NB50

They are internally wired, just there for easy of wiring.

Note to self, dont remove grass and leaves from street. Glad your OK.

Soldering arm.

0.7846730324074074 ft^3 also your slanted panel is to short, should be 11.19"

Nice, good to know.

His whole attitude sucks, it should be taken back to that other unmentionable place.

This clarion deck is supposed to be active capable and is right around your price range, problem is its not out yet. http://www.crutchfield.com/S-vmha4NovWEc/p_020CZ702/Clarion-CZ702.html There was a JVC deck that was active capable but isn't made anymore.

Yes, 4 ohm rating, manual says 330 x 6 for 2 ohm but your not going to notice the 50w difference. I know I love mine and one will be with me for quite awhile.

V1 and V2 were rated at 150 X 6 and the V3 is rated at 190 X 6, not to much to tell a difference. I kinda want to get a V3 but that means I have to try and get rid of the one I have now unless I keep it.

V1 and V2 will look alike, only way I can think of telling them apart is getting the serial number and emailing Zed to figure it out. V3's have a different board design and are easily told apart from the other two versions. V1 and V2 look like this. V3 look like this.

Impedance is not highest at tuning. There are two peaks one above and one below tuning. The impedance graph would look something like this (Blue Line) for a ported enclosure, this one is tuned to about 31hz. OP, I have that enclosure figured at about 0.94ft^3 @ 44hz after port and driver displacement.

This, or use fuses like you should have back there anyway.

http://www.soundsolutionsaudio.com/index.php/product-information/gcon.html

Little tip on promoting, quit relying on facebook, not everyone uses it. Provide all the information like date, time, place, cost, etc. Something like this is a lot better, short, to the point and not a whole lot of bullshit. Total Sports Complex 40501 Production Dr Sponsored By Xs Power And Shok Industries! Harrison Township, MI 48045 USA Tel: 5136079405 Event Date: May 5, 2012 Event Details: This will be a 1X dB Drag Racing & Bass Race event and the first show in Michigan for 2012. Sponsored by XS Power & Shok Industries with raffles & giveaways! Open practice 1:30-2pm Registration & qualifying 2-4pm Eliminations @ 4:30pm Awards @ Approx 6pm Entry: $20 for dB Drag or Bass Race. $35 for both! Team discounts available Trophies for All classes

Maybe you should post all the info here. You say its at the shop but I've also seen some places that say its on the east side by Selfridge. Kinda hard to go to a show when you don't know where its at.

You choose which coil option you need and it is asking if you want a basket if you choose yes they will ship you a basket at added cost.

http://www.youtube.com/watch?v=jdhmLUnexuc&feature=related

I want chrome 4050!!!!!!!

It adds the cost of the basket when you go to check out.

Velcro

You need a DMM for testing. Could be as simple as turning up the sub level on the head unit.

If your using .75" wood you will have to mount the subs on top of the enclosure if going with 10"s. 10" cutout is 9.25" while your internal height would be 9".

I see your rage and raise you more. Sounds absolutely sick on a decent stereo. Well not that recording but you get the idea.