Duran

Sechsy

Gotta fork over dough if you want it legally...

Well you did say you got a few blow jobs last weekend...

Freakin' tard...

I will be adding the Differential Drive (aka Dual Gap) technology when I get a chance. Though it does allow for some flexiblity in terms of keeping BL linear, it shows more benefits in power handling by increasing surface area and air flow over the coil substantially. The W7 is a very simple method: it's a standard overhung design with some machining done in the pole piece. If the right amount is done in the right places, you can achieve surprisingly linear BL, but it becomes increasingly more challenging to achieve this at very high levels of excursion. Of course, I'm of the opinion that a speaker that takes 1kW with 30mm of Xmax is more than enough for my ears. I think your due for a write up on dual gap motors!

wow you just reminded me of the reason why i don't hang around much on ssa.. how is it showing hate if you are just stating facts. cthedinger I'm glad you posted this because earlier today I was thinking to myself about how noone had any foil covered CCF. He is on DSBP too, well, he was Here on SSA we will not sugar coat anything, if you have sand in your vagina we will point and laugh not give you a douche to get it out and proceed to kiss your ass. We don't put up with bull shit. Enough off topic talk, we've thread jacked enough. Drew if you have a problem with Coleman PM him, Blak if you have a problem with Drew PM him, no need to clutter a thread.

Well there went my dinner. Thanks Julian!

Who wants to buy b-stock? I sure don't, it is called b-stock for a reason. But Don does make a great product I will give him that for sure. I fixed it thanks for letting me know. It's actually b-stock because the tiles were cut as different angles, not 90* like he wanted, and honestly I have some and you can't tell a difference.

If it's 1.4ohm/coil, that would be a D2. He said each coil was .7 No, he asked if you could wire to 1ohm or if the only option was to wire to .7, which for a single sub would mean each coil is 1.4 Learn to read n00b Aww poo. You right Brad

Just have to remove the bottom plate as it is attached to the pole piece, not a simple process if you don;t have the tools but Nick can.

It lowers motor force considerably, which beings up QTS making it perform the best in a sealed enclosure. It will not hurt anything, but won't perform as well in a vented alignment compared to a sealed alignment.

Isn't that a normal occurrence for teh Peng?

You shoulda followed him and gotten a demo, we need videos Aaron!

Shaved and smellin' good pootang top!

She was actually a pretty hot chic with a SUPER hard body. Just young. I have done a few tramp stamps where I could smell thier snatch the whole time, not to mention when they fart while you working right above their ass. Thats why I have a fan blowing away from me at ALL times. I have very hyper-sensitive smelling, and everyone smells one way or another. Cigarette smokers breath and gamey arm pits are the next worst. The joys of getting up close and personal with ppl I don't even know. Not to mention piercing the pussy when its all creamy. I generally charge someone more if they smell. I don't go near a woman if I know she isn't maintained, no way no how. I had a bad experience with that.

He came so close to tipping that thing...especially with that huge engine on the back.

That was Mark, think he had his SSA button down on. Not talking about the video Aaron

Second that.

Numbers are achieved differently. Flex is a different issue again, the loudest vehicles in the world don't flex.

Wait the guy that delivered mine wasn't Mark? I bro hugged him...

You know you want an Elise Sean

I'm diggin' it!

Probably because it's a USA only sale.