cloud77

I think what everyone is trying to say, is that there is a problem somewhere that we can't see. That sub shouldn't be getting that hot. If you insist on using the gain as a wattage knob, it might get warm. You can never add enough electrical upgrades. Turn your head to that aspect, then work your way to the amp.

i read these shouldnt be used for daily use........ only burps and compititions They are pretty much modded 3ks. But if you don't run them below their ohm load capabilities they would be fine for daily.

so did you mess up the recone or no?

Bassink learned his lesson after making his sale to me. People that buy equipment of this caliber aren't stupid. Cracked basket, (around screw holes) he blamed on shipping...Coils read 7 ohms..Blamed on shipping... His shipping box = ..original beat up box he got from big john. nothing but cardboard with sub laying on maybe 25 peanuts...

In process of getting my 15" zcon reconed to a 12" but I need to build the enclosure. Car is an "04 Grand prix trunk is painted with GT MAT which I've come to realize works real well. Sub back port back is what I'm trying to accomplish for now. I'll experiment later, but have come to realize that sub back port back sounds really well wamming off the trunk in the American cars I've owned. Running a group 34 up front with 2 XS power 975s in the rear. Stock alt will be replaced with a mech 270 in the near future. So I need to build this box to a 3k setup. Sub will be ran on a mmats m3000.1 with 2 runs of welding wire with knu kollossus filling the gaps big 3 exc. I want to tune to about 34 Hz..with that being said and the power I will be running, I think that 3.0 cu ft slot port will do the trick for this 12. I know these subs like big air. But I'll be setting gain to ear and temperature. 14 sq inches of port per sounds good to me? any objections? Let me know what you think.. I will probably run the perfectly working 15" in a 4.0 cu ft box on the back seat and abuse it hard before I recone it to a 12. (or post a wall socket vid for your enjoyment)

just...MMATS there are 2 hd4000.1s on ebay for 650.00. someone buy them now please...cause I can't afford them

what?!

the zcons sound soooo good in right enclosure.

No. Already made plans to recone this. Recone on the way

MMATS +1

why go through this trouble when you can just easily construct an IB?

YES!

you're trying to use that for HT? Are you looking for a wind effect?

Didn't get much of a review of the 15" did we? This is when you clippity clipped the coils and sold it to me as a "newly reconed" woofer.

your gain is not a wattage knob.

sand it carefully?

IMO the dimensions of audiopipe and PA are just retarded.

I have motors laying around btw...

A lot of subs will sound great on 1500. I liked my Q, ZCON, RE XXX v3, RE SX, SSD, and BL all on ~1500

new owner of an M3000.1. Hope the Zcon can keep up!

MMATS

So I'll be running my SSA Zcon 12" on 3k for now until I get around to purchasing a recone for an sp4 motor I got in a trade. My problem is..I have a trunk car and limitations on box sizes. Depth and height are a problem for me. I have come to the conclusion that the biggest I can fit is an L port enclosure about 3.9-4 cubes. If I give it about 4 inches of port and still have net, will this enclosure server well to the sp4? I'll be running 3k @ the sp4. If not recommend what you all have experimented with.

how big was your sealed?

If you're going to run sleeper, just run amps that people don't normally have. Thieves normally steal your stuff after they hear how loud you were rockin down the road.

160 shipped!