Leaderboard

I don't do this often but here are 3 plots for the 10" Dcon top is 2.50cf3 middle is 2.0cf3 and bottom is 1.5cf3 ...all tuned at 33hz bottom lines are woofer excursion

The only way to run this amp with those 6x9's worthwhile is to go to the amp and set the filter for the channels you are using to "OFF" and use the ones on your headunit. The only thing your amplifier should be doing is amplifying the power at this point while the headunit will be doing all of the frequency equalization. Go to your headunit and set your headunit cutoff the hp at 63hz-80hz depending on how well your doors respond to playing that low of a frequency then turn your headunit to around where you would normally listen and turn up the gain on the amplifier until your reach optimal listening level while sounding good. If you need help with the crossover settings on your headunit please provide the make/model of your head unit as well.

A good tutorial if you need help figuring out the sequence of entering data. http://www.hometheatershack.com/forums/diy-subwoofers-general-discussion/6330-winisd-pro-tutorial-download-detailed-guide-how-use-winisd-pro.html

He and Steve came on here once to try to defend them as well. That fails pretty good when you are on a forum that won't delete or hide posts to moderate.

Their new amps won't strap with the old ones. That blows. Great deal? Sorry for the comment !

We upgraded these amps to freshen things up since we haven't in 10+ years. We understand that for those of you who may have the other model amps that this may put some stress on you if you are trying to add to your existing set-up. We are trying our best to appease everyone we can while being innovative and keep SoundQubed from being stagnant. If there is anything we can do to help please let us know. You could have warned your existing customers of the change. Sorry for the comment !

We upgraded these amps to freshen things up since we haven't in 10+ years. We understand that for those of you who may have the other model amps that this may put some stress on you if you are trying to add to your existing set-up. We are trying our best to appease everyone we can while being innovative and keep SoundQubed from being stagnant. If there is anything we can do to help please let us know. You could have warned your existing customers of the change. We had a huge blow out sale on the existing amps and told people the change was coming - Did you recently purchase an amp or is it an older amp? A older amp when you were AQ.

I will find a better company.

How much deadening and other prep work did you do before installing the speakers?