Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Featured Replies

Posted

So what is the difference between a 15in Fi BL vs a 15in FI SSD with the BP power option. With that power thing the site says it will add 200-500wrms leaving the SSD at anywhere between 1000-1300wrms, while the BL is only at 1000..... given the right box (im thinkin about 32hz), will there be any noticable difference between the two subs? The SSD is noticably cheaper than the BL so would someone like me (noob) be able to tell the difference? any recomendations?

The BL is superior. It will handle a much larger amount of power and get louder if given the same power.

BP power is included in the BL and you can add cooling (the hyper pole is included in this, and the hyper pole is an extended Pole Chamfer, Extreme Lead, and an SPL gap.

Simply put, the SSD is a very basic, beginner subwoofer. The BL is a high powered, more experienced user subwoofer.

  • Author

Ok, makes sence. so the BL is worth the extra money your paying for it. (which is still suprisingly cheap compared to some mainstream brands i was looking at).

It was the rms rattings that had me confused between the two. Alright, so how about the BL compared to the Q? they are also running similar power ratings if im not mistaken....

Ok, makes sence. so the BL is worth the extra money your paying for it. (which is still suprisingly cheap compared to some mainstream brands i was looking at).

It was the rms rattings that had me confused between the two. Alright, so how about the BL compared to the Q? they are also running similar power ratings if im not mistaken....

Do not use the Q unless you are planning on having a full sound quality oriented vehicle. The SSD, Q, and BL are rated at 1000 watts when stock. But when you start adding upgrades to the BL power handling increases, if put in a correct enclosure and your smart with the amplifier settings you can give it 1500+ watts.

the Q is based for toward sound quality.. Q for sound 'q'uality. ;)

the BL is based more towards SPL.

if you don't have much experience and low on cash then get the SSD. Even though its Fi's entry level. It can get loud. there is someone that does 150s with 2 10" SSDs with 3000 watts. So don't underestimate the SSDs. The BLs will get louder with more power handling too.

If your looking at a daily type system and don't want to spend a lot on electrical upgrades the SSD is a great buy! A very underrated subwoofer imo.

If your looking at a daily type system and don't want to spend a lot on electrical upgrades the SSD is a great buy! A very underrated subwoofer imo.

X2

If your looking at a daily type system and don't want to spend a lot on electrical upgrades the SSD is a great buy! A very underrated subwoofer imo.

X3

I have an SSD 18 and it pounds.

  • 4 weeks later...

Not trying to hijack, but this is a similar question between the Q's and BL's.

As stated in another thread, I am building a box for my pair of Q15's. After displacement, the box will be ~7.6 sqft tuned to 30-32hz. I will be running a DC Audio PIA2000.1 @ 1ohm (2200w rms +/-). My goals are "SQL". I need a daily setup that hits deep, yet can so some damage on the meter still. The Q's have worked out well, but how much of a difference would I theoretically notice by switching the Q15's out for BL15's in the exact same setup?

Not trying to hijack, but this is a similar question between the Q's and BL's.

As stated in another thread, I am building a box for my pair of Q15's. After displacement, the box will be ~7.6 sqft tuned to 30-32hz. I will be running a DC Audio PIA2000.1 @ 1ohm (2200w rms +/-). My goals are """SQL""". I need a daily setup that hits deep, yet can so some damage on the meter still. The Q's have worked out well, but how much of a difference would I theoretically notice by switching the Q15's out for BL15's in the exact same setup?

The BL's would do more "damage" on the meter. If you buy them let me know how much you want for (1) Q........... :neil:

if you don't have much experience and low on cash then get the SSD. Even though its Fi's entry level. It can get loud. there is someone that does 150s with 2 10" SSDs with 3000 watts. So don't underestimate the SSDs. The BLs will get louder with more power handling too.

Could that be you? ;)

OP, both subs are capable of getting painfully loud in the proper enclosure with the proper power. If you are going to compete and throw a chitload of power at whatever woofer it is, then get the BL unless you are going over 2000 watts... Then go on up to the BTL.

However, if this setup is for your listening pleasure alone, then as everyone has pointed out, specific goals would be helpful.

Not trying to hijack, but this is a similar question between the Q's and BL's.

As stated in another thread, I am building a box for my pair of Q15's. After displacement, the box will be ~7.6 sqft tuned to 30-32hz. I will be running a DC Audio PIA2000.1 @ 1ohm (2200w rms +/-). My goals are "SQL". I need a daily setup that hits deep, yet can so some damage on the meter still. The Q's have worked out well, but how much of a difference would I theoretically notice by switching the Q15's out for BL15's in the exact same setup?

That is not even a comparison, for those goals then go for the BL's.

Not trying to hijack, but this is a similar question between the Q's and BL's.

As stated in another thread, I am building a box for my pair of Q15's. After displacement, the box will be ~7.6 sqft tuned to 30-32hz. I will be running a DC Audio PIA2000.1 @ 1ohm (2200w rms +/-). My goals are ""SQL"". I need a daily setup that hits deep, yet can so some damage on the meter still. The Q's have worked out well, but how much of a difference would I theoretically notice by switching the Q15's out for BL15's in the exact same setup?

That is not even a comparison, for those goals then go for the BL's.

Income tax check say what?! lol

  • 3 weeks later...

Damn, I might need to get the BL's instead of SSD's. Or instead of 2 12 inch SSD's maybe 2 15 inch SSD's :D

Edited by ChargerOn22s

I liked my SSD, it got really nice and low.. defiantly a good deal.. hope the price doesn't go up with the new upgrades.

I liked my SSD, it got really nice and low.. defiantly a good deal.. hope the price doesn't go up with the new upgrades.

x2 hope it doesnt go up. I might have to buy elsewhere. What was the previous model price for a 12 inch?

I liked my SSD, it got really nice and low.. defiantly a good deal.. hope the price doesn't go up with the new upgrades.

x2 hope it doesnt go up. I might have to buy elsewhere. What was the previous model price for a 12 inch?

they updated their site and the price hasnt changed, they even added the copper coil option stock.

Recently Browsing 0

  • No registered users viewing this page.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.