Kanaworm$

Now this is just plain ignorance on your part! How so? I know it's a little raw and I wouldn't go about it exactly this way (I would have some compassion of course) but you really think adoption is better? Pass your problem off on someone else? Your not passing on a problem to somebody else, your helping some couple who cannot have children on their own to have the chance at raising a child. Abortion in some instances is correct, but this is reckelss, irresponsibility on two young adults that should know better.

Now this is just plain ignorance on your part!

Sack up and take responsibility! Don't be a douche and run! Get together with both families and see what's best for the both of you. Nothing wrong with adoption if you cannot take care of a child properly.

Shizzon what's your opinion on the Schumacher AGM smart chargers like this one?

Are you using this online calculator?

gone to corporate CEO hours now? J/K .... keep up the great work!

YES! Take a DMM and measure current draw at the amp when playing to find out how much voltage drop you have. Did you do the "Big 3"? How many runs of 1/0 power and ground cable do you have?

Take the shipping hit and send your Fi subs to Fi to be re-coned. Top notch quality!

Not near enough port area and your amp settings are way off. Set your crossover setting to around 60-80hz, SSF between 25-35HZ and bass boost off. Set your gain to minimum and slowley turn up until you hear your subs starting to stress or distort. You have a big amplifier and hopefully you have good electrical to supply the amplifier with the proper current.

The joys of SPL is test, test and more test. And lot's of beer!

Titebond II Wood glue is what I like to use and clamps. I glue and brad nail all of my boxes and never have had one come apart. But I don't run a bazillion watts either. Just a reference in my truck (extended cab) I used (2) 4" aeros side firing on each side of my enclosure for my IA Deathrow 18" and achieved a respectable 146.3-146.5 on the SPL Labs LCD Meter at 42hz. All powered off a Sundown SAX-1200D amplifier.

Test with a DB Meter and move the box around until you find the sweet spot for your vehicle.

To hell with USED check out the screaming good deals on the Incriminator Audio Death Penalty series from the SSA Store "Black N Blue Sale"!

Budget for subs? Budget for electrical upgrades ie. Batts, alternator, wire etc?

Try 40-80hz tone.

40hz tone is what I have used when using an O-Scope.

You can split it and use 1 section for +12 and the other section for +12 remote.

I have done plenty of truck installs and side firing in a single cab has produced the best results. I have a full size GMC extended cab and ran a single IA DR 18" off 1 Sundown SAX-1200D and before I sold it, it consistently hit 146.3-146.5 on the SPL-Labs LCD Meter at 42HZ.

I tend to tune around 35hz for my tuning as that seems to sound best for my listening tastes. Your looking at roughly 2.5-3.0 cubic feet for a pair of SA-10". I would look to do 2 4" Aeros side firing into the cab corners of your truck.

Very nice! Can I trade in my 10" DCON in for a new 10" ICON .... Seriously I think it's time for an upgrade in 2012 for my Civic.

Welcome ....

MDF is just fine to use. Birch Plywood is lighter, more expensive but very good acoustical properties. But plain plywood is not recommended for sub enclosures. A link to the enclosure your referring to would be helpful.

Not at all familiar with Axiom but these sure look like a winner.