slim142

Ok so I want to have something clear. Knukonceptz does NOT use pure copper on their cables. I should AVOID them if I want the BEST efficiency right? After a quick look, I want to get this for my Big 3, Amp power wire and ground wires http://weldingsupply.securesites.com/cgi-bin/spider.pl?304-1330B||1|146| Is that one right?

Sorry man, we aren't doing measurements lol. Thats the best I can do, is just tell you the sizes. I'm not a tailer lol. Sorry well I wasnt asking for every single piece of information you can possible get from a shirt armpit to armpit measure would be enough. Am I asking for too much now?

Well since it looks like it wont go any lower than $30 Can I get the measurements for M and L sizes? I wouldnt like to get one too big or too small

Finally!!!! A Gap filler between the D and I

I thought this was $30 before the group buy? Cause I was about to get one, but decided to hold on cause of some other priorities.

I will be getting a new car soon. I honestly dont want to use my current 4 gauge as it limits me to <1300rms I want to go straight to zero gauge so I dont have to worry about the wire in the future. I wanted to go for Kicker, but wire is wire and Knukonceptz seems to have a good reputation here and seems to be cheaper. I also heard about Welding Supplies, they seem like another good option. However, I recently read a thread were one of the wires (dont know if Knukonceptz or Welding) was made of CCA (copper covered aluminum I believe). All I remember was that CCA wire should be avoided. So now I ask, which one is the one to go for? I really cant make a mistake since I'll be buying a decent amount of wiring. Also, I thought about running 2/0 (NOT 2 gauge), but I was told it was overkill. If I wanted to use 2/0, I should use it for the Big 3 only. Any thoughts here?

Yes please more footage on xcon excursion and those carbons! Btw, how do you like those havoc tweets?

Congrats man!!! You been really helpful ever since I came to this forum! Thanks for sharing your knowledge!

Excuse me sir but pics would really be appreciated

Sir (ztkraptor) Your gain is that knob called LEVEL (which ranges from 9v to 0.2v) Your level (gain) knob has to match the voltage of your headunits RCA. If you have an aftermarket headunit, you will most likely have to set that to 2v or 4v depending on your headunit (some aftermarket units feature 5v RCA like my Pioneer in my signature, and some 8v). If you have a factory headunit, you will have to set your gain according to your Line output converter (LOC). If you are using high level input (getting signal from speakers to your amp), then your gain will most likely have to be set low since you will most likely clip the signal pretty fast (this is the worse way to send signal to an amp) If you smell something funny/weird, is your coil getting overheated If you smell something completely disgusting (like something getting burned badly), its you clipping the signal and about to kill your sub. Funny smell, low volume signal a notch. Burning smell, turn down the volume and most likely the bass knob.

MOAAAAAAAAAAR PICCCCCCSSSSS!!!!

Saw that too IMO, if you know what you are doing and know how to take care of your speakers, then go for it. I also want a leviathan which will power bravox speakers. Just saving up for it.

Because it has alot of parts in it... It's a ~2000-watt total RMS power Class A/B amp -- naturally it's enormous. Ok maybe Im trying to compare apples to grapes here but The leviathan is 150rms x 6 channels. 200.4 is 50watts more, but 2 channels less. I dont understand the HUGE size difference.

Best rear filling possible Also wins for best sorround system

I have a question Why is the 200.4 so big?

I dont know if I posted mines before but its on my sig I think my next upgrade will be a Leviathan. Hopefully its still under group sale by then.

I loled at Marks post hahaha

The title reminded me of the SSA Intervention video LOL Cory "they shoulda stole THAT shit instead!" hahahaha

Me, honestly dont like the idea of having subs in front right next to me. Couple of reasons, but whatever floats your boat. Interesting different ideas

Mark is at SEMA during the week and won't be able to give an update until he gets back. I see Well if you could let him know to check this thread when he comes back would be great

Thats a BAB man Wow

I'm waiting on my order from SDS and a couple other little things to tie everything in before i can install them. HOPE it can be done this weekend. *crosses fingers* Dont rush Will keep an eye on this thread

Yes please, make a video from 60hz-200Hz Im planning on using two pairs or maybe three as mids AND midbass. I dropped plans to use an 8" driver on each front door when I found out this could go as low as 50Hz (Nick has them at 50Hz). He also mentioned carbons can actually go up to 5000Hz, but Im pretty sure most people should find 2500-3000hz the sweet spot.

I didnt even notice this was a 2007 thread LMAO I thought Jacob was gonna bring back the 3000D HAHAHAHAHAHA

Hey Mark Can we get an inventory update? I want to know if there is anything I might want. Also have a friend who might be interesting, but dont want to make plans without knowing whats available first.