sefugi

Link to Big 3 Thread:

Welcome!!

Here is the direction I went with my Blazer. With the room and possibilities they hold, I am sure you will do something nice with yours. I don't blame your son, I would have wanted that too!!

Midbass mount design is pretty slick, lookin' forward to how it comes together!!

And then there were 2!!

Builder handled the motor once we pulled it. Problem with the cam, ate a couple of lifters. I think it was a bad grind, but can't say I never saw it before or after. Grasshopper figured since it needed a new cam he would put in a roller cam. Zinc in the motor oil today is partly to blame, (the lack of it) Also when starting a motor with a flat tappet for the first time it should be run around 2000 2500 rpm for the first 30 minutes with Break-In Oil Additive. but with a roller cam no such problems That's why we were pretty blown away about this situation, because we added zinc and ran a breakin of 30 minutes @ 2200rpm. Oil pressure looked ggod the whole time, it wasn't till the next day or so and the oil pressure had dropped. Like you said, with the roller it is a done deal. Thanks for the post!

Happy Birthday!!

Go with the recomended air space the results will show!! Link to recommended enclosures: http://www.soundsolutionsaudio.com/index.php/downloads/enclosure-designs/category/15-icon.html

Sorry I was a liittle slow on checkin out the vids. Guess it's movin' some air when you can't hang onto paper blowing out the window!

Gonna have to drain the gas tank, possibly even pull it so clean it out. Fuel gets really funky after it sits for a while and you don't want to be pumping that mess into the injectors any more than it already has. I would vote to get it to fire off and try to run( not for a long time, just enough to know you got something to work with) before you go dumping a lot of money into it.

Thanks, yes the bumper incident has made him more aware of his surroundings. I can understand your son's being upset, my dad got rid of a car when I was young that I always thought I would get. Blazer? That is the base I am planning my project with.

Great lookin' truck, very clean!!

Grasshopper was originally going with a SB but he got a shot at a 454 block and went with that. He works on the beach so with the weather warming up like it has he has been working 24/7, but he is puttin' back a fund for continuing his project. Thanks for the post and stay tuned...

Why Yes, Yes I would! That is why I have been tuned to this.

Thanks for the vids!! Must have been a great show!

Lookin good, have allways enjoyed watching your enclosures come together. Congrats on the expansion of your buisiness!!

Very Nice!!

Like the build on the enclosure!

X2 on the pics!!

This ^^^ Spax screws have worked the best for me. Just take your time and predrill everything first, both pieces. Clamps are your friend. Countersinking is nice but is not needed, the screws bite into the wood enough. All good tips for building your first box, taking your time is a must.

I'm liking that also!!

Sounds like it's time for a road trip to Texas. Just my .02.