV and put it there.. it will stop the rattle and really help... my doors have the stick and peal kinda second skin and also a blanket of the MLV between the door panel and the door skin

Still a work in progress!

wow, I ordered a box from Dave the box guy 6 weeks ago and still haven't gotten anything. if I would of known it was going to take this long I would have gotten one of these

sweeeet.. just make sure you go with optimal space or larger